JVC KD-LX330R manual Troubleshooting, Symptoms, Causes, Remedies, English

Page 41

TROUBLESHOOTING

TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a service centre.

		Symptoms			Causes		Remedies
•	CD cannot be played back.			CD is inserted upside down.			Insert the CD correctly.

• CD sound is sometimes				You are driving on rough roads.			Stop CD play while driving on
	interrupted.						rough roads.

				CD is scratched.			Change the CD.

				Connections are incorrect.			Check the cords and
							connections.

• Sound cannot be heard from				The volume level is set to the			Adjust it to the optimum level.
	the speakers.			minimum level.

				Connections are incorrect.			Check the cords and
							connections.

•	SSM (Strong-station			Signals are too weak.			Store stations manually.
	Sequential Memory)
	automatic preset does not
	work.

•	Static noise while listening to			The antenna is not connected			Connect the antenna firmly.
	the radio.			firmly.

• “NO DISC” appears on the				No CD is in the magazine.			Insert CD.
	display.

• “RESET 8” appears on the				This unit is not connected to a			Connect this unit and the CD
	display.			CD changer correctly.			changer correctly and press the
							reset button of the CD changer.

• “RESET 1” – “RESET 7”							Press the reset button of the
	appears on the display.						CD changer.

• “EJECT ERROR” appears on				The CD player may function			Press and hold 4		for
	the display and CD cannot be			incorrectly.			more than 5 seconds.
	ejected.

• No message appears on the							While holding	¢, press the
	display but CD cannot be						reset button. Release the reset
	ejected.						button, then release		¢.
							(Be careful not to drop the CD
							when ejecting.)

•	“	” appears on the		Security lock is in use.			Enter the password.
	display.						(See page 31.)

•	This unit does not work at all.			The built-in microcomputer may			Press the reset button on the
• The CD changer does not				function incorrectly due to noise,			front panel. (See page 2.)
	work at all.			etc.

ENGLISH

41

Image 41

Contents INSTRUCTIONS KD-LX330RCD RECEIVER CD-RECEIVER RECEPTEUR CD CD-RECEIVERPosition And Reproduction Of Labels How to reset your unitPrecautions ENGLISHMAINTENANCE CONTENTSENGLISH BASIC OPERATIONSControl panel LOCATION OF THE BUTTONSHow to use the number buttons ENGLISHENGLISH Remote controllerInstalling the battery Preparing the remote controller1. Remove the battery holder 2. Place the batteryTo drop the volume in a moment BASIC OPERATIONSTo turn off the power 1 Turn on the powerListening to the radio RADIO BASIC OPERATIONSSearching a station automatically Auto search Searching a station manually Manual searchStoring stations in memory FM station automatic preset SSMENGLISH FM1 FM2 FM3Manual preset Tuning into a preset stationFM1 FM2 FM3 1 Select the band FM1ENGLISH RDS OPERATIONSWhat you can do with RDS EON PTY Standby Reception Using Standby ReceptionTA Standby Reception Searching your favourite programme 4 Press SEL select to finish the settingENGLISH PTY codescode selected into the preset number Other convenient RDS functions and adjustments5 Press SEL select to finish the setting 4 Press and hold the number button forSetting the TA volume level Automatic clock adjustmentENGLISH Station name PS NAME Station Frequency FREQUENCYPlaying a CD CD OPERATIONSENGLISH To stop play and eject the CDLocating a track or a particular portion on a CD Selecting CD playback modesTo fast-forwardor reverse the track To go to the next tracks or the previous tracksPlaying a CD Text Prohibiting CD ejectionDisc Title / Performer Track Title Current track no. and Elapsed playing timeAdjusting the sound SOUND ADJUSTMENTS1 Select the item you want to adjust 2 Adjust the levelSelecting and storing the sound modes Using the sound control memoryWhat is BBEII? BBE OFF CanceledStoring your own sound adjustmentsRecalling the sound modes To reset to the factory settingsChanging the general settings PSM Setting the clockBasic Procedure OTHER MAIN FUNCTIONSENGLISH Preferred Setting Mode PSM items4 Press SEL select to finish the setting BEEP SWITCH To cancel Advanced SCM - SCM LINKENGLISH To set the clock display - CLOCK DISPTo adjust the line input level - LINE ADJ To adjust the display contrast levelENGLISH CONTRAST3 Select the desired setting Controlling the volume automatically Audio CruiseTo change the FM tuner selectivity To turn the demo mode on or off4 Press SEL select to finish the setting To adjust the volume increase rateENGLISH If Audio Cruise does not function correctlyENGLISH Assigning names to the sourcesTo erase the input characters 1 Select a source you want to assign a name toENGLISH Available charactersCapital letters Small lettersRegistering the password Using the security lockENGLISH 2 Select the character set you want to useENGLISH When Security Lock works?To change the password Playing CDs CD CHANGER OPERATIONSENGLISH To fast-forwardor reverse the trackSelecting CD playback modes CanceledTo go to a particular disc directly To show the CD Text informationINTRO1 INTRO2 Canceled REPEAT1 REPEAT2 CanceledENGLISH To play back only intros Intro ScanEXTERNAL COMPONENT OPERATIONS Playing an external componentUsing a subwooferENGLISH 1 Select the external componentWhat is DAB system? Tuning into an ensemble and one of the servicesDAB TUNER OPERATIONS ENGLISH4 Select a service you want to listen to Storing DAB services in memory3 Select a service of the ensemble you want DAB1 DAB2 DAB35 Repeat the above procedure to store Tuning into a preset DAB serviceother DAB services into other preset preset DAB service you wantENGLISH What you can do more with DABTo use Alternative Reception PTY codes ADDITIONAL INFORMATIONENGLISH Symptoms TROUBLESHOOTINGCauses RemediesHandling CDs MAINTENANCEHow to handle CDs Center holder To keep CDs cleanAUDIO AMPLIFIER SECTION SPECIFICATIONSTUNER SECTION CD PLAYER SECTIONHebt u PROBLEMEN met de bediening? Haben Sie PROBLEME mit dem Betrieb?Please reset your unit Refer to page of How to reset your unitINSTRUCTIONS KD-LX110RCD RECEIVER CD-RECEIVER RECEPTEUR CD CD-RECEIVERPrecautions How to reset your unitPosition And Reproduction Of Labels ENGLISHMAINTENANCE CONTENTSRADIO BASIC OPERATIONS ENGLISHLOCATION OF THE BUTTONS How to use the number buttonsControl panel ENGLISHENGLISH Remote controllerWith an optionally purchased remote controller KD-LX110R Preparing the remote controllerInstalling the battery To turn off the power To drop the volume in a moment1 Turn on the power 3 Adjust the volumeListening to the radio RADIO BASIC OPERATIONSSearching a station automatically Auto search Searching a station manually Manual searchManual preset of both FM and AM stations FM station automatic preset SSMStoring stations in memory ENGLISHManual preset Tuning into a preset stationFM1 FM2 FM3 1 Select the band FM1RDS OPERATIONS AF indicator REG indicatorWhat you can do with RDS EON ENGLISHTA Standby Reception Using Standby ReceptionPTY Standby Reception The same programme can be received onSearching your favourite programme 4 Press SEL select to finish the settingENGLISH PTY codescode selected into the preset number Other convenient RDS functions and adjustments5 Press SEL select to finish the setting 4 Press and hold the number button forAutomatic clock adjustment Setting the TA volume levelENGLISH Station name PS NAME Station Frequency FREQUENCYPlaying a CD CD OPERATIONSENGLISH To stop play and eject the CDLocating a track or a particular portion on a CD Selecting CD playback modesTo fast-forwardor reverse the track To go to the next tracks or the previous tracksPlaying a CD Text Prohibiting CD ejectionTo play back only intros Intro Scan Select text display mode while playing a CD TextAdjusting the sound SOUND ADJUSTMENTS1 Select the item you want to adjust 2 Adjust the levelWhat is BBEII? Using the sound control memoryBBE OFF Canceled Selecting and storing the sound modesTo reset to the factory settings adjustments2Adjust the selected item Storing your own soundChanging the general settings PSM Setting the clockBasic Procedure 2 Select a PSM item you want to adjust. See pageENGLISH Preferred Setting Mode PSM items4 Press SEL select to finish the setting ENGLISH To cancel Advanced SCM - SCM LINKTo set the clock display - CLOCK DISP To select the level meter - LEVELTo turn the demo mode on or off To change the FM tuner selectivityENGLISH To select the external component to useTo erase the input characters Assigning names to CDsAvailable characters 1 Select a source you want to assign aRegistering the password Using the security lockHow to Use the Provided CODE Sticker 5 Press SEL select to finish the settingTo change the password When Security Lock works?ENGLISH 1 Turn the control dial to enter a characterPlaying CDs CD CHANGER OPERATIONSENGLISH To fast-forwardor reverse the trackCanceled Selecting CD playback modesENGLISH To go to a particular disc directlyCanceled CanceledTo play back only intros Intro Scan ENGLISH3 Adjust the volume Playing an external componentEXTERNAL COMPONENT OPERATIONS ENGLISHTuning into an ensemble and one of the services DAB TUNER OPERATIONSWhat is DAB system? ENGLISH4 Select a service you want to listen to Storing DAB services in memory3 Select a service of the ensemble you want DAB1 DAB2 DAB3DAB1 DAB2 DAB3 Tuning into a preset DAB serviceENGLISH 1 Select the DAB tuner DAB1-3What you can do more with DAB ADDITIONAL INFORMATIONENGLISH To use Alternative ReceptionSymptoms TROUBLESHOOTINGCauses RemediesHow to handle CDs MAINTENANCETo keep CDs clean When playing a CD-Ror CD-RWAUDIO AMPLIFIER SECTION SPECIFICATIONSTUNER SECTION CD PLAYER SECTIONHebt u PROBLEMEN met de bediening? Haben Sie PROBLEME mit dem Betrieb?Please reset your unit Refer to page of How to reset your unitINSTALLATION KD-LX330R/KD-LX110RTROUBLESHOOTING PROBLEMEN OPLOSSENELECTRICAL CONNECTIONS DEUTSCH ENGLISHFRANÇAIS NEDERLANDSund Lautsprecher