American Dryer AD-120ES manual ADE-120ES 72 Kw Electric Reversing, 3ø

ADE-120ES (72 Kw Electric) Reversing, 3ø

ELECTRICAL SERVICE SPECIFICATIONS (PER DRYER)

IMPORTANT: 208 VAC and 240 VAC ARE NOT THE SAME. When ordering, specify exact voltage.

NOTES: A. Fuse ratings are dual-element, time-delay, current limiting, class RK1 or RK5 ONLY.

B.Circuit breakers are thermal magnetic (industrial) type ONLY. For others, calculate/verify correct breaker size according to appliance amp draw rating and type of breaker used.

C.Circuit breakers for 3Ø dryers must be 3-pole type.

OVEN SIZE	SERVICE		WIRE	APPROX.		MINIMUM	FUSING	CIRCUIT
		PHASE		AMP DRAW			Dual Element
((Kw)	VOLTAGE		SERVICE			WIRE SIZE*		BREAKER
				60 Hz	50 Hz		Time Delay
72	208	3ø	3	214	---	4/0	300	300
72	240	3ø	3	186	187	3/0	250	250
72	380	3ø	3	117	117	1	150	150
72	380	3ø	4	117	117	1	150	150
72	416	3ø	3	---	107	2	150	150
72	416	3ø	4	---	107	2	150	150
72	480	3ø	3	98	---	3	150	125
72	480	3ø	4	98	---	3	150	125
72	575/600	3ø	3/4	79.4	---	4	100	110

*AWG Stranded Type Wire ... for individual lengths less than 100 feet. (Motor lead type wire is recommended)

IMPORTANT: The dryer must be connected to the electric supply shown on the data label that is affixed to the back of the dryer, at the upper right hand corner. In the case of 208 VAC or 240 VAC, the supply voltage must match the electric service specifications of the data label exactly.

WARNING: 208 VAC and 240 Volts ARE NOT THE SAME. Any damage done to dryer components due to improper voltage connections will automatically VOID THE WARRANTY.

NOTE: ADC reserves the right to make changes in specifications at any time, without notice or obligation.

23