Amana ND-1 Select Dryness Setting, Select Options if desired, Auto Temp preferred setting

Using the Controls - Electronic Controls

STEP 1

Select Temperature

Auto Temp (preferred setting)

When Auto Temp is selected, the dryer will automatically select the most appropriate drying temperature based on the cycle and dryness settings selected.

If you prefer not to use Auto Temp, turn the temperature selector knob to the desired setting.

DRYER TEMPS	LOAD TYPE
Regular	Sturdy cottons or labels marked
	Tumble Dry.
Medium	For wrinkle-free/permanent press
	synthetics, lightweight cottons
	labeled Tumble Dry Medium.
Delicate	For heat sensitive items labeled
	Tumble Dry Low or Tumble Dry
	Medium.
Air Fluff	Items which need freshening.
	Load tumbles with room
	temperature air.

STEP 3

Select Dryness Setting

To select the dryness level, turn the Dryness Setting knob to the desired setting.

Most loads will use the Normal Dry setting. Loads of larger or bulkier size may require the More Dry setting to completely dry the load.

STEP 2

Select Options (if desired)

End of Cycle Chime

When the cycle is complete, an audible chime will sound. The chime will sound intermittently during Wrinkle Prevent. To turn the Chime off, turn the Chime selector switch to Off.

Wrinkle Prevent

Wrinkle Prevent provides approximately 95 minutes of intermittent tumbling in unheated air at the end of the cycle to reduce wrinkling. Set the Wrinkle Prevent knob On to activate this feature. The additional 95 minutes of unheated tumbling can be canceled by turning the switch to Off.

The Less Dry setting is best suited for lightweight fabrics or for leaving some moisture in the load at the end of the cycle. Damp Dry is designed to partially dry items. Use for items that lay flat or hang to dry.

STEP 4

Select Cycle

To select a cycle, rotate the Cycle Selector dial to the desired cycle. The indicator light by the cycle name will illuminate.

The dryer cycles are Sensor Dry cycles. Sensor Dry automatically senses the moisture in the load and shuts the dryer off when the selected dryness level (Damp Dry to More Dry) is reached.

5