EXTERNAL COMPONENT OPERATIONS
| |
SSM |
|
BAND |
|
TP/RDS | PTY |
Playing an external component Using a subwoofer
ENGLISH
When connecting an external component to the LINE IN plugs on the rear, you can select the component as the sound source.
1 Select the external component.
Each time you press the
button, the source changes as described on page 7.
2 Operate the external component.
Note:
For the external component connection, see the
Installation/Connection Manual (separate volume).
By connecting a subwoofer to the SUBWOOFER OUT plugs on the rear, you can enjoy enhanced bass sounds and a more realistic theater atmosphere in your car.
•Refer also to the instructions supplied with your subwoofer.
When a subwoofer is connected to this unit, select an appropriate cutoff frequency level for your subwoofer.
To set the subwoofer cutoff frequency, see “To select the subwoofer cutoff frequency — WOOFER FREQ” on page 25.
To adjust the subwoofer output volume, see
“Adjusting the sound” on page 19.
35