Maytag MAH9700AW* manual Heater Removal

Page 32

Disassembly Procedures

!WARNING

To avoid risk of electrical shock, personal injury or death; disconnect power to unit before servicing.

8. Lift Front Panel from bottom brackets.

NOTE: When installing the boot align the index tabs on the boot with the screws on either side of the Fill Tube.

Heater Removal

1. Disconnect power supply to unit.

2. Remove Top Cover.

3. Remove Console.

4. Remove Front Panel.

5. Remove Thermistor and Heater wiring connectors.

Boot Removal

1.Disconnect power supply to unit.

2.Remove Top Cover.

3. Remove Console.

4. Remove Front Panel.

5. Loosen boot clamp at the 12 o’clock position.

6. Loosen 10mm nut on Heater and remove Heater Element.

NOTE: Install Heater Element on top of metal bracket.

32

16025909 Rev. 0

©2005 Maytag Services

Image 32

Contents Service Important Notices for Servicers and Consumers General Information Important Safety Information Ground NeutralNeutral Side Round GroundingGrounding Instructions Important Safety Information General Information H 9 Will Not Start LeakingNo Tumble Will Not SpinWrong Water Temperature Wet ClothesSee Will Not Spin Will Not LockDescription Diagnostic Display Code Consumer Information CodesEnter / Exit Service Mode Service ModeHolds During test Cancels hold Predefined Resumes next Hold Quick Press Rotary Spin StepDiagnostic Code Display Initial Quick Spin TestHold Quick Spin Step Board Input Test OutputQuick Service Cycle LED/Switch TestSwitch Action Fast Time Down TestSelection Function Display Board Output TestSelection Component Function Display Diagnostic Codes Diagnostic Codes Description Trigger Action to be TakenGo to Will Not DrainDiagnostic codes Diag Description Trigger Action to be Code TakenExit Service Mode Diag Description Trigger Action to beOutput Test Diag Description Trigger Action to be CodeComponent Testing Information CN3 CN6 CN9 CN8 CN7 Water flow through dispenser during Wash fill Water flow through dispenser during Rinse 1 fill Water flow through dispenser during Rinse 2 fill Disassembly Procedures Disassembly Procedures Water Valve Removal Door Removal Disassembly Procedures Front Panel Removal Heater Removal Motor Removal Disassembly Procedures Drain Pump Removal 1x12 32 long Disassembly Procedures Disassembly Procedures Disassembly Procedures Disassembly Procedures Appendix a DC68-02032B 16025909 Rev WA Rning Location Considerations 16025909 Rev 16025909 Rev 16025909 Rev Appendix B 16025909 Rev 16025909 Rev 16025909 Rev 16025909 Rev 16025909 Rev 16025909 Rev 16025909 Rev 16025909 Rev 16025909 Rev 16025909 Rev 16025909 Rev 16025909 Rev 16025909 Rev 16025909 Rev Roubleshooting 16025909 Rev