Using the Controls
STEP 1
Select Signal
End of Cycle Signal
When the cycle is complete, a signal will sound several times. To turn the signal off, turn the End of Cycle Signal control to off.
STEP 2
Select Temperature
In order to select the correct temperature, turn the temperature control to Regular, Delicate or Air Fluff.
DRYER TEMPS | LOAD TYPE | |
|
| |
Regular | Sturdy cottons or labels marked | |
Tumble Dry. | ||
| ||
|
| |
| For heat sensitive items labeled | |
Delicate | Tumble Dry Low or Tumble Dry | |
| Medium. | |
|
| |
| Items which need freshening. | |
Air Fluff | Load tumbles with room | |
| temperature air. | |
|
|
STEP 3
Select Cycle
To select a cycle, rotate the control dial to the desired setting. When using an Auto Dry cycle, the control dial should point between More Dry and Less Dry for most loads.
Loads of larger or bulkier size may require the More Dry setting to completely dry the load. The Less Dry setting is best suited for lightweight fabrics or for leaving some moisture in the clothing at the end of the cycle.
Auto Dry Regular Fabrics
The Auto Dry Regular Fabrics cycle is designed to dry most cottons and linens. At the end of the cycle, the clothes are cooled for approximately 10 minutes to reduce wrinkling.
Auto Dry Wrinkle-Free Fabrics
The Auto Dry
3