JVC KD-LX330R Controlling the volume automatically Audio Cruise, To turn the demo mode on or off

Page 26

To change the FM tuner selectivity

Turns the demo mode on. The demonstration will start automatically if no sound comes in for 3 minutes.

Turns the demo mode off.

		To change the FM tuner selectivity
	ENGLISH	To change the FM tuner selectivity
	ENGLISH	— IF FILTER
		— IF FILTER
		In some areas, adjacent stations may interfere
		with each other. If this interference occurs, noise
		may be heard. This unit has been preset to
		automatically reduce this interference noise
		automatically reduce this interference noise
		(“AUTO”) when shipped from the factory.
		•	AUTO:	When this type of interference
				occurs, this unit automatically
				increases the tuner selectivity
				so that interference noise will
				be reduced. (But the stereo
				effect will also be lost.)
		•	WIDE:	Subject to the interference
				from adjacent stations, but
				sound quality will not be
				degraded and the stereo
				effect will not be lost.

To turn the demo mode on or off

—DEMO MODE

You can turn the demo mode on or off. When shipped from the factory, “DEMO ON” is selected.

• DEMO ON:

• DEMO OFF:

Note:

If the unit has been reset (and the power is on), demonstration will start if no sound comes in for

about 10 seconds.

Controlling the volume automatically (Audio Cruise)

You can select the proper cruise mode for your car.

This unit changes the volume level automatically (at 3 possible levels) based on the driving speed of your car by detecting the alternator’s generating frequency (Audio Cruise).

If you want to use this mode, follow the procedure below. When shipped from the factory, this mode is set to “CRUISE OFF.”

•CRUISE 1: Select this if your car is relatively quiet.

•CRUISE 2: Select this if your car is relatively loud.

The volume increase rate is twice as much as that of the CRUISE 1 setting.

•CRUISE OFF: Cancels Audio Cruise.

1 Press and hold SEL (select) for more than 2 seconds so that one of the PSM items appears on the display. (See page 23.)

2 Select “CRUISE MODE.”

3 Select the desired setting.

As you turn the control dial, the Audio Cruise mode changes as follows:

CRUISE 1 CRUISE 2 CRUISE OFF

26

Image 26

Contents CD RECEIVER KD-LX330RINSTRUCTIONS CD-RECEIVER RECEPTEUR CD CD-RECEIVERPrecautions How to reset your unitPosition And Reproduction Of Labels ENGLISHENGLISH CONTENTSMAINTENANCE BASIC OPERATIONSHow to use the number buttons LOCATION OF THE BUTTONSControl panel ENGLISHRemote controller ENGLISH1. Remove the battery holder Preparing the remote controllerInstalling the battery 2. Place the batteryTo turn off the power BASIC OPERATIONSTo drop the volume in a moment 1 Turn on the powerSearching a station automatically Auto search RADIO BASIC OPERATIONSListening to the radio Searching a station manually Manual searchENGLISH FM station automatic preset SSMStoring stations in memory FM1 FM2 FM3FM1 FM2 FM3 Tuning into a preset stationManual preset 1 Select the band FM1ENGLISH RDS OPERATIONSWhat you can do with RDS EON PTY Standby Reception Using Standby ReceptionTA Standby Reception ENGLISH 4 Press SEL select to finish the settingSearching your favourite programme PTY codes5 Press SEL select to finish the setting Other convenient RDS functions and adjustmentscode selected into the preset number 4 Press and hold the number button forENGLISH Automatic clock adjustmentSetting the TA volume level Station name PS NAME Station Frequency FREQUENCYENGLISH CD OPERATIONSPlaying a CD To stop play and eject the CDTo fast-forwardor reverse the track Selecting CD playback modesLocating a track or a particular portion on a CD To go to the next tracks or the previous tracksDisc Title / Performer Track Title Prohibiting CD ejectionPlaying a CD Text Current track no. and Elapsed playing time1 Select the item you want to adjust SOUND ADJUSTMENTSAdjusting the sound 2 Adjust the levelWhat is BBEII? Using the sound control memorySelecting and storing the sound modes BBE OFF CanceledRecalling the sound modes adjustmentsStoring your own sound To reset to the factory settingsBasic Procedure Setting the clockChanging the general settings PSM OTHER MAIN FUNCTIONSENGLISH Preferred Setting Mode PSM items4 Press SEL select to finish the setting ENGLISH To cancel Advanced SCM - SCM LINKBEEP SWITCH To set the clock display - CLOCK DISPENGLISH To adjust the display contrast levelTo adjust the line input level - LINE ADJ CONTRASTTo change the FM tuner selectivity Controlling the volume automatically Audio Cruise3 Select the desired setting To turn the demo mode on or offENGLISH To adjust the volume increase rate4 Press SEL select to finish the setting If Audio Cruise does not function correctlyTo erase the input characters Assigning names to the sourcesENGLISH 1 Select a source you want to assign a name toCapital letters Available charactersENGLISH Small lettersENGLISH Using the security lockRegistering the password 2 Select the character set you want to useENGLISH When Security Lock works?To change the password ENGLISH CD CHANGER OPERATIONSPlaying CDs To fast-forwardor reverse the trackTo go to a particular disc directly CanceledSelecting CD playback modes To show the CD Text informationENGLISH REPEAT1 REPEAT2 CanceledINTRO1 INTRO2 Canceled To play back only intros Intro ScanENGLISH Playing an external componentUsing a subwooferEXTERNAL COMPONENT OPERATIONS 1 Select the external componentDAB TUNER OPERATIONS Tuning into an ensemble and one of the servicesWhat is DAB system? ENGLISH3 Select a service of the ensemble you want Storing DAB services in memory4 Select a service you want to listen to DAB1 DAB2 DAB3other DAB services into other preset Tuning into a preset DAB service5 Repeat the above procedure to store preset DAB service you wantENGLISH What you can do more with DABTo use Alternative Reception PTY codes ADDITIONAL INFORMATIONENGLISH Causes TROUBLESHOOTINGSymptoms RemediesHow to handle CDs Center holder MAINTENANCEHandling CDs To keep CDs cleanTUNER SECTION SPECIFICATIONSAUDIO AMPLIFIER SECTION CD PLAYER SECTIONPlease reset your unit Haben Sie PROBLEME mit dem Betrieb?Hebt u PROBLEMEN met de bediening? Refer to page of How to reset your unitCD RECEIVER KD-LX110RINSTRUCTIONS CD-RECEIVER RECEPTEUR CD CD-RECEIVERPosition And Reproduction Of Labels How to reset your unitPrecautions ENGLISHRADIO BASIC OPERATIONS CONTENTSMAINTENANCE ENGLISHControl panel How to use the number buttonsLOCATION OF THE BUTTONS ENGLISHENGLISH Remote controllerWith an optionally purchased remote controller KD-LX110R Preparing the remote controllerInstalling the battery 1 Turn on the power To drop the volume in a momentTo turn off the power 3 Adjust the volumeSearching a station automatically Auto search RADIO BASIC OPERATIONSListening to the radio Searching a station manually Manual searchStoring stations in memory FM station automatic preset SSMManual preset of both FM and AM stations ENGLISHFM1 FM2 FM3 Tuning into a preset stationManual preset 1 Select the band FM1What you can do with RDS EON AF indicator REG indicatorRDS OPERATIONS ENGLISHPTY Standby Reception Using Standby ReceptionTA Standby Reception The same programme can be received onENGLISH 4 Press SEL select to finish the settingSearching your favourite programme PTY codes5 Press SEL select to finish the setting Other convenient RDS functions and adjustmentscode selected into the preset number 4 Press and hold the number button forENGLISH Setting the TA volume levelAutomatic clock adjustment Station name PS NAME Station Frequency FREQUENCYENGLISH CD OPERATIONSPlaying a CD To stop play and eject the CDTo fast-forwardor reverse the track Selecting CD playback modesLocating a track or a particular portion on a CD To go to the next tracks or the previous tracksTo play back only intros Intro Scan Prohibiting CD ejectionPlaying a CD Text Select text display mode while playing a CD Text1 Select the item you want to adjust SOUND ADJUSTMENTSAdjusting the sound 2 Adjust the levelBBE OFF Canceled Using the sound control memoryWhat is BBEII? Selecting and storing the sound modes2Adjust the selected item adjustmentsTo reset to the factory settings Storing your own soundBasic Procedure Setting the clockChanging the general settings PSM 2 Select a PSM item you want to adjust. See pageENGLISH Preferred Setting Mode PSM items4 Press SEL select to finish the setting To set the clock display - CLOCK DISP To cancel Advanced SCM - SCM LINKENGLISH To select the level meter - LEVELENGLISH To change the FM tuner selectivityTo turn the demo mode on or off To select the external component to useAvailable characters Assigning names to CDsTo erase the input characters 1 Select a source you want to assign aHow to Use the Provided CODE Sticker Using the security lockRegistering the password 5 Press SEL select to finish the settingENGLISH When Security Lock works?To change the password 1 Turn the control dial to enter a characterENGLISH CD CHANGER OPERATIONSPlaying CDs To fast-forwardor reverse the trackENGLISH Selecting CD playback modesCanceled To go to a particular disc directlyTo play back only intros Intro Scan CanceledCanceled ENGLISHEXTERNAL COMPONENT OPERATIONS Playing an external component3 Adjust the volume ENGLISHWhat is DAB system? DAB TUNER OPERATIONSTuning into an ensemble and one of the services ENGLISH3 Select a service of the ensemble you want Storing DAB services in memory4 Select a service you want to listen to DAB1 DAB2 DAB3ENGLISH Tuning into a preset DAB serviceDAB1 DAB2 DAB3 1 Select the DAB tuner DAB1-3ENGLISH ADDITIONAL INFORMATIONWhat you can do more with DAB To use Alternative ReceptionCauses TROUBLESHOOTINGSymptoms RemediesTo keep CDs clean MAINTENANCEHow to handle CDs When playing a CD-Ror CD-RWTUNER SECTION SPECIFICATIONSAUDIO AMPLIFIER SECTION CD PLAYER SECTIONPlease reset your unit Haben Sie PROBLEME mit dem Betrieb?Hebt u PROBLEMEN met de bediening? Refer to page of How to reset your unitTROUBLESHOOTING KD-LX330R/KD-LX110RINSTALLATION PROBLEMEN OPLOSSENELECTRICAL CONNECTIONS FRANÇAIS ENGLISHDEUTSCH NEDERLANDSund Lautsprecher