Electrolux 58840R user manual Cleaning heat exchanger, Drying cycle

Page 28

28Care and cleaning

2. Pour condensed water out into a ba- sin or similar receptacle.

3. Slide outlet connections in and refit condensate tank.

If the programme has been interrup- ted as a result of the condensate tank being full: Press the START PAUSE START PAUZE button to continue the

drying cycle.

The condensate tank has a volume of approx. 4 litres. This is sufficient for around 7 kg of laundry which has previously been spun at 1000 revolutions/ minute.

The condensate can be used as distilled water, e.g. for steam ironing. However first filter the condensate (e.g. with a coffee filter) to remove any residue and small pieces of fluff.

Cleaning heat exchanger

If the HEAT EXCHANGER is displayed, the heat exchanger needs to be cleaned.

CAUTION!

Operating when the heat exchanger is blocked with fluff can damage the dryer. This also increases energy consumption.

1. Open door.

2. Open door in plinth. To do this, press the release button on the bottom of the door aperture and open the door in the plinth to the left.

3. Clean fluff from the inside of the door and the heat exchanger front chamber. Wipe the door seal with a damp cloth.

Image 28
Contents Lavatherm 58840R Dear Customer Contents Service Important safety information General safetyInstallation Child safety UseProduct description Control panel What is shown in the display Before first useSorting and preparing laundry Sorting laundryPreparing laundry Programme overview RPMT/MINLichte Strijken WOL Switching machine on / switching light on Daily useOpening loading door / loading laundry Selecting the programmeSetting dryness level Setting the pre-drainage spin speedSelecting additional options If the washing in the washing machine wasDelicate For especially gentle drying of sensitive fabLong anti-crease phase lengthen the anti When the option is active, the Sensitive icon is onSetting child lock Setting delay timerTime Starting the programme Changing programmeOpen door Drying cycle complete / removing laundryClose the door Drying rack Min, from 30 min. up to 180 minutes Cleaning fluff filter Care and cleaning After cleaning do not forget to put it back Clean the entire filter area Emptying the condensate tank Cleaning the door sealEmpty condensate tank after every drying cycle Cleaning heat exchanger Drying cycleCleaning the drum Care and cleaning Turn both lock washers inwardsClean operating screen and housing Troubleshooting by yourself What to do ifStart Pauze button Changing the bulb for interior lighting Replace defective bulb Screw cover back downMachine settings Setting Implementation Buzzer permanent offTechnical data Consumption valuesInstallation Hints for test institutesAppliance positioning Cotton cycle with nominal and half loadRemoving transport safety packaging Drying rack unpackingElectrical connection Changing door stopRemove the elastic band fixing the rack handle to container For easiest unpacking turn the rack upside downPage Special accessories Intermediate installation kit for stacked washer and dryerPackaging material EnvironmentOld appliance Environmental tips Pre-draining Drying cycleService Subject to change without notice