JVC KD-LX330R English, To cancel Advanced SCM - SCM LINK, To set the clock display - CLOCK DISP

Page 68
To select the level meter — LEVEL
Activates the key-touch tone. Deactivates the key-touch tone.

ENGLISH

To cancel Advanced SCM — SCM LINK

You can cancel the Advanced SCM (Sound Control Memory), and unlink the sound modes and the playback sources.

When shipped from the factory, a different sound mode can be stored in memory for each source so that you can change the sound modes simply by changing the sources.

•

LINK ON:

Advanced SCM (different

 

 

sound modes for different

 

 

sources)

•

LINK OFF:

Conventional SCM (one

 

 

sound mode for all sources)

To set the clock display — CLOCK DISP

You can set the clock to be shown on the lower part of the display when the unit is turned on. When shipped from the factory, the clock is set to be shown on the display.

• CLOCK ON:

Clock display is turned on.

•CLOCK OFF: Clock display is turned off. When “CLOCK OFF” is selected, the current sound mode setting (see page 20) is shown on the upper part of the display*.

*If an external source is selected, the current sound mode setting is shown on the lower part of the display.

To select the level meter — LEVEL

You can select the level meter display according to your preference. When shipped from the factory, “NORMAL” is selected.

• NORMAL:

Normal audio level meter

 

(illuminates from bottom to

 

top)

• MIRROR:

Volume level meter

 

illuminates as if it were

 

reflected on a mirror.

• LEVEL OFF:

Level meter stays lit and does

 

not change its illumination.

• ALL OFF:

Level meter turns off.

To select the dimmer mode — DIMMER

When you turn on the car headlights, the display automatically dims (Auto Dimmer).

When shipped from the factory, Auto Dimmer is

activated.

 

• AUTO:

Activates Auto Dimmer.

•

OFF:

Cancels Auto Dimmer.

•

ON:

Always dims the display.

Note on Auto Dimmer:

Auto Dimmer equipped with this unit may not work correctly on some vehicles, particularly on those having a control dial for dimming.

In this case, set the dimmer mode to “ON” or “OFF.”

To select the telephone muting

—TELEPHONE

This mode is used when a cellular phone system is connected. Depending on the phone system used, select either “MUTING 1” or “MUTING 2,” whichever mutes the sounds from this unit. When shipped from the factory, this mode is deactivated.

•MUTING 1: Select this if this setting can mute the sounds.

•MUTING 2: Select this if this setting can mute the sounds.

•MUTING OFF: Cancels the telephone muting.

To turn on/off the key-touch tone — BEEP SW

You can deactivate the key-touch tone if you do not want it to beep each time you press a button. When shipped from the factory, the key-touch tone is activated.

• BEEP ON:

• BEEP OFF:

To select the scroll mode — SCROLL

You can select the scroll mode for the disc information if it consists of more than 10 characters. When shipped from the factory, Auto Scroll mode is set to “ONCE.”

• ONCE:

Scrolls only once.

•

AUTO:

Repeats the scroll

 

 

(in 5-second intervals).

•

OFF:

Cancels Auto Scroll.

Note:

Even if the scroll mode is set to “OFF,” you can scroll the display by pressing DISP for more than 1 second.

24

Page 67 Page 69
Image 68
Page 67 Page 69
Contents KD-LX330R INSTRUCTIONSCD RECEIVER CD-RECEIVER RECEPTEUR CD CD-RECEIVERHow to reset your unit Position And Reproduction Of LabelsPrecautions ENGLISHCONTENTS MAINTENANCEENGLISH BASIC OPERATIONSLOCATION OF THE BUTTONS Control panelHow to use the number buttons ENGLISHRemote controller ENGLISHPreparing the remote controller Installing the battery1. Remove the battery holder 2. Place the batteryBASIC OPERATIONS To drop the volume in a momentTo turn off the power 1 Turn on the powerRADIO BASIC OPERATIONS Listening to the radioSearching a station automatically Auto search Searching a station manually Manual searchFM station automatic preset SSM Storing stations in memoryENGLISH FM1 FM2 FM3Tuning into a preset station Manual presetFM1 FM2 FM3 1 Select the band FM1ENGLISH RDS OPERATIONSWhat you can do with RDS EON PTY Standby Reception Using Standby ReceptionTA Standby Reception 4 Press SEL select to finish the setting Searching your favourite programmeENGLISH PTY codesOther convenient RDS functions and adjustments code selected into the preset number5 Press SEL select to finish the setting 4 Press and hold the number button forAutomatic clock adjustment Setting the TA volume levelENGLISH Station name PS NAME Station Frequency FREQUENCYCD OPERATIONS Playing a CDENGLISH To stop play and eject the CDSelecting CD playback modes Locating a track or a particular portion on a CDTo fast-forwardor reverse the track To go to the next tracks or the previous tracksProhibiting CD ejection Playing a CD TextDisc Title / Performer Track Title Current track no. and Elapsed playing timeSOUND ADJUSTMENTS Adjusting the sound1 Select the item you want to adjust 2 Adjust the levelUsing the sound control memory Selecting and storing the sound modesWhat is BBEII? BBE OFF Canceledadjustments Storing your own soundRecalling the sound modes To reset to the factory settingsSetting the clock Changing the general settings PSMBasic Procedure OTHER MAIN FUNCTIONSENGLISH Preferred Setting Mode PSM items4 Press SEL select to finish the setting To cancel Advanced SCM - SCM LINK BEEP SWITCHENGLISH To set the clock display - CLOCK DISPTo adjust the display contrast level To adjust the line input level - LINE ADJENGLISH CONTRASTControlling the volume automatically Audio Cruise 3 Select the desired settingTo change the FM tuner selectivity To turn the demo mode on or offTo adjust the volume increase rate 4 Press SEL select to finish the settingENGLISH If Audio Cruise does not function correctlyAssigning names to the sources ENGLISHTo erase the input characters 1 Select a source you want to assign a name toAvailable characters ENGLISHCapital letters Small lettersUsing the security lock Registering the passwordENGLISH 2 Select the character set you want to useENGLISH When Security Lock works?To change the password CD CHANGER OPERATIONS Playing CDsENGLISH To fast-forwardor reverse the trackCanceled Selecting CD playback modesTo go to a particular disc directly To show the CD Text informationREPEAT1 REPEAT2 Canceled INTRO1 INTRO2 CanceledENGLISH To play back only intros Intro ScanPlaying an external componentUsing a subwoofer EXTERNAL COMPONENT OPERATIONSENGLISH 1 Select the external componentTuning into an ensemble and one of the services What is DAB system?DAB TUNER OPERATIONS ENGLISHStoring DAB services in memory 4 Select a service you want to listen to3 Select a service of the ensemble you want DAB1 DAB2 DAB3Tuning into a preset DAB service 5 Repeat the above procedure to storeother DAB services into other preset preset DAB service you wantENGLISH What you can do more with DABTo use Alternative Reception PTY codes ADDITIONAL INFORMATIONENGLISH TROUBLESHOOTING SymptomsCauses RemediesMAINTENANCE Handling CDsHow to handle CDs Center holder To keep CDs cleanSPECIFICATIONS AUDIO AMPLIFIER SECTIONTUNER SECTION CD PLAYER SECTIONHaben Sie PROBLEME mit dem Betrieb? Hebt u PROBLEMEN met de bediening?Please reset your unit Refer to page of How to reset your unitKD-LX110R INSTRUCTIONSCD RECEIVER CD-RECEIVER RECEPTEUR CD CD-RECEIVERHow to reset your unit PrecautionsPosition And Reproduction Of Labels ENGLISHCONTENTS MAINTENANCERADIO BASIC OPERATIONS ENGLISHHow to use the number buttons LOCATION OF THE BUTTONSControl panel ENGLISHENGLISH Remote controllerWith an optionally purchased remote controller KD-LX110R Preparing the remote controllerInstalling the battery To drop the volume in a moment To turn off the power1 Turn on the power 3 Adjust the volumeRADIO BASIC OPERATIONS Listening to the radioSearching a station automatically Auto search Searching a station manually Manual searchFM station automatic preset SSM Manual preset of both FM and AM stationsStoring stations in memory ENGLISHTuning into a preset station Manual presetFM1 FM2 FM3 1 Select the band FM1AF indicator REG indicator RDS OPERATIONSWhat you can do with RDS EON ENGLISHUsing Standby Reception TA Standby ReceptionPTY Standby Reception The same programme can be received on4 Press SEL select to finish the setting Searching your favourite programmeENGLISH PTY codesOther convenient RDS functions and adjustments code selected into the preset number5 Press SEL select to finish the setting 4 Press and hold the number button forSetting the TA volume level Automatic clock adjustmentENGLISH Station name PS NAME Station Frequency FREQUENCYCD OPERATIONS Playing a CDENGLISH To stop play and eject the CDSelecting CD playback modes Locating a track or a particular portion on a CDTo fast-forwardor reverse the track To go to the next tracks or the previous tracksProhibiting CD ejection Playing a CD TextTo play back only intros Intro Scan Select text display mode while playing a CD TextSOUND ADJUSTMENTS Adjusting the sound1 Select the item you want to adjust 2 Adjust the levelUsing the sound control memory What is BBEII?BBE OFF Canceled Selecting and storing the sound modesadjustments To reset to the factory settings2Adjust the selected item Storing your own soundSetting the clock Changing the general settings PSMBasic Procedure 2 Select a PSM item you want to adjust. See pageENGLISH Preferred Setting Mode PSM items4 Press SEL select to finish the setting To cancel Advanced SCM - SCM LINK ENGLISHTo set the clock display - CLOCK DISP To select the level meter - LEVELTo change the FM tuner selectivity To turn the demo mode on or offENGLISH To select the external component to useAssigning names to CDs To erase the input charactersAvailable characters 1 Select a source you want to assign aUsing the security lock Registering the passwordHow to Use the Provided CODE Sticker 5 Press SEL select to finish the settingWhen Security Lock works? To change the passwordENGLISH 1 Turn the control dial to enter a characterCD CHANGER OPERATIONS Playing CDsENGLISH To fast-forwardor reverse the trackSelecting CD playback modes CanceledENGLISH To go to a particular disc directlyCanceled CanceledTo play back only intros Intro Scan ENGLISHPlaying an external component 3 Adjust the volumeEXTERNAL COMPONENT OPERATIONS ENGLISHDAB TUNER OPERATIONS Tuning into an ensemble and one of the servicesWhat is DAB system? ENGLISHStoring DAB services in memory 4 Select a service you want to listen to3 Select a service of the ensemble you want DAB1 DAB2 DAB3Tuning into a preset DAB service DAB1 DAB2 DAB3ENGLISH 1 Select the DAB tuner DAB1-3ADDITIONAL INFORMATION What you can do more with DABENGLISH To use Alternative ReceptionTROUBLESHOOTING SymptomsCauses RemediesMAINTENANCE How to handle CDsTo keep CDs clean When playing a CD-Ror CD-RWSPECIFICATIONS AUDIO AMPLIFIER SECTIONTUNER SECTION CD PLAYER SECTIONHaben Sie PROBLEME mit dem Betrieb? Hebt u PROBLEMEN met de bediening?Please reset your unit Refer to page of How to reset your unitKD-LX330R/KD-LX110R INSTALLATIONTROUBLESHOOTING PROBLEMEN OPLOSSENELECTRICAL CONNECTIONS ENGLISH DEUTSCHFRANÇAIS NEDERLANDSund Lautsprecher
Top Page Image Contents