JVC KD-SH9700, KD-SH9750 manual Show the BBE Digital adjustment screen, Select the effect level

Page 31

To adjust the input level of each source —Vol Adj:

This setting is required for each source except FM. Before making an adjustment, select an appropriate source for which you want to make an adjustment.

Once you have made an adjustment, it is memorized, and you will not need to adjust the volume level each time you change the source.

Adjust to match the input level to the FM sound level.

•You cannot make an adjustment if the source is FM. “FIX” will appear.

Making sounds natural —BBE Digital

BBE Digital* is a new digital processing method to restore the brilliance and clarity of the original live sound in recording, broadcasts, etc.

When a speaker reproduces sound, it introduces frequency-dependent phase shifting, causing high-frequency sounds to take longer to reach the ear than low frequency sounds. BBE Digital adjusts the phase relationship between the low, mid and high frequencies by adding a progressively longer delay time to the low and mid frequencies, so that all frequencies reach the listener’s ears at the proper time.

ENGLISH

ATT

To increase the level.

1 Show the BBE Digital adjustment screen.

To decrease the level.

BBE

The current BBE level is shown on the display.

If the (INPUT OVER) indicator appears on the display, and sounds are distorted

The input level through the external component (LINE IN) is set at a high level (more than 1.5 Vrms).

If this happens, adjust the output level on the connected component so that the

(INPUT OVER) indicator will not appear.

(INPUT OVER) indicator

2 Select the effect level.

Each time you press the button,

BBE

the effect level changes as

 

follows:

BBE 1BBE 2 BBE 3

BBE Off

(Canceled)

As the number gets higher, the effect level becomes stronger.

When shipped from the factory, the effect level is set to “BBE Off” (BBE Digital is canceled).

Note:

If “V.CANCEL” is selected for the DSP mode, you cannot change the BBE level.

*Manufactured under license from BBE Sound, Inc.

Licensed by BBE Sound , Inc. under USP4638258 and 4482866. BBE and BBE symbol are registered trademarks of BBE Sound, Inc.

31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents For customer Use KD-SH9750/KD-SH9700Model No Serial No See How to reset your unitPrecautions Information For U.S.AContents Control panel Location of the ButtonsIllumination Navigation for easy operations Remote controller Place the battery Installing the batteryReturn the battery holder Remove the battery holderSelect the source To drop the volume in a momentTo turn off the power Select the DSP mode and sound mode as you wantSetting the clock Canceling the displayDemonstration Standard Selecting the level meterMeter To stop searching before a station is received Radio OperationsSearching a station automatically Auto search Select the band FM1 3, AM Start searching a stationSelect the band FM1 3, AM Searching a station manually Manual searchSelect the FM band FM1 3 you want to store FM stations into FM station automatic preset SSMStoring stations in memory ReceivePress and hold the number button Manual presetSelecting a preset station directly Tune in to a station in this example, of 88.3 MHzInitial display pattern Preset station listSelecting a preset station using If you forget what stations are stored in whatOpen the control panel CD OperationsPlaying a disc About MP3 and WMA discsTo stop play and eject the disc Display indications when inserting anDisplay indications when inserting an Audio CD or a CD Text MP3 or a WMA discTo fast-forward or reverse the track What is ImageLinkTo go to the next or previous tracks To go to a track quickly How to go to the desired track quicklyTo go to a folder directly Locating a folder on a discTo skip to the next or previous folder Only on the remote controller You want to play Select the number 1 6 for the track To select a track and start playbackTo select a folder and start playback FolderRandom Folder Random Disc Random Off Selecting playback modesTo play back tracks repeatedly Repeat Play Random Disc Random OffTo play back only intros Intro Scan Prohibiting disc ejectionWhile playing an audio CD or a CD Text disc Initial display Changing the display patternSelecting the DSP modes DSP OperationsAdjust the DSP effect level-1, 2, or To make further precise settings for the DSP modesPress SEL select once to show the DSP mode selection screen Speaker system, and 2ch for Two speaker system Select 4ch for the fourAs you rotate it, the car size Press number buttonEqualizer Operations Flat No sound mode is appliedTo cancel the sound mode, select Flat Last selected sound mode is called upEnter the sound adjustment mode Store the adjustment you madeIf you want to cancel the adjustment Canceled Vol Adj Sub Out Sound AdjustmentsSettings Adjust the levelSelect the effect level Show the BBE Digital adjustment screenBBE 1 BBE 2 BBE BBE Off Canceled To adjust the input level of each source -Vol AdjRetouch and edit the images Install / Start the programGraphic Displays Import the imagesButtons and the 5 up Press Mode M after the disc is detectedDownloading images and animations Press number button 6 to show the download selection screenFile name Select highlight one of the listedItems for which you want to download FileIf it is OK, press number button 1 to start downloading Deleting unwanted filesTo delete all the stored files at a time Select a file you want to downloadErasure To delete the file stored PowerOn, PowerOff,To delete the stored files for Picture one by one Source indication screenSelect User Setting or Ending ending screenSetting Graphics setting screen appears on DisplaySelect a file you want To select a still image for graphic display-User PictureSelect UserMovie, UserSlide, or UserPict Select UserPictOther Main Functions Basic ProcedureAdjust Adjust the PSM item selectedPreferred Setting Mode PSM items To select the source animation on the display-KeyIn CFM To adjust the display contrast level ContrastTo show the graphics on the display- Graphics LCD TypeTo turn on/off the key-touch tone-Beep To turn on/off the power amplifier switch- PowerAmpTo change the FM tuner selectivity -IF Filter To change the AM/FM channel intervals -AreaPress ¢ or 4to select Dimmer Set the timer Select From- To to set the timer for the dimmer modeSelect a character Assigning names to the sourcesTo erase the entered characters Capital a z smallChanging the control panel angle Press and hold 0 until the angle adjustment screen appearsAdjust the angle to the position you want When using the remote controllerAttaching the control panel Detaching the control panelUnlock the control panel Select the CD automatic changer When the current disc is an audio CD or a CD Text discCD Changer Operations Playing discsTo go to the next track or the previous tracks When the current disc is an MP3 discTo go to a particular disc directly To change the display patternPress Mode M while playing Following operations are only possible When playing an MP3 disc using a JVC MP3Either on the same or different hierarchy levels Select the number 1 6 for the disc you want to play To select a disc using the disc listsDisplay can show only six names at a time Random Folder Random Disc Random Off Random All Selecting playback modesPlay To play back tracks at random RandomRepeat Track Repeat Folder Repeat Track Repeat Disc Repeat OffIntro Off Select the external component Line External Component OperationsFor KD-SH9750 For KD-SH9700Available characters Sound modes preset frequency level settingsSound Preset equalizing values Mode Additional InformationSymptoms Causes Remedies TroubleshootingCD Changer Graphics MP3/WMA Playback Handling discs MaintenanceSensitivity 20 ∝V Selectivity 35 dB SpecificationsFM Tuner AM TunerCall Avant le montage Appuyer sur Power cannot be turned onBefore mounting Press Antes de instalar PulseBe sure to ground this unit to the car’s chassis Be sure to keep the handles after installing itNota Asegúrese de conservar las manijas después de instalarloNaranja con rayas blancas To car light control switch Véase diagrama BVéase diagrama B Fusible de 15 a Salida de Subwoofer Véase diagrama BExternal component KD-SH9750Mixed-CD CD mixé Mixed-CDEnhanced-CD Multiple sessionDiscs containing both MP3 files and WMA files KD-LH3150, KD-LH3100 compatible with only MP3 filesCompatible con ambos archivos MP3 y WMA Compatible à la fois avec les fichiers MP3 et WMAKeep this Important sheet together with the Instructions = Follow the procedure Å described belowActivating the downloaded images and animations Mise en service des images et animations transféréesActivación de imágenes y animaciones descargadas English

KD-SH9700, KD-SH9750 specifications

The JVC KD-SH9750 and KD-SH9700 are advanced car audio receivers that have garnered attention for their impressive features and sound quality. Both models showcase JVC's commitment to delivering a refined audio experience, integrating modern technology to enhance user convenience and enjoyment.

One of the standout features of the KD-SH9750 and KD-SH9700 is their digital media playback capability. Both receivers support various audio formats, including MP3, WMA, and AAC, allowing users to enjoy their favorite music seamlessly, whether from CDs, USB drives, or connected mobile devices. The inclusion of a front-facing USB port facilitates easy connectivity, while the integrated Bluetooth technology enables hands-free calling and wireless music streaming. This means that drivers can remain focused on the road while still enjoying their favorite tracks or engaging in conversations.

The receivers are equipped with a high-quality 24-bit digital-to-analog converter (DAC), which significantly enhances audio clarity and detail. This feature is particularly appreciated by audiophiles who desire an immersive listening experience. Additionally, JVC has incorporated a sophisticated equalizer system, offering multiple preset EQ settings and a customizable 13-band graphic equalizer. This allows users to fine-tune their audio playback to match their personal preferences and the acoustic environment of their car.

Another notable characteristic of both models is their compatibility with smartphone integration features such as Android Auto and Apple CarPlay. This functionality enables users to access navigation apps, music streaming services, and other important applications directly through the receiver’s touchscreen interface. The intuitive interface makes it easy to switch between various media sources, ensuring that users can access what they want without hassle.

Furthermore, the KD-SH9750 and KD-SH9700 showcase JVC's sophisticated dual-zone technology, which provides independent control of audio settings for front and rear speakers. This feature is perfect for families or groups of friends traveling together, as it allows passengers to adjust their listening experience according to their preferences.

In terms of design, both receivers sport a sleek and modern aesthetic with vibrant display screens. The adjustable illumination settings allow users to customize the display according to their taste or the car’s interior lighting.

Overall, the JVC KD-SH9750 and KD-SH9700 represent a fusion of cutting-edge audio technology, user-friendly features, and stylish design, making them ideal for anyone looking to enhance their in-car entertainment system. Whether you are an avid music lover or someone who spends long hours on the road, these receivers offer a perfect blend of quality, convenience, and functionality.
Top Page Image Contents