6.Lint drawer/screen is not being cleaned on a regular basis or often enough.
7.Extractors (washers) are not performing properly.
8.Sail switch is fluttering...restriction in exhaust... for GAS MODELS ONLY.
9.Failed microprocessor controller (computer)...temperature calibration is inaccurate.
10. Failed microprocessor temperature sensor...calibration is inaccurate.
11.Steam damper system is not functioning properly ... for STEAM MODELS ONLY...
a.Steam damper sticking closed.
b.Leak in pneumatic system.
Y.Excessive noise and/or vibration...
1.Dryer is not leveled properly.
2.Impellor (fan) out of balance ...
a.Excessive lint build up on impellor (fan)...check air jet.
b.Failed impellor (fan).
3.Loose motor mount.
4.Failed idler bearings and/or tumbler bearings.
5.
6.Tumbler (basket) drive wheels are worn or loose.
7.Set screws of the tumbler drive shaft bearings are too loose.
8.Failed motor bearings.
9.Drive wheel trantorque is too loose.
Z.Scrapping or rubbing noise in tumbler (basket) area or around front or rear panels...
1.Check for object(s) caught somewhere in tumbler (basket).
2.Misadjusted thrust wheel(s).
3.Failed thrust wheel(s).
49