JVC KD-SH9750, KD-SH9700 manual Troubleshooting, Symptoms Causes Remedies

Page 56

ENGLISH

TROUBLESHOOTING

What appears to be trouble is not always serious. Check the following points before calling a service

center.

Symptoms

Causes

Remedies

•

Sound is sometimes

You are driving on rough

Stop playback while driving on

interrupted.

roads.

rough roads.

Disc is scratched.

Change the disc.

Connections are incorrect.

Check the cords and

connections.

•

Sound cannot be heard

The “PowerAmp” setting is set

Set it to “On” (see page 42).

from the speakers.

to “Off.”

Connections are incorrect.

Check the cords and

connections.

•

CD-R/CD-RW cannot be

Disc is inserted upside down.

Insert the disc correctly.

played back.

CD-R/CD-RW is not finalized.

• Insert a finalized

•

Tracks on the CD-R/CD-RW

cannot be skipped.

CD-R/CD-RW.

• Finalize the CD-R/CD-RW

Playback

with the component which

you used for recording.

•

Disc cannot be ejected.

Disc is locked.

Unlock the disc (see page 23.)

General

•

Disc cannot be recognized

The CD player may function

While holding

, press 0

(“No Disc,” “Loading Error,”

incorrectly.

for more than 2 seconds to eject

or “Eject Error” flashes).

the disc.

•

This unit does not work at

The built-in microcomputer

Press the reset button on the

all.

may have functioned

control panel using a ball-point

incorrectly due to noise, etc.

pen (see page 2).

•

When “Reset P00” to “Reset

There is something is blocking

Press the reset button on the

P44” appears on the

the control panel movement.

control panel using a ball-point

display.

pen (see page 2). If the reset

button does not work. Check the

installation. (Ex. you have used a

screws which are longer than

specified.)

•

(INPUT

Input level through the

Adjust the output level on the

OVER) indicator appears

external component (LINE

external component.

on the display.

IN) is too high.

•

“Panel Connect Error”

The control panel is not

Remove the control panel, wipe

appears on the display.

attached correctly and firmly.

the connectors, then attach it

again (see page 46).

•

SSM automatic preset

Signals are too weak.

Store stations manually.

FM/AM

does not work.

•

Static noise while listening

The antenna is not connected

Connect the antenna firmly.

to the radio.

firmly.

56

Image 56

Contents Model No Serial No KD-SH9750/KD-SH9700For customer Use How to reset your unit PrecautionsInformation For U.S.A SeeContents Illumination Navigation for easy operations Location of the ButtonsControl panel Remote controller Installing the battery Return the battery holderRemove the battery holder Place the batteryTo drop the volume in a moment To turn off the powerSelect the DSP mode and sound mode as you want Select the sourceDemonstration Canceling the displaySetting the clock Meter Selecting the level meterStandard Radio Operations Searching a station automatically Auto searchSelect the band FM1 3, AM Start searching a station To stop searching before a station is receivedSearching a station manually Manual search Select the band FM1 3, AMFM station automatic preset SSM Storing stations in memoryReceive Select the FM band FM1 3 you want to store FM stations intoManual preset Selecting a preset station directlyTune in to a station in this example, of 88.3 MHz Press and hold the number buttonPreset station list Selecting a preset station usingIf you forget what stations are stored in what Initial display patternCD Operations Playing a discAbout MP3 and WMA discs Open the control panelDisplay indications when inserting an Display indications when inserting anAudio CD or a CD Text MP3 or a WMA disc To stop play and eject the discTo go to the next or previous tracks What is ImageLinkTo fast-forward or reverse the track How to go to the desired track quickly To go to a track quicklyTo skip to the next or previous folder Locating a folder on a discTo go to a folder directly Only on the remote controller To select a track and start playback To select a folder and start playbackFolder You want to play Select the number 1 6 for the trackSelecting playback modes To play back tracks repeatedly Repeat PlayRandom Disc Random Off Random Folder Random Disc Random OffProhibiting disc ejection To play back only intros Intro ScanChanging the display pattern While playing an audio CD or a CD Text disc Initial displayDSP Operations Selecting the DSP modesPress SEL select once to show the DSP mode selection screen To make further precise settings for the DSP modesAdjust the DSP effect level-1, 2, or Select 4ch for the four As you rotate it, the car sizePress number button Speaker system, and 2ch for Two speaker systemFlat No sound mode is applied To cancel the sound mode, select FlatLast selected sound mode is called up Equalizer OperationsIf you want to cancel the adjustment Store the adjustment you madeEnter the sound adjustment mode Sound Adjustments SettingsAdjust the level Canceled Vol Adj Sub OutShow the BBE Digital adjustment screen BBE 1 BBE 2 BBE BBE Off CanceledTo adjust the input level of each source -Vol Adj Select the effect levelInstall / Start the program Graphic DisplaysImport the images Retouch and edit the imagesPress Mode M after the disc is detected Downloading images and animationsPress number button 6 to show the download selection screen Buttons and the 5 upSelect highlight one of the listed Items for which you want to downloadFile File nameDeleting unwanted files To delete all the stored files at a timeSelect a file you want to download If it is OK, press number button 1 to start downloadingTo delete the file stored PowerOn, PowerOff, To delete the stored files for Picture one by oneSource indication screen ErasureSetting or Ending ending screen SettingGraphics setting screen appears on Display Select UserTo select a still image for graphic display-User Picture Select UserMovie, UserSlide, or UserPictSelect UserPict Select a file you wantBasic Procedure AdjustAdjust the PSM item selected Other Main FunctionsPreferred Setting Mode PSM items To adjust the display contrast level Contrast To show the graphics on the display- GraphicsLCD Type To select the source animation on the display-KeyIn CFMTo turn on/off the power amplifier switch- PowerAmp To change the FM tuner selectivity -IF FilterTo change the AM/FM channel intervals -Area To turn on/off the key-touch tone-BeepSelect From- To to set the timer for the dimmer mode Press ¢ or 4to select Dimmer Set the timerAssigning names to the sources To erase the entered charactersCapital a z small Select a characterPress and hold 0 until the angle adjustment screen appears Adjust the angle to the position you wantWhen using the remote controller Changing the control panel angleUnlock the control panel Detaching the control panelAttaching the control panel When the current disc is an audio CD or a CD Text disc CD Changer OperationsPlaying discs Select the CD automatic changerWhen the current disc is an MP3 disc To go to a particular disc directlyTo change the display pattern To go to the next track or the previous tracksPress Mode M while playing Either on the same or different hierarchy levels When playing an MP3 disc using a JVC MP3Following operations are only possible Display can show only six names at a time To select a disc using the disc listsSelect the number 1 6 for the disc you want to play Selecting playback modes PlayTo play back tracks at random Random Random Folder Random Disc Random Off Random AllIntro Off Repeat Track Repeat Disc Repeat OffRepeat Track Repeat Folder External Component Operations For KD-SH9750For KD-SH9700 Select the external component LineSound modes preset frequency level settings Sound Preset equalizing values ModeAdditional Information Available charactersTroubleshooting Symptoms Causes RemediesCD Changer Graphics MP3/WMA Playback Maintenance Handling discsSpecifications FM TunerAM Tuner Sensitivity 20 ∝V Selectivity 35 dBCall Power cannot be turned on Before mounting PressAntes de instalar Pulse Avant le montage Appuyer surBe sure to keep the handles after installing it NotaAsegúrese de conservar las manijas después de instalarlo Be sure to ground this unit to the car’s chassisVéase diagrama B Véase diagrama B Fusible de 15 aSalida de Subwoofer Véase diagrama B Naranja con rayas blancas To car light control switchKD-SH9750 External componentMixed-CD Enhanced-CDMultiple session Mixed-CD CD mixéKD-LH3150, KD-LH3100 compatible with only MP3 files Compatible con ambos archivos MP3 y WMACompatible à la fois avec les fichiers MP3 et WMA Discs containing both MP3 files and WMA files= Follow the procedure Å described below Keep this Important sheet together with the InstructionsActivación de imágenes y animaciones descargadas Mise en service des images et animations transféréesActivating the downloaded images and animations English

KD-SH9700, KD-SH9750 specifications

The JVC KD-SH9750 and KD-SH9700 are advanced car audio receivers that have garnered attention for their impressive features and sound quality. Both models showcase JVC's commitment to delivering a refined audio experience, integrating modern technology to enhance user convenience and enjoyment.

One of the standout features of the KD-SH9750 and KD-SH9700 is their digital media playback capability. Both receivers support various audio formats, including MP3, WMA, and AAC, allowing users to enjoy their favorite music seamlessly, whether from CDs, USB drives, or connected mobile devices. The inclusion of a front-facing USB port facilitates easy connectivity, while the integrated Bluetooth technology enables hands-free calling and wireless music streaming. This means that drivers can remain focused on the road while still enjoying their favorite tracks or engaging in conversations.

The receivers are equipped with a high-quality 24-bit digital-to-analog converter (DAC), which significantly enhances audio clarity and detail. This feature is particularly appreciated by audiophiles who desire an immersive listening experience. Additionally, JVC has incorporated a sophisticated equalizer system, offering multiple preset EQ settings and a customizable 13-band graphic equalizer. This allows users to fine-tune their audio playback to match their personal preferences and the acoustic environment of their car.

Another notable characteristic of both models is their compatibility with smartphone integration features such as Android Auto and Apple CarPlay. This functionality enables users to access navigation apps, music streaming services, and other important applications directly through the receiver’s touchscreen interface. The intuitive interface makes it easy to switch between various media sources, ensuring that users can access what they want without hassle.

Furthermore, the KD-SH9750 and KD-SH9700 showcase JVC's sophisticated dual-zone technology, which provides independent control of audio settings for front and rear speakers. This feature is perfect for families or groups of friends traveling together, as it allows passengers to adjust their listening experience according to their preferences.

In terms of design, both receivers sport a sleek and modern aesthetic with vibrant display screens. The adjustable illumination settings allow users to customize the display according to their taste or the car’s interior lighting.

Overall, the JVC KD-SH9750 and KD-SH9700 represent a fusion of cutting-edge audio technology, user-friendly features, and stylish design, making them ideal for anyone looking to enhance their in-car entertainment system. Whether you are an avid music lover or someone who spends long hours on the road, these receivers offer a perfect blend of quality, convenience, and functionality.