American Dryer ML-200 manual MLS-200 Steam Hp Blower/3 Hp Drive Motor

MLS-200 (Steam)

15 Hp Blower/3 Hp Drive Motor

ELECTRIC SERIVICE SPECIFICATIONS (PER DRYER)

IMPORTANT: 208 VAC and 230 VAC ARE NOT THE SAME. When ordering, specify exact voltage.

NOTES: A. Fuse ratings are dual element-time delay-current limiting, class RK1 or RK5 ONLY.

B. Circuit breakers are thermal magnetic (industrial) type ONLY. For others, calculate/verify correct breaker size according to appliance amp draw rating and type of breaker used.

C. Circuit breakers for 3 dryers must be 3-pole type.

SERVICE		WIRE	APPROX.		MINIMUM	FUSING	CIRCUIT
	PHASE		AMP DRAW
					WIRE	Dual Element
VOLTAGE		SERVICE					BREAKER
			60 Hz	50 Hz	SIZE*	Time Delay
208	3Ø	3/4	54	---	4	80	90
230	3Ø	3	48	---	4	80	90
380	3Ø	3/4	---	29	10	40	60
416	3Ø	3/4	---	27	10	40	60
460	3Ø	3/4	25	---	10	40	60

* AWG Stranded Type Wire...for individual lengths less than 100 feet (30.48 meters).

WARNING: 208 VAC and 230 VAC ARE NOT THE SAME. Any damage done to dryer components due to improper voltage connections will automatically VOID THE WARRANTY.

IMPORTANT: The dryer must be connected to the electrical supply shown on the data label that

is affixed to the back of the dryer, at the upper right hand corner. In case of 208 VAC or 230 VAC, the supply voltage must match the electric service specifications of the data label exactly.

NOTE: ADC RESERVES THE RIGHT TO MAKE CHANGES IN SPECIFICATIONS AT ANY TIME, WITHOUT NOTICE or OBLIGATION.

19