JVC KD-SH9750, KD-SH9700 manual Sound Adjustments, Settings, Adjust the level, DSP iEQ Fad/Bal

Page 30

ENGLISH

SOUND ADJUSTMENTS

Performing the basic sound

2 Adjust the level.

settings

To adjust fader and balance—Fad, Bal:

You can set the speaker output balance, subwoofer output level, and input level of each source.

•There is a time limit in doing the following procedure. If the setting is canceled before you finish, start from step 1 again.

1 Press SEL (select) repeatedly to show one of the basic sound setting (SEL) screens.

Make these two adjustments at the same time.

•If you are using a two-speaker system, set the fader level to “00.”

• Press 5 (up) or ∞ (down) to adjust the fader.

•Press ¢ or

4 to adjust the balance.

SEL

Each time you press the button, the adjustable items change as

follows:

DSP iEQ Fad/Bal

Basic sound settings

To adjust subwoofer output—Sub Out:

This takes effect only when a subwoofer is connected.

Canceled Vol Adj Sub Out

ATT

To increase the level.

•For DSP mode settings, see pages 25 to 27.

•For iEQ (sound mode) settings, see pages 28 and 29.

Indication

To do:

Range

 

 

 

Fad

Adjust the front

R06 (Rear only)

 

and rear speaker

 

balance.

F06 (Front only)

 

 

 

Bal

Adjust the left

L06 (Left only)

 

and right speaker

 

balance.

R06 (Right only)

Sub Out

Adjust the

00 (min.)

 

subwoofer output

 

level and cutoff

08 (max.)

 

frequency level.

Low/Mid/High

 

 

 

Vol Adj

Adjust and store

–05 (min.)

 

the input level

 

of each source.

+05 (max.)

 

 

 

To decrease the level.

You can also set an appropriate cutoff frequency level according to the subwoofer connected.

•Press ¢ or 4 to select “Low,” “Mid,” or “High.”

Low: Frequencies higher than 50 Hz are cut off to the subwoofer.

Mid: Frequencies higher than 80 Hz are cut off to the subwoofer.

High: Frequencies higher than 115 Hz are cut off to the subwoofer.

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents
KD-SH9750/KD-SH9700 For customer UseModel No Serial No Information For U.S.A How to reset your unitPrecautions SeeContents Location of the Buttons Control panelIllumination Navigation for easy operations Remote controller Remove the battery holder Installing the batteryReturn the battery holder Place the batterySelect the DSP mode and sound mode as you want To drop the volume in a momentTo turn off the power Select the sourceCanceling the display Setting the clockDemonstration Selecting the level meter StandardMeter Select the band FM1 3, AM Start searching a station Radio OperationsSearching a station automatically Auto search To stop searching before a station is receivedSearching a station manually Manual search Select the band FM1 3, AMReceive FM station automatic preset SSMStoring stations in memory Select the FM band FM1 3 you want to store FM stations intoTune in to a station in this example, of 88.3 MHz Manual presetSelecting a preset station directly Press and hold the number buttonIf you forget what stations are stored in what Preset station listSelecting a preset station using Initial display patternAbout MP3 and WMA discs CD OperationsPlaying a disc Open the control panelAudio CD or a CD Text MP3 or a WMA disc Display indications when inserting anDisplay indications when inserting an To stop play and eject the discWhat is ImageLink To fast-forward or reverse the trackTo go to the next or previous tracks How to go to the desired track quickly To go to a track quicklyLocating a folder on a disc To go to a folder directlyTo skip to the next or previous folder Only on the remote controller Folder To select a track and start playbackTo select a folder and start playback You want to play Select the number 1 6 for the trackRandom Disc Random Off Selecting playback modesTo play back tracks repeatedly Repeat Play Random Folder Random Disc Random OffProhibiting disc ejection To play back only intros Intro ScanChanging the display pattern While playing an audio CD or a CD Text disc Initial displayDSP Operations Selecting the DSP modes To make further precise settings for the DSP modes Adjust the DSP effect level-1, 2, or Press SEL select once to show the DSP mode selection screen Press number button Select 4ch for the fourAs you rotate it, the car size Speaker system, and 2ch for Two speaker systemLast selected sound mode is called up Flat No sound mode is appliedTo cancel the sound mode, select Flat Equalizer OperationsStore the adjustment you made Enter the sound adjustment modeIf you want to cancel the adjustment Adjust the level Sound AdjustmentsSettings Canceled Vol Adj Sub OutTo adjust the input level of each source -Vol Adj Show the BBE Digital adjustment screenBBE 1 BBE 2 BBE BBE Off Canceled Select the effect levelImport the images Install / Start the programGraphic Displays Retouch and edit the imagesPress number button 6 to show the download selection screen Press Mode M after the disc is detectedDownloading images and animations Buttons and the 5 upFile Select highlight one of the listedItems for which you want to download File nameSelect a file you want to download Deleting unwanted filesTo delete all the stored files at a time If it is OK, press number button 1 to start downloadingSource indication screen To delete the file stored PowerOn, PowerOff,To delete the stored files for Picture one by one ErasureGraphics setting screen appears on Display Setting or Ending ending screenSetting Select UserSelect UserPict To select a still image for graphic display-User PictureSelect UserMovie, UserSlide, or UserPict Select a file you wantAdjust the PSM item selected Basic ProcedureAdjust Other Main FunctionsPreferred Setting Mode PSM items LCD Type To adjust the display contrast level ContrastTo show the graphics on the display- Graphics To select the source animation on the display-KeyIn CFMTo change the AM/FM channel intervals -Area To turn on/off the power amplifier switch- PowerAmpTo change the FM tuner selectivity -IF Filter To turn on/off the key-touch tone-BeepSelect From- To to set the timer for the dimmer mode Press ¢ or 4to select Dimmer Set the timerCapital a z small Assigning names to the sourcesTo erase the entered characters Select a characterWhen using the remote controller Press and hold 0 until the angle adjustment screen appearsAdjust the angle to the position you want Changing the control panel angleDetaching the control panel Attaching the control panelUnlock the control panel Playing discs When the current disc is an audio CD or a CD Text discCD Changer Operations Select the CD automatic changerTo change the display pattern When the current disc is an MP3 discTo go to a particular disc directly To go to the next track or the previous tracksPress Mode M while playing When playing an MP3 disc using a JVC MP3 Following operations are only possibleEither on the same or different hierarchy levels To select a disc using the disc lists Select the number 1 6 for the disc you want to playDisplay can show only six names at a time To play back tracks at random Random Selecting playback modesPlay Random Folder Random Disc Random Off Random AllRepeat Track Repeat Disc Repeat Off Repeat Track Repeat FolderIntro Off For KD-SH9700 External Component OperationsFor KD-SH9750 Select the external component LineAdditional Information Sound modes preset frequency level settingsSound Preset equalizing values Mode Available charactersTroubleshooting Symptoms Causes RemediesCD Changer Graphics MP3/WMA Playback Maintenance Handling discsAM Tuner SpecificationsFM Tuner Sensitivity 20 ∝V Selectivity 35 dBCall Antes de instalar Pulse Power cannot be turned onBefore mounting Press Avant le montage Appuyer surAsegúrese de conservar las manijas después de instalarlo Be sure to keep the handles after installing itNota Be sure to ground this unit to the car’s chassisSalida de Subwoofer Véase diagrama B Véase diagrama BVéase diagrama B Fusible de 15 a Naranja con rayas blancas To car light control switchKD-SH9750 External componentMultiple session Mixed-CDEnhanced-CD Mixed-CD CD mixéCompatible à la fois avec les fichiers MP3 et WMA KD-LH3150, KD-LH3100 compatible with only MP3 filesCompatible con ambos archivos MP3 y WMA Discs containing both MP3 files and WMA files= Follow the procedure Å described below Keep this Important sheet together with the InstructionsMise en service des images et animations transférées Activating the downloaded images and animationsActivación de imágenes y animaciones descargadas English
Top Page Image Contents