JVC KD-SH9700 Specifications, FM Tuner, AM Tuner, Sensitivity 20 ∝V Selectivity 35 dB, Panel Size

Page 59

SPECIFICATIONS

AUDIO AMPLIFIER SECTION

Maximum Power Output:

Front:

50 W per channel

Rear:

50 W per channel

Continuous Power Output (RMS):

Front:

19 W per channel into 4 Ω, 40 Hz

 

to 20 000 Hz at no more than

 

0.8% total harmonic distortion.

Rear:

19 W per channel into 4 Ω, 40 Hz

 

to 20 000 Hz at no more than

 

0.8% total harmonic distortion.

Load Impedance: 4 Ω (4 Ω to 8 Ω allowance)

Equalizer Control Range:

Frequencies: 60 Hz, 150 Hz, 400 Hz,

 

1 kHz, 2.4 kHz, 6 kHz, 12 kHz

Level:

±10 dB

Frequency Response: 40 Hz to 20 000 Hz

Signal-to-Noise Ratio: 70 dB

Line-In Level/Impedance (KD-SH9750 only): LINE IN: 1.5 V/20 kΩ load

Line-Out Level/Impedance:

KD-SH9750: 4.0 V/20 kΩ load (full scale)

KD-SH9700: 2.0 V/20 kΩ load (full scale) Output Impedance: 1 kΩ

TUNER SECTION

Frequency Range:

FM: 87.5 MHz to 107.9 MHz

(with channel interval set to 200 kHz) 87.5 MHz to 108.0 MHz

(with channel interval set to 50 kHz) AM: 530 kHz to 1 710 kHz

(with channel interval set to 10 kHz) 531 kHz to 1 602 kHz

(with channel interval set to 9 kHz)

[FM Tuner]

Usable Sensitivity: 11.3 dBf (1.0 ∝V/75 Ω)

50dB Quieting Sensitivity: 16.3 dBf (1.8 ∝V/75 Ω) Alternate Channel Selectivity (400 kHz): 65 dB Frequency Response: 40 Hz to 15 000 Hz Stereo Separation: 35 dB

Capture Ratio: 1.5 dB

[AM Tuner]

Sensitivity: 20 ∝V

Selectivity: 35 dB

CD PLAYER SECTION

Type: Compact disc player

Signal Detection System: Non-contact optical pickup (semiconductor laser)

Number of channels: 2 channels (stereo)

Frequency Response: 5 Hz to 20 000 Hz

Dynamic Range: 98 dB

Signal-to-Noise Ratio: 102 dB

Wow and Flutter: Less than measurable limit MP3 (MPEG Audio Layer 3)

Max. Bit rate: 320 Kbps WMA (Windows Media® Audio)

Max. Bit rate: 192 Kbps

GENERAL

Power Requirement:

Operating Voltage: DC 14.4 V

(11 V to 16 V allowance)

Grounding System: Negative ground Allowable Operating Temperature:

0°C to +40°C (32°F to 104°F) Dimensions (W ⋅ H ⋅ D):

Installation Size:

182 mm ⋅ 52 mm ⋅ 161 mm (7-3/16" x 2-1/16" x 6-3/8")

Panel Size:

188 mm ⋅ 58 mm ⋅ 17 mm (7-7/16" x 2-5/16" x 11/16")

Mass: 1.8 kg (4.0 lbs) (excluding accessories)

Design and specifications are subject to change without notice.

If a kit is necessary for your car, consult your telephone directory for the nearest car audio speciality shop.

ENGLISH

59

Page 58 Page 60
Image 59
Page 58 Page 60
Contents Model No Serial No KD-SH9750/KD-SH9700For customer Use See How to reset your unitPrecautions Information For U.S.AContents Illumination Navigation for easy operations Location of the ButtonsControl panel Remote controller Place the battery Installing the batteryReturn the battery holder Remove the battery holderSelect the source To drop the volume in a momentTo turn off the power Select the DSP mode and sound mode as you wantDemonstration Canceling the displaySetting the clock Meter Selecting the level meterStandard To stop searching before a station is received Radio OperationsSearching a station automatically Auto search Select the band FM1 3, AM Start searching a stationSelect the band FM1 3, AM Searching a station manually Manual searchSelect the FM band FM1 3 you want to store FM stations into FM station automatic preset SSMStoring stations in memory ReceivePress and hold the number button Manual presetSelecting a preset station directly Tune in to a station in this example, of 88.3 MHzInitial display pattern Preset station listSelecting a preset station using If you forget what stations are stored in whatOpen the control panel CD OperationsPlaying a disc About MP3 and WMA discsTo stop play and eject the disc Display indications when inserting anDisplay indications when inserting an Audio CD or a CD Text MP3 or a WMA discTo go to the next or previous tracks What is ImageLinkTo fast-forward or reverse the track To go to a track quickly How to go to the desired track quicklyTo skip to the next or previous folder Locating a folder on a discTo go to a folder directly Only on the remote controller You want to play Select the number 1 6 for the track To select a track and start playbackTo select a folder and start playback FolderRandom Folder Random Disc Random Off Selecting playback modesTo play back tracks repeatedly Repeat Play Random Disc Random OffTo play back only intros Intro Scan Prohibiting disc ejectionWhile playing an audio CD or a CD Text disc Initial display Changing the display patternSelecting the DSP modes DSP OperationsPress SEL select once to show the DSP mode selection screen To make further precise settings for the DSP modesAdjust the DSP effect level-1, 2, or Speaker system, and 2ch for Two speaker system Select 4ch for the fourAs you rotate it, the car size Press number buttonEqualizer Operations Flat No sound mode is appliedTo cancel the sound mode, select Flat Last selected sound mode is called upIf you want to cancel the adjustment Store the adjustment you madeEnter the sound adjustment mode Canceled Vol Adj Sub Out Sound AdjustmentsSettings Adjust the levelSelect the effect level Show the BBE Digital adjustment screenBBE 1 BBE 2 BBE BBE Off Canceled To adjust the input level of each source -Vol AdjRetouch and edit the images Install / Start the programGraphic Displays Import the imagesButtons and the 5 up Press Mode M after the disc is detectedDownloading images and animations Press number button 6 to show the download selection screenFile name Select highlight one of the listedItems for which you want to download FileIf it is OK, press number button 1 to start downloading Deleting unwanted filesTo delete all the stored files at a time Select a file you want to downloadErasure To delete the file stored PowerOn, PowerOff,To delete the stored files for Picture one by one Source indication screenSelect User Setting or Ending ending screenSetting Graphics setting screen appears on DisplaySelect a file you want To select a still image for graphic display-User PictureSelect UserMovie, UserSlide, or UserPict Select UserPictOther Main Functions Basic ProcedureAdjust Adjust the PSM item selectedPreferred Setting Mode PSM items To select the source animation on the display-KeyIn CFM To adjust the display contrast level ContrastTo show the graphics on the display- Graphics LCD TypeTo turn on/off the key-touch tone-Beep To turn on/off the power amplifier switch- PowerAmpTo change the FM tuner selectivity -IF Filter To change the AM/FM channel intervals -AreaPress ¢ or 4to select Dimmer Set the timer Select From- To to set the timer for the dimmer modeSelect a character Assigning names to the sourcesTo erase the entered characters Capital a z smallChanging the control panel angle Press and hold 0 until the angle adjustment screen appearsAdjust the angle to the position you want When using the remote controllerUnlock the control panel Detaching the control panelAttaching the control panel Select the CD automatic changer When the current disc is an audio CD or a CD Text discCD Changer Operations Playing discsTo go to the next track or the previous tracks When the current disc is an MP3 discTo go to a particular disc directly To change the display patternPress Mode M while playing Either on the same or different hierarchy levels When playing an MP3 disc using a JVC MP3Following operations are only possible Display can show only six names at a time To select a disc using the disc listsSelect the number 1 6 for the disc you want to play Random Folder Random Disc Random Off Random All Selecting playback modesPlay To play back tracks at random RandomIntro Off Repeat Track Repeat Disc Repeat OffRepeat Track Repeat Folder Select the external component Line External Component OperationsFor KD-SH9750 For KD-SH9700Available characters Sound modes preset frequency level settingsSound Preset equalizing values Mode Additional InformationSymptoms Causes Remedies TroubleshootingCD Changer Graphics MP3/WMA Playback Handling discs MaintenanceSensitivity 20 ∝V Selectivity 35 dB SpecificationsFM Tuner AM TunerCall Avant le montage Appuyer sur Power cannot be turned onBefore mounting Press Antes de instalar PulseBe sure to ground this unit to the car’s chassis Be sure to keep the handles after installing itNota Asegúrese de conservar las manijas después de instalarloNaranja con rayas blancas To car light control switch Véase diagrama BVéase diagrama B Fusible de 15 a Salida de Subwoofer Véase diagrama BExternal component KD-SH9750Mixed-CD CD mixé Mixed-CDEnhanced-CD Multiple sessionDiscs containing both MP3 files and WMA files KD-LH3150, KD-LH3100 compatible with only MP3 filesCompatible con ambos archivos MP3 y WMA Compatible à la fois avec les fichiers MP3 et WMAKeep this Important sheet together with the Instructions = Follow the procedure Å described belowActivación de imágenes y animaciones descargadas Mise en service des images et animations transféréesActivating the downloaded images and animations English

KD-SH9700, KD-SH9750 specifications

The JVC KD-SH9750 and KD-SH9700 are advanced car audio receivers that have garnered attention for their impressive features and sound quality. Both models showcase JVC's commitment to delivering a refined audio experience, integrating modern technology to enhance user convenience and enjoyment.

One of the standout features of the KD-SH9750 and KD-SH9700 is their digital media playback capability. Both receivers support various audio formats, including MP3, WMA, and AAC, allowing users to enjoy their favorite music seamlessly, whether from CDs, USB drives, or connected mobile devices. The inclusion of a front-facing USB port facilitates easy connectivity, while the integrated Bluetooth technology enables hands-free calling and wireless music streaming. This means that drivers can remain focused on the road while still enjoying their favorite tracks or engaging in conversations.

The receivers are equipped with a high-quality 24-bit digital-to-analog converter (DAC), which significantly enhances audio clarity and detail. This feature is particularly appreciated by audiophiles who desire an immersive listening experience. Additionally, JVC has incorporated a sophisticated equalizer system, offering multiple preset EQ settings and a customizable 13-band graphic equalizer. This allows users to fine-tune their audio playback to match their personal preferences and the acoustic environment of their car.

Another notable characteristic of both models is their compatibility with smartphone integration features such as Android Auto and Apple CarPlay. This functionality enables users to access navigation apps, music streaming services, and other important applications directly through the receiver’s touchscreen interface. The intuitive interface makes it easy to switch between various media sources, ensuring that users can access what they want without hassle.

Furthermore, the KD-SH9750 and KD-SH9700 showcase JVC's sophisticated dual-zone technology, which provides independent control of audio settings for front and rear speakers. This feature is perfect for families or groups of friends traveling together, as it allows passengers to adjust their listening experience according to their preferences.

In terms of design, both receivers sport a sleek and modern aesthetic with vibrant display screens. The adjustable illumination settings allow users to customize the display according to their taste or the car’s interior lighting.

Overall, the JVC KD-SH9750 and KD-SH9700 represent a fusion of cutting-edge audio technology, user-friendly features, and stylish design, making them ideal for anyone looking to enhance their in-car entertainment system. Whether you are an avid music lover or someone who spends long hours on the road, these receivers offer a perfect blend of quality, convenience, and functionality.
Top Page Image Contents