Dakota Digital MMX-6 operation manual Back light, Using The Back Light, Scan Mode

Page 27

MMX-6 DL Ultrasonic Thickness Gauge

The Back light

The back light of the MMX-6 DL can be set to three different positions on/off/auto. The following steps outline the procedure for changing the settings of the back light:

Using The Back Light

1)Press ON/OFF key to power up the MMX-6 DL.

2)Press the MODE key to activate features and settings.

3)Press the UP / Down arrow keys to scroll to the LItE symbol.

4)Press the SEND key to toggle the status of the back light on/off/auto.

5)Press the MODE key once again to return to measurement mode.

Scan Mode

While the MMX-6 DL excels at making single point measurements, it is sometimes desirable to examine a larger region, searching for the thinnest point. The MMX-6 DL includes a feature, called Scan Mode, which allows it to do just that.

In normal operation, the MMX-6 DL performs and displays four measurements every second, which is quite adequate for single measurements. In Scan Mode, however, the tool performs sixteen

23

Image 27
Contents Dakota Ultrasonics Dakota Ultrasonics Contents Disclaimer Very Important Introduction Blank Keypad OperationDakota Ultrasonics MMX-6 DL Ultrasonic Thickness Gauge Dakota Ultrasonics Display Dakota Ultrasonics Is currently operating in echo-echo Thru-paint/coating mode Transducer Making Measurements Dakota Ultrasonics Condition and Preparation of Surfaces Performing a Probe-Zero Probe ZeroCalibration Dakota Ultrasonics Calibration to a known thickness Dakota Ultrasonics Calibration to a known velocity Dakota Ultrasonics Two Point Calibration Units in/mm MMX-6 DL Modes Changing Units in / MMUsing The Back Light Scan ModeBack light Alarm Mode Using Scan ModeUsing the Beeper Dual-Multi Mode RS232 Serial Port & The Data Logger Connecting To a ComputerUsing The Data Logger Using the Data Logger Clearing a Storage Location Clearing an Entire File Sending All Files to a Computer Clearing all FilesPrinting a File Transducer Selection MMX-6 DL Ultrasonic Thickness Gauge Dakota Ultrasonics Blank Keypad Product Specifications PhysicalPower Source Appendix aAppendix B Application Notes Measuring pipe and tubingMeasuring hot surfaces Measuring laminated materials Measuring Through Paint & Coatings Blank Sound Velocities of some Common Materials Appendix CBlank Warranty Statement Warranty Information