Standard Horizon CP500 Cursor Vs. Home Mode, Cursor and Menu selection speed, Cursor Mode

Page 22

3.1.1Cursor Vs. Home Mode

Cursor Mode

When the cursor is shown on the Chart page, this is called Cursor mode.

In Cursor mode the position of the vessel will not stay in the center of the page and will move right off the edge of the screen (as your boat moves) Cursor mode allows you to pan around and look at areas on the map. In this mode your can also measure distance and bearings from your current position.

Home mode

When the ships icon is shown on the Chart page (cursor is not shown) you are in Home mode. Now as the ship moves through the water the vessels position will be kept in the center of the display.

NOTE

To change from Cursor mode to Home mode press [CLR].

3.1.2Cursor and Menu selection speed

The GPS Chart Plotter allows you to control the speed the Cursor moves when the ShuttlePoint knob is pressed. To change the speed:

Figure 3.1.2 - Cursor Speed menu

1.Press [MENU]. Move the ShuttlePoint knob to highlight SETUP MENU and press [ENT].

2.Move the ShuttlePoint knob to highlight GENERAL SETUP and press [ENT] or move the ShuttlePoint knob to the right.

3.Move the ShuttlePoint knob to highlight CURSOR SPEED and press [ENT] or move the ShuttlePoint knob to the right.

4.The menu now shows two selections, CHART and MENU which allows the Cursor Speed to be selected to High, Medium or Low on Chart page or within the menus.

5.With CHART or MENU selected, press [ENT] or move the ShuttlePoint knob to the right. Move the ShuttlePoint knob to the desired setting and press [ENT] or move the ShuttlePoint knob to the right.

6.Press [CLR] until the menu disappears or an easier method is to press the ShuttlePoint knob to the left a few times.

7.Move the cursor on the Chart page and see if the speed is to your liking.

3.1.3Changing the Ships Icon

The cursor may be changed to any of the following:

Page 24

CP500

Page 21 Page 23
Image 22
Page 21 Page 23
Contents CP500 FCC Compliance Statement Cleaning Procedure for the GPS Chart Plotter Screen CP500 Table of Contents User C-CARD RoutesTracks PagesTechnical Tests SpecificationsAppendix Terms Analitycal Index CP500 Packing List IntroductionGeneral Information Part CodeOptional Accessories Radar Unit Supplied by SI-TEX USA Model Number DescriptionBracket Mounting Mounting the GPS Chart PlotterGetting Started MenuExternal GPS Antenna Mounting Flush mounting the antennaGPS antenna connections Battery ConnectionsGPS cable PWR & ACC 1 CableNmea Connections BOX Fish FinderSelect SEND/REC RTE&MARKS and press ENT Personal Computer Connection / SetupSetting UP the COM Port Send or Receiving RTE and WPLVHF Connections ACC 2 ConnectorVGA Video Output · One VGA output · Two Ntsc or PAL Video InputsQuick Activation by pressing CLR for 1 second Quick Activation by Soft KeysControls and Indicators Controls and ConnectionsAlphanumeric keys Power On, Off and ShuttlePoint knob operation Getting StartedHome mode Cursor Vs. Home ModeCursor Mode Cursor and Menu selection speedChanging the backlight and contrast Selecting North Up or Course UpAdjusting the Time Adjusting TimeChanging the Chart Color Selecting Loran TD or Other Coordinate SystemSelecting Pages with Soft Keys Customizing the Soft KeysDate Format Other Settings in General Setup MenuTime Setup Keypad BeepAbout Port Services Using Find Services & More FunctionOther Available Searches Quick Info On Lakes Info on LakesFull Info On Lakes 1a Example of picture associated to the Fishing object CP500 MAP MAX Overview New Data FeaturesNew Presentation Features Inserting the C-CARDCP500 MAX Functions Menu Fonts & SymbolsMAP Functions Zoom TypePerspective View Dynamic Nav-AidsZoom Currents Prediction Data OffPictures & Diagrams How to show the pictures or diagrams of a Multimedia ObjectEnhanced Port Info Editing a Mark Creating a NEW Mark Using the ChartCreating Marks MarkDeleting a Mark or Waypoint Moving a Mark or WaypointMARKS/WAYPOINTS List Goto Cursor CREATING/MODIFY a NEW Mark in the User Points ListGoto Cursor Goto Route Goto MarkCP500 Placing a MOB Point MAN Over Board MOB FunctionDeleting a MOB Point CP500 Routes Creating a Route Using WaypointsChanging Name to a Route Creating a Route Using Marks on the Chart Making Additional RoutesGoto a Route Other Settings in Route MenuInserting a Waypoint Into a Route By select RouteCP500 Tracks TrackingSaving and starting a new Track Other Settings in Track MenuUsing the Trip LOG ENTResetting the Trip Log CP500 User C-CARD Menu User C-CARDFormatting the User C-CARD Deleting a file from the User C-CARD Transferring files to the optional User C-CARDLoading a file Changing the User C-CARD· Selection by Menu Pages· Selection by Soft KEY Additional Functions on Chart ChartWindow Selections Display Mode Turning Off Information on Icon Points12.0.3.2 Land Settings 12.0.3.0 Marine Settings12.0.3.1 Depth Settings 12.0.3.3 Chart SettingsUnderwater Object Settings Customizing the Map ConfigurationsCustomizing the Data Windows Navigation HighwayChanging date CelestialGPS Status Changing to and from Daylight Savings timeNmea Display Changing the Nmea page WindowsNmea DEPTH, Wind SPEED, Temp and SOG Trend Pages Nmea DataVHF Digital Selective Calling DSC Distress Call Position RequestINPUT/OUTPUT Nmea Connection Advanced SettingsNavigate Alarms CompassGrounding Alarm CP500 AIS AIS System DefinitionsAIS Menu To SET the Chart Plotter for Receiving AISQuick Info on AIS Target MAP Weather Service Menu MAP Weather ServiceLoad From File Real Time View ForecastType of Data Troubleshooting CP500 System Test RAM Menu resetTechnical Tests DIM MenuInternal Data Base Test Card ConnectorBacklight Card TestSpecifications MAP NT +/MAX C-CARDCP500 Flush Mount cutout Dimensions are in mm GPS Waas Smart Receiver Specifications Physical CharacteristicsCP500 Appendix Terms Page Analitycal Index AltitudeMAX Overview Please Note A N D a R D H O R I Z O N L I M I T E D W a R R a N T Y
Related manuals
Manual 42 pages 55.96 Kb

CP500 specifications

Standard Horizon is well known for its innovative marine electronics, particularly its line of chart plotters and multifunction displays. Among its popular products are the CPV550, CP500, CP180I, CP180, and CP300 models, each designed to enhance navigational experience for boaters and sailors.

The Standard Horizon CPV550 is a cutting-edge chart plotter that features a bright, high-resolution 5.5-inch color display. This model supports Navionics and C-MAP charts, ensuring users have access to high-quality cartography. Its built-in GPS receiver offers exceptional accuracy and fast position fixes, while its user-friendly interface allows for easy navigation through menus and functions. The CPV550 is equipped with a variety of connectivity options, including NMEA 0183, allowing for seamless integration with other onboard electronics.

The CP500 is another robust option, featuring a 5-inch display and advanced GPS technology. This model is designed for ease of use, with a straightforward interface that appeals to both novice and experienced users. It offers real-time tracking and position monitoring, making it ideal for coastal cruising and fishing. The CP500 supports various cartography formats, providing flexibility for users who prefer different map sources.

Moving on, the CP180I model stands out with its innovative integrated design, packing a 7-inch display and multiple advanced features into a compact unit. It includes built-in Wi-Fi, allowing users to connect their mobile devices and access updates or weather information directly from the display. The CP180I is also compatible with a wide range of NMEA 2000 devices, offering greater customization options for boaters looking to expand their electronic setups.

The CP180 offers similar capabilities but focuses on a slightly larger 8-inch screen. This model enhances visibility and provides an intuitive experience with its touch-screen interface. It supports various navigation modes and features such as AIS overlay and radar integration, which significantly improve situational awareness on the water.

Finally, the Standard Horizon CP300 is a versatile chart plotter that combines advanced features with exceptional user-friendliness. This model features a 9-inch display that offers crisp visuals and enhanced readability even in bright sunlight. It also stands out for its robust integration capabilities with other marine instruments. The CP300 includes built-in Bluetooth and Wi-Fi, allowing for wireless data sharing and connectivity with smart devices.

Overall, the Standard Horizon line of chart plotters, including the CPV550, CP500, CP180I, CP180, and CP300, offers advanced technological features, reliable performance, and user-friendly interfaces, making them excellent choices for both leisure and professional mariners alike. With a focus on connectivity, visibility, and customizable options, these devices enhance the navigation experience on the water.
Top Page Image Contents