38Installation
1.Remove upper protection polystyr- ene parts by pulling them.
2.Remove the elastic band fixing the rack handle to container.
1 | 1 |
3.Pull slightly rack handle (not to the end). Grasp at it harder and lift it up.
For easiest unpacking turn the rack upside down
4.Take it carefully out of the drum.
5.Remove from the drum rest of pack- ing elements.
4 | 3 |
|
2
Electrical connection
Details on mains voltage, type of current and the fuses required should be taken from the type plate. The type plate is fitted near the loading aperture (see “Product description” chapter).
WARNING!
The manufacturer declines any responsibility for damage or injury through failure to comply with the above safety precautions.
Should the appliance power supply cable need to be replaced, this must be carried out by our Service Center.
The power supply cable must be accessible after installing the machine.
Connect the machine to an earthed socket, in accordance with current wiring regulations.
Changing door stop
WARNING!