JVC KD-LX330R manual When Security Lock works?, To change the password, English

Page 31

When Security Lock works?

When Security Lock works?

Once you register the password, “ ” appears on the display, and the unit will ask you to enter the password in the following cases:

•When you turn on the unit for the first time after re-installing the unit.

•When you turn on the unit for the first time after replacing the car battery.

To use this unit, you must enter the correct password by following the procedure below.

1 Press DISP (display) to select the character set you want.

2 Turn the control dial to enter a character.

3 Press ¢or 4 to move the character entry position.

4 Repeat steps 1 to 3 to enter the entire password (4 letters) correctly, then press SEL (select).

•If you enter the correct password, the security lock is canceled and you can use the unit normally.

•In the following cases, the security lock is not canceled (“NOT ACCEPT” appears on the display) then the unit turns off. (The unit will never turn on unless you press the reset button on the front panel. See page 2.)

–If you enter an incorrect password then press SEL (select).

–If you cannot finish entering the correct password within 30 seconds.

If you enter an incorrect character while entering the password

Press 4 to move back the character entry position over the incorrect character, then repeat steps 1 and 2 to select the correct character.

To change the password

If you want to change the password after you have registered it, follow the procedure below.

1 Press SEL (select) and ¢ at the same time for more than 2 seconds.

“ ” appears on the display.

2 Enter the current password correctly, then press SEL (select).

The unit enters password entry mode.

3 Enter a new password as you want, then press SEL (select).

The password flashes on the display for a while, then the unit returns to the normal operation mode.

•See page 30 for details on how to enter the password.

ENGLISH

31

Image 31

Contents CD-RECEIVER RECEPTEUR CD CD-RECEIVER KD-LX330RINSTRUCTIONS CD RECEIVERENGLISH How to reset your unitPosition And Reproduction Of Labels PrecautionsBASIC OPERATIONS CONTENTSMAINTENANCE ENGLISHENGLISH LOCATION OF THE BUTTONSControl panel How to use the number buttonsENGLISH Remote controller2. Place the battery Preparing the remote controllerInstalling the battery 1. Remove the battery holder1 Turn on the power BASIC OPERATIONSTo drop the volume in a moment To turn off the powerSearching a station manually Manual search RADIO BASIC OPERATIONSListening to the radio Searching a station automatically Auto searchFM1 FM2 FM3 FM station automatic preset SSMStoring stations in memory ENGLISH1 Select the band FM1 Tuning into a preset stationManual preset FM1 FM2 FM3What you can do with RDS EON RDS OPERATIONSENGLISH TA Standby Reception Using Standby ReceptionPTY Standby Reception PTY codes 4 Press SEL select to finish the settingSearching your favourite programme ENGLISH4 Press and hold the number button for Other convenient RDS functions and adjustmentscode selected into the preset number 5 Press SEL select to finish the settingStation name PS NAME Station Frequency FREQUENCY Automatic clock adjustmentSetting the TA volume level ENGLISHTo stop play and eject the CD CD OPERATIONSPlaying a CD ENGLISHTo go to the next tracks or the previous tracks Selecting CD playback modesLocating a track or a particular portion on a CD To fast-forwardor reverse the trackCurrent track no. and Elapsed playing time Prohibiting CD ejectionPlaying a CD Text Disc Title / Performer Track Title2 Adjust the level SOUND ADJUSTMENTSAdjusting the sound 1 Select the item you want to adjustBBE OFF Canceled Using the sound control memorySelecting and storing the sound modes What is BBEII?To reset to the factory settings adjustmentsStoring your own sound Recalling the sound modesOTHER MAIN FUNCTIONS Setting the clockChanging the general settings PSM Basic Procedure4 Press SEL select to finish the setting Preferred Setting Mode PSM itemsENGLISH To set the clock display - CLOCK DISP To cancel Advanced SCM - SCM LINKBEEP SWITCH ENGLISHCONTRAST To adjust the display contrast levelTo adjust the line input level - LINE ADJ ENGLISHTo turn the demo mode on or off Controlling the volume automatically Audio Cruise3 Select the desired setting To change the FM tuner selectivityIf Audio Cruise does not function correctly To adjust the volume increase rate4 Press SEL select to finish the setting ENGLISH1 Select a source you want to assign a name to Assigning names to the sourcesENGLISH To erase the input charactersSmall letters Available charactersENGLISH Capital letters2 Select the character set you want to use Using the security lockRegistering the password ENGLISHTo change the password When Security Lock works?ENGLISH To fast-forwardor reverse the track CD CHANGER OPERATIONSPlaying CDs ENGLISHTo show the CD Text information CanceledSelecting CD playback modes To go to a particular disc directlyTo play back only intros Intro Scan REPEAT1 REPEAT2 CanceledINTRO1 INTRO2 Canceled ENGLISH1 Select the external component Playing an external componentUsing a subwooferEXTERNAL COMPONENT OPERATIONS ENGLISHENGLISH Tuning into an ensemble and one of the servicesWhat is DAB system? DAB TUNER OPERATIONSDAB1 DAB2 DAB3 Storing DAB services in memory4 Select a service you want to listen to 3 Select a service of the ensemble you wantpreset DAB service you want Tuning into a preset DAB service5 Repeat the above procedure to store other DAB services into other presetTo use Alternative Reception What you can do more with DABENGLISH ENGLISH ADDITIONAL INFORMATIONPTY codes Remedies TROUBLESHOOTINGSymptoms CausesTo keep CDs clean MAINTENANCEHandling CDs How to handle CDs Center holderCD PLAYER SECTION SPECIFICATIONSAUDIO AMPLIFIER SECTION TUNER SECTIONRefer to page of How to reset your unit Haben Sie PROBLEME mit dem Betrieb?Hebt u PROBLEMEN met de bediening? Please reset your unitCD-RECEIVER RECEPTEUR CD CD-RECEIVER KD-LX110RINSTRUCTIONS CD RECEIVERENGLISH How to reset your unitPrecautions Position And Reproduction Of LabelsENGLISH CONTENTSMAINTENANCE RADIO BASIC OPERATIONSENGLISH How to use the number buttonsLOCATION OF THE BUTTONS Control panelWith an optionally purchased remote controller Remote controllerENGLISH Installing the battery Preparing the remote controllerKD-LX110R 3 Adjust the volume To drop the volume in a momentTo turn off the power 1 Turn on the powerSearching a station manually Manual search RADIO BASIC OPERATIONSListening to the radio Searching a station automatically Auto searchENGLISH FM station automatic preset SSMManual preset of both FM and AM stations Storing stations in memory1 Select the band FM1 Tuning into a preset stationManual preset FM1 FM2 FM3ENGLISH AF indicator REG indicatorRDS OPERATIONS What you can do with RDS EONThe same programme can be received on Using Standby ReceptionTA Standby Reception PTY Standby ReceptionPTY codes 4 Press SEL select to finish the settingSearching your favourite programme ENGLISH4 Press and hold the number button for Other convenient RDS functions and adjustmentscode selected into the preset number 5 Press SEL select to finish the settingStation name PS NAME Station Frequency FREQUENCY Setting the TA volume levelAutomatic clock adjustment ENGLISHTo stop play and eject the CD CD OPERATIONSPlaying a CD ENGLISHTo go to the next tracks or the previous tracks Selecting CD playback modesLocating a track or a particular portion on a CD To fast-forwardor reverse the trackSelect text display mode while playing a CD Text Prohibiting CD ejectionPlaying a CD Text To play back only intros Intro Scan2 Adjust the level SOUND ADJUSTMENTSAdjusting the sound 1 Select the item you want to adjustSelecting and storing the sound modes Using the sound control memoryWhat is BBEII? BBE OFF CanceledStoring your own sound adjustmentsTo reset to the factory settings 2Adjust the selected item2 Select a PSM item you want to adjust. See page Setting the clockChanging the general settings PSM Basic Procedure4 Press SEL select to finish the setting Preferred Setting Mode PSM itemsENGLISH To select the level meter - LEVEL To cancel Advanced SCM - SCM LINKENGLISH To set the clock display - CLOCK DISPTo select the external component to use To change the FM tuner selectivityTo turn the demo mode on or off ENGLISH1 Select a source you want to assign a Assigning names to CDsTo erase the input characters Available characters5 Press SEL select to finish the setting Using the security lockRegistering the password How to Use the Provided CODE Sticker1 Turn the control dial to enter a character When Security Lock works?To change the password ENGLISHTo fast-forwardor reverse the track CD CHANGER OPERATIONSPlaying CDs ENGLISHTo go to a particular disc directly Selecting CD playback modesCanceled ENGLISHENGLISH CanceledCanceled To play back only intros Intro ScanENGLISH Playing an external component3 Adjust the volume EXTERNAL COMPONENT OPERATIONSENGLISH DAB TUNER OPERATIONSTuning into an ensemble and one of the services What is DAB system?DAB1 DAB2 DAB3 Storing DAB services in memory4 Select a service you want to listen to 3 Select a service of the ensemble you want1 Select the DAB tuner DAB1-3 Tuning into a preset DAB serviceDAB1 DAB2 DAB3 ENGLISHTo use Alternative Reception ADDITIONAL INFORMATIONWhat you can do more with DAB ENGLISHRemedies TROUBLESHOOTINGSymptoms CausesWhen playing a CD-Ror CD-RW MAINTENANCEHow to handle CDs To keep CDs cleanCD PLAYER SECTION SPECIFICATIONSAUDIO AMPLIFIER SECTION TUNER SECTIONRefer to page of How to reset your unit Haben Sie PROBLEME mit dem Betrieb?Hebt u PROBLEMEN met de bediening? Please reset your unitPROBLEMEN OPLOSSEN KD-LX330R/KD-LX110RINSTALLATION TROUBLESHOOTINGELECTRICAL CONNECTIONS NEDERLANDS ENGLISHDEUTSCH FRANÇAISund Lautsprecher