7.0 cu ft DRYER (STYLE 1) INSTRUCTIONS (GREEN KIT)
• GREEN KIT • GREEN KIT • GREEN KIT • GREEN KIT • GREEN KIT •
C2) Attaching dryer (style 1) mounting hardware
1.Use the following instructions for mounting any of these types of dryers to the pedestal:
Dryer cabinet (style 1) with 3 indents on side.
2.Attach each front clip to
NO spacers under front brackets.
3.Insert “A” tab of each rear bracket into the rear slots on rear of pedestal using rear bracket spacers. Orient bracket inward for “style 1” dryer mounting.
“A” | inward | |
tab | ||
|
rear 
slot
4.Install 2 screws through each rear bracket into aligning pedestal holes.
D2) Mounting dryer (style 1)
- EXCESSIVE WEIGHT HAZARD - To avoid back or other injury, have more than one person move or lift the dryer.
1.Using two or more persons, slightly tip the dryer back and lift it onto the pedestal. Still tipped, slide the dryer back against the rear brackets and gently set down the front so the appliance is between the front and rear brackets.
SLIDE BACK
TIP DOWN
2.Adjust the appliance
3.Install 2 screws through each rear bracket into the base of the dryer.
4.Install a screw through each front bracket into the base of the dryer.
E2) Installing or re-installing dryer (style 1)
1.Slide appliance/pedestal into place.
2.Check for levelness and rock all four (4) legs again. Repeat until level and solid.
3.Refer to Dryer Installation Instructions for complete details on installing electrical, gas, or exhaust venting.
4