Start and Programs
EN
Choosing a program
1.Plug the dryer into the electrical socket.
2.Sort your laundry according to fabric type (see Laundry).
3.Open the door and make sure the filter is clean and in place (see Maintenance).
4.Load the machine and make sure that the items are not in the way of the door seal. Close the door.
5.Choose the drying program by checking the Programs table (see Programs) as well as the indications for each type of fabric (see Laundry).
-Set the temperature with the HEAT button.
-Select a program or drying time by rotating the PROGRAMS knob clockwise.
6.Press the START button to begin.
During the drying program, you can check on your laundry and take out items that are dry while others continue drying. When you close the door again, press START in order to resume drying.
7.About 10 minutes before the program is completed, it enters the final AIR FLUFF phase (fabrics are cooled), which should always be allowed to complete.
8.Open the door, take your laundry out, clean the filter and replace it (see Maintenance).
9.Unplug the dryer.
www.aristonappliances.us
4