JVC KD-SH9700, KD-SH9750 manual Manual preset, Selecting a preset station directly

Manual preset

You can preset up to 6 stations in each band (FM1, FM2, FM3 and AM) manually.

Ex.: Storing an FM station of 88.3 MHz into the preset number 1 of the FM1 band.

1 Select the band (FM1 – 3, AM) you want to store stations into (in this example, FM1).

2Press and hold SRC for more

than 1 second.

AM FM1 3 Within about 5 seconds, press

Notes:

•A previously preset station is erased when a new station is stored in the same preset number.

•Preset stations are erased when the power supply to the memory circuit is interrupted (for example, during battery replacement). If this occurs, preset the stations again.

Tuning in to a preset station

You can easily tune in to a preset station. Remember that you must store stations first. If you have not stored them yet, see “Storing stations in memory” on pages 12 and 13.

Selecting a preset station directly

1 Select the band (FM1 – 3, AM).

ENGLISH

2 Tune in to a station (in this example, of 88.3 MHz).

Press 4 to tune in to stations of lower frequencies.

3 Press and hold the number button (in

SRC

AM FM1

FM3 FM2

1Press SRC (source) repeatedly to select the tuner.

2Press and hold SRC for more than 1 second.

The band indication on the display starts flashing.

3Within about 5 seconds (while the band indication is flashing), press SRC again. Each time you press the button, the band changes.

this example, 1) for more than 2 seconds.

The selected preset number

1flashes for a while.

4 Repeat the above procedure to store other stations into other preset numbers.

2 Select the number (1 – 6) for the preset station you want.

Note:

You can also use the 5 (up) or ∞ (down) button on the unit to select the next or previous preset stations. Each time you press the 5 (up) or ∞(down) button, the next or previous preset station is tuned in.