Electrolux 58840R user manual Drying cycle complete / removing laundry, Open door, Close the door

Page 22

22Daily use

Putting in extra items or taking items out before end of programme

1. Open loading door.

WARNING!

Laundry and drum can become hot. Risk of burns!

2.Load or remove laundry items.

3.Close loading securely. Lock must audibly lock.

4.Press the START PAUSE START PAUZE button to continue the drying cycle.

Drying cycle complete / removing laundry

Once the drying cycle is complete, display shows a blinking "0", under anti-

crease icon appear dash. If the BUZZER ZOEMER option has been chosen, an acoustic signal sounds intermittently for about one minute.

The drying cycles (except for the SHOES RACK and WOOL RACK programmes) are automatically followed by an anti-crease phase which lasts around 30 minutes. The drum rotates at intervals during this phase. This keeps the laundry loose and free of creases. The laundry can be removed at any time during the anti-crease phase. (The laundry should be taken out towards the end of the anti-crease phase

at the latest to prevent creases from forming.) If LONG ANTI-CREASE function has been selected, the anti-crease phase is lengthened by 60 minutes.

1.Open door.

2.Before removing the laundry, remove fluff from the micro-fine filter. It is best to use a damp hand for this purpose. (See “Care and cleaning” chapter.)

3.Remove laundry.

4.Turn the programme selector to OFF UIT.

After each drying cycle:

-Clean the micro-fine filter and fine filter

-Drain the condensed water container (See chapter “Care and cleaning”.)

5.Close the door.

Page 21 Page 23
Image 22
Page 21 Page 23
Contents Lavatherm 58840R Dear Customer Contents Service Important safety information General safetyInstallation Child safety UseProduct description Control panel Sorting and preparing laundry What is shown in the displayBefore first use Sorting laundryPreparing laundry Programme overview RPMT/MINLichte Strijken WOL Opening loading door / loading laundry Switching machine on / switching light onDaily use Selecting the programmeSelecting additional options Setting dryness levelSetting the pre-drainage spin speed If the washing in the washing machine wasDelicate For especially gentle drying of sensitive fabLong anti-crease phase lengthen the anti When the option is active, the Sensitive icon is onSetting child lock Setting delay timerTime Starting the programme Changing programmeOpen door Drying cycle complete / removing laundryClose the door Drying rack Min, from 30 min. up to 180 minutes Cleaning fluff filter Care and cleaningAfter cleaning do not forget to put it back Clean the entire filter area Emptying the condensate tank Cleaning the door sealEmpty condensate tank after every drying cycle Cleaning heat exchanger Drying cycleCleaning the drum Care and cleaning Turn both lock washers inwardsClean operating screen and housing Troubleshooting by yourself What to do ifStart Pauze button Changing the bulb for interior lighting Replace defective bulb Screw cover back downMachine settings Setting Implementation Buzzer permanent offTechnical data Consumption valuesAppliance positioning InstallationHints for test institutes Cotton cycle with nominal and half loadRemoving transport safety packaging Drying rack unpackingRemove the elastic band fixing the rack handle to container Electrical connectionChanging door stop For easiest unpacking turn the rack upside downPage Special accessories Intermediate installation kit for stacked washer and dryerPackaging material EnvironmentOld appliance Environmental tips Pre-draining Drying cycleService Subject to change without notice
Top Page Image Contents