Running Your First Wash, Washing Sequence

USAGE

RUNNING YOUR FIRST WASH

Before using your Washer Dryer for then first time; please check that:

1The transit bolts have been removed.

2Your Washer Dryer has been correctly connected to your water supply and your water drainage system.

3Your Washer Dryer has been connected to an appropriate mains power supply and is switched on at the socket.

Tests were carried out on your Washer Dryer at the factory; as a result, water may be left in the machine. To remove any water we recommend that the first wash is carried out without any laundry:

1Open the detergent drawer, pour in half a measuring cup of all-purpose detergent into compartment II and close the drawer.

2Select the ‘Drum Cleaning’ programme by turning the programme dial to extras. ‘drum clean’ will be displayed on the information screen.

3Press the button to select the programme.

3Press the button to begin the programme.

WASHING SEQUENCE

Please follow the steps suggested to get the best results from your washing.

Preparing your Laundry:

CAUTION: Please be aware that any foreign objects such as coins or paper clips can cause damage to your garments and components in your Washer Dryer.

27 T: 0800 0124 382

Empty all pockets on items of clothing, brush out any sand and dirt from pockets and cuffs. Close zips and fasten any hooks and eyes.

Items such as trousers, t-shirts, sweat shirts and knitted garments should be turned inside out.

Remove any weights from curtains, or place in a laundry bag.

Any loose wiring in bras and shirt collar stiffeners should be removed or sewn in.

Sorting your Laundry:

Sort your laundry by colour. Always wash whites and coloureds separately.

Dark textiles may contain excess dye and should be washed separately several times before being included in a mixed load.

Follow the instructions given in the care labels on the clothing.

Do not wash any items in the machine that the manufacturer has specified as non-washable on the care label.

Do not dry any items in the Washer Dryer that the manufacturer has specified as non-dry on the care label.

Badly soiled or stained areas can be pre-treated with liquid detergent or stain removers by following the manufacturer’s instructions.

If you use a solvent-based cleaning agent to pre-treat a stain, protect any plastic parts such as buttons. Rinse the cleaning agent off before loading the washing into the machine.

Do not use a solvent-based cleaning agent in your Washer Dryer.

Loading the Drum:

1Pull the door open using the handle.

2Select a programme before loading laundry into your Washer Dryer. If you do not select a programme the load sensor will not be activated.

3Load your items of clothing into the drum, ensuring they are loosely packed. You will achieve better wash results if you mix up large and small items. Items of varying size will help distribute the load more evenly during spinning.

T: 0800 0124 382 28