Standard Horizon CP500 owner manual Quick Activation by pressing CLR for 1 second

Page 18

- If Auto Switch is chosen, all the menus will be closed and the video input will be shown switching between the Video Input Full View (if connected) and the selected page. See next section for details of setting up the switching times. If the user agrees to proceed, the image from the video input and the GPS Chart Plotter page will be shown intermittently. The intermittence time is selected by Switching Timeout item.

. SWITCHING TIMEOUT, the possible choices are 5,10,30 sec, 1, 5, 10 min. Allows selecting the timing to change from Video Input and GPS Chart Plotter display.

. RESTORE DEFAULTS, allows restoring the factory defaults for the Input picture adjustment. When Restore default is executed, the message “OK” is shown next to the selected menu item.

NOTE

If the video signal is not present on the video connector, the corresponding item in the menu will be shown in gray and will not be selectable.

b)Quick Activation by pressing [CLR] for 1 second

Pressing and holding [CLR] for 1 second from the Chart page Display or from any main page (Navigation, Highway, Celestial, GPS Status, DSC, NMEA DISPLAY); the following Soft Keys are shown: [FULL SCREEN], [PIP VIEW], [AUTO SWITCH]. If no video signal is detected on the Video Input connector, the Soft Keys will be shown in gray and will not be selectable.

c)Quick Activation by Soft Keys

It is possible to assign the Video Input mode to any of the Soft Keys. Press one of the Soft Keys, the Soft Keys functions are shown. Pressing and holding for 1 second one of the Soft Keys, the Soft Keys customization list will be shown. By selecting VIDEO option it will be possible to assign the Soft Key to execute the Video Input function. Once the Soft Key has been assigned to Video Input, its label will show the message [VIDEO].

If [VIDEO] is pressed, the Soft Keys will be assigned this way: [FULL SCREEN], [PIP VIEW], [AUTO SWITCH]. From now on, the functioning is identical to case b).

Page 20

CP500

Page 17 Page 19
Image 18
Page 17 Page 19
Contents CP500 FCC Compliance Statement Cleaning Procedure for the GPS Chart Plotter Screen CP500 Table of Contents User C-CARD RoutesTracks PagesSpecifications Technical TestsAppendix Terms Analitycal Index CP500 Packing List IntroductionGeneral Information Part CodeOptional Accessories Radar Unit Supplied by SI-TEX USA Model Number DescriptionBracket Mounting Mounting the GPS Chart PlotterGetting Started MenuExternal GPS Antenna Mounting Flush mounting the antennaGPS antenna connections Battery ConnectionsGPS cable PWR & ACC 1 CableNmea Connections BOX Fish FinderSelect SEND/REC RTE&MARKS and press ENT Personal Computer Connection / SetupSetting UP the COM Port Send or Receiving RTE and WPLACC 2 Connector VHF ConnectionsVGA Video Output · One VGA output · Two Ntsc or PAL Video InputsQuick Activation by pressing CLR for 1 second Quick Activation by Soft KeysControls and Indicators Controls and ConnectionsAlphanumeric keys Power On, Off and ShuttlePoint knob operation Getting StartedHome mode Cursor Vs. Home ModeCursor Mode Cursor and Menu selection speedChanging the backlight and contrast Selecting North Up or Course UpAdjusting the Time Adjusting TimeChanging the Chart Color Selecting Loran TD or Other Coordinate SystemSelecting Pages with Soft Keys Customizing the Soft KeysDate Format Other Settings in General Setup MenuTime Setup Keypad BeepAbout Using Find Services & More Function Port ServicesOther Available Searches Info on Lakes Quick Info On LakesFull Info On Lakes 1a Example of picture associated to the Fishing object CP500 MAP MAX Overview New Data FeaturesNew Presentation Features Inserting the C-CARDCP500 MAX Functions Menu Fonts & SymbolsMAP Functions Zoom TypePerspective View Dynamic Nav-AidsZoom Currents Prediction Data OffPictures & Diagrams How to show the pictures or diagrams of a Multimedia ObjectEnhanced Port Info Editing a Mark Creating a NEW Mark Using the ChartCreating Marks MarkDeleting a Mark or Waypoint Moving a Mark or WaypointMARKS/WAYPOINTS List CREATING/MODIFY a NEW Mark in the User Points List Goto CursorGoto Cursor Goto Route Goto MarkCP500 MAN Over Board MOB Function Placing a MOB PointDeleting a MOB Point CP500 Creating a Route Using Waypoints RoutesChanging Name to a Route Creating a Route Using Marks on the Chart Making Additional RoutesGoto a Route Other Settings in Route MenuInserting a Waypoint Into a Route By select RouteCP500 Tracks TrackingSaving and starting a new Track Other Settings in Track MenuUsing the Trip LOG ENTResetting the Trip Log CP500 User C-CARD User C-CARD MenuFormatting the User C-CARD Deleting a file from the User C-CARD Transferring files to the optional User C-CARDLoading a file Changing the User C-CARDPages · Selection by Menu· Selection by Soft KEY Chart Additional Functions on ChartWindow Selections Display Mode Turning Off Information on Icon Points12.0.3.2 Land Settings 12.0.3.0 Marine Settings12.0.3.1 Depth Settings 12.0.3.3 Chart SettingsCustomizing the Map Configurations Underwater Object SettingsCustomizing the Data Windows Navigation HighwayChanging date CelestialGPS Status Changing to and from Daylight Savings timeNmea Display Changing the Nmea page WindowsNmea Data Nmea DEPTH, Wind SPEED, Temp and SOG Trend PagesVHF Digital Selective Calling DSC Distress Call Position RequestAdvanced Settings INPUT/OUTPUT Nmea ConnectionNavigate Alarms CompassGrounding Alarm CP500 AIS AIS System DefinitionsTo SET the Chart Plotter for Receiving AIS AIS MenuQuick Info on AIS Target MAP Weather Service MAP Weather Service MenuLoad From File Forecast Real Time ViewType of Data Troubleshooting CP500 System Test RAM Menu resetTechnical Tests DIM MenuInternal Data Base Test Card ConnectorBacklight Card TestSpecifications MAP NT +/MAX C-CARDCP500 Flush Mount cutout Dimensions are in mm GPS Waas Smart Receiver Specifications Physical CharacteristicsCP500 Appendix Terms Page Analitycal Index AltitudeMAX Overview Please Note A N D a R D H O R I Z O N L I M I T E D W a R R a N T Y
Related manuals
Manual 42 pages 55.96 Kb

CP500 specifications

Standard Horizon is well known for its innovative marine electronics, particularly its line of chart plotters and multifunction displays. Among its popular products are the CPV550, CP500, CP180I, CP180, and CP300 models, each designed to enhance navigational experience for boaters and sailors.

The Standard Horizon CPV550 is a cutting-edge chart plotter that features a bright, high-resolution 5.5-inch color display. This model supports Navionics and C-MAP charts, ensuring users have access to high-quality cartography. Its built-in GPS receiver offers exceptional accuracy and fast position fixes, while its user-friendly interface allows for easy navigation through menus and functions. The CPV550 is equipped with a variety of connectivity options, including NMEA 0183, allowing for seamless integration with other onboard electronics.

The CP500 is another robust option, featuring a 5-inch display and advanced GPS technology. This model is designed for ease of use, with a straightforward interface that appeals to both novice and experienced users. It offers real-time tracking and position monitoring, making it ideal for coastal cruising and fishing. The CP500 supports various cartography formats, providing flexibility for users who prefer different map sources.

Moving on, the CP180I model stands out with its innovative integrated design, packing a 7-inch display and multiple advanced features into a compact unit. It includes built-in Wi-Fi, allowing users to connect their mobile devices and access updates or weather information directly from the display. The CP180I is also compatible with a wide range of NMEA 2000 devices, offering greater customization options for boaters looking to expand their electronic setups.

The CP180 offers similar capabilities but focuses on a slightly larger 8-inch screen. This model enhances visibility and provides an intuitive experience with its touch-screen interface. It supports various navigation modes and features such as AIS overlay and radar integration, which significantly improve situational awareness on the water.

Finally, the Standard Horizon CP300 is a versatile chart plotter that combines advanced features with exceptional user-friendliness. This model features a 9-inch display that offers crisp visuals and enhanced readability even in bright sunlight. It also stands out for its robust integration capabilities with other marine instruments. The CP300 includes built-in Bluetooth and Wi-Fi, allowing for wireless data sharing and connectivity with smart devices.

Overall, the Standard Horizon line of chart plotters, including the CPV550, CP500, CP180I, CP180, and CP300, offers advanced technological features, reliable performance, and user-friendly interfaces, making them excellent choices for both leisure and professional mariners alike. With a focus on connectivity, visibility, and customizable options, these devices enhance the navigation experience on the water.
Top Page Image Contents