Omega Engineering OME-A8111 manual I/O Base Address Setting, Default base address is

2.2 I/O Base Address Setting

The OME-A-8111 occupies 16 consecutive locations in I/O address space. The base address is set by DIP switch SW1. The default address is 0x220 as shown below:

A9 A8 A7 A6 A5 A4

ON

	1		2	3	4	5	6
	SW1 : BASE ADDRESS
BASE ADDR		A9	A8		A7	A6	A5	A4
200-20F		OFF	ON		ON	ON	ON	ON
210-21F		OFF	ON		ON	ON	ON	OFF
220-22F(;)		OFF	ON		ON	ON	OFF	ON
230-23F		OFF	ON		ON	ON	OFF	OFF
:		:	:		:	:	:	:
300-30F		OFF	OFF		ON	ON	ON	ON
:		:	:		:	:	:	:
3F0-3FF		OFF	OFF		OFF	OFF	OFF

(;): default base address is 0x220

OME-A-8111 Hardware Manual (ver.1.1, Jul/2003) 9