Standard Horizon CP500 owner manual About

Page 28

SHIP ICON

Allows selection of one of 5 choices of ship icons that represent your vessels position

 

shown on the chart page.

 

CURSOR SPEED

Selects the preferred speed among Low, Medium and High for the cursor in the Chart page

 

and within the menu.

 

MEASURE DISTANCE

When this function is turned on allows

a distance to be measured between two points

 

using the ShuttlePoint knob and [ENT].

 

WINDOWS SETUP

This menu selection allows the data windows to be customized on the Chart and

 

Navigation pages.

 

LANGUAGE

Allows changing the language for menus and data screens.

AUTO INFO

By default when the cursor is moved over a buoy, Mark or other item a popup window will

 

show information of the item. This menu item allows the window to be turned On or Off.

CURSOR WINDOW

By default when the cursor is moved a window is shown with the lat/lon Distance and

 

bearing from the vessels location to the cursor. This selection allows the window to be

 

turned Off.

 

CURSOR POSITION

The position of the cursor (vessels location) can be customized so it centered in the middle

 

or centered on the bottom of the chart page.

COG TIME LINE

Is a line projected from the vessel icon which indicates the distance your vessel will travel

 

at the current speed. Selections are 2, 10, 30 minutes, 1, 2 hours and Infinite.

3.8ABOUT PAGE

From Main Menu page it is possible to select an Information page containing Software, Chart and Optional devices information.

1Software System Information

2Cartography Information

3Storage Capacity

XXXXXXYY.YY

:M-NA-M632.00 LOS ANGELES and SAN PEDRO BAYS

:

1

2

3

Figure 3.8 - Example of About page

1.Press [MENU]. Move the ShuttlePoint knob to highlight SETUP MENU and press [ENT].

2.Move the ShuttlePoint knob to highlight About... and press [ENT] or move the ShuttlePoint knob to the right.

3.The Information page appears on the screen (see the previous Figure).

4.Press [CLR] or move the ShuttlePoint knob to the left to exit and show the Chart page.

Page 30

CP500

Page 27 Page 29
Image 28
Page 27 Page 29
Contents CP500 FCC Compliance Statement Cleaning Procedure for the GPS Chart Plotter Screen CP500 Table of Contents Routes TracksUser C-CARD PagesTechnical Tests SpecificationsAppendix Terms Analitycal Index CP500 Introduction General InformationPacking List Part CodeOptional Accessories Radar Unit Supplied by SI-TEX USA Model Number DescriptionMounting the GPS Chart Plotter Getting StartedBracket Mounting MenuExternal GPS Antenna Mounting Flush mounting the antennaBattery Connections GPS cableGPS antenna connections PWR & ACC 1 CableNmea Connections BOX Fish FinderPersonal Computer Connection / Setup Setting UP the COM PortSelect SEND/REC RTE&MARKS and press ENT Send or Receiving RTE and WPLVHF Connections ACC 2 ConnectorVGA Video Output · One VGA output · Two Ntsc or PAL Video InputsQuick Activation by pressing CLR for 1 second Quick Activation by Soft KeysControls and Indicators Controls and ConnectionsAlphanumeric keys Power On, Off and ShuttlePoint knob operation Getting StartedCursor Vs. Home Mode Cursor ModeHome mode Cursor and Menu selection speedChanging the backlight and contrast Selecting North Up or Course UpAdjusting the Time Adjusting TimeChanging the Chart Color Selecting Loran TD or Other Coordinate SystemSelecting Pages with Soft Keys Customizing the Soft KeysOther Settings in General Setup Menu Time SetupDate Format Keypad BeepAbout Port Services Using Find Services & More FunctionOther Available Searches Quick Info On Lakes Info on LakesFull Info On Lakes 1a Example of picture associated to the Fishing object CP500 New Data Features New Presentation FeaturesMAP MAX Overview Inserting the C-CARDCP500 Fonts & Symbols MAP FunctionsMAX Functions Menu Zoom TypePerspective View Dynamic Nav-AidsZoom Currents Prediction Data OffPictures & Diagrams How to show the pictures or diagrams of a Multimedia ObjectEnhanced Port Info Creating a NEW Mark Using the Chart Creating MarksEditing a Mark MarkDeleting a Mark or Waypoint Moving a Mark or WaypointMARKS/WAYPOINTS List Goto Cursor CREATING/MODIFY a NEW Mark in the User Points ListGoto Cursor Goto Route Goto MarkCP500 Placing a MOB Point MAN Over Board MOB FunctionDeleting a MOB Point CP500 Routes Creating a Route Using WaypointsChanging Name to a Route Creating a Route Using Marks on the Chart Making Additional RoutesOther Settings in Route Menu Inserting a Waypoint Into a RouteGoto a Route By select RouteCP500 Tracks TrackingOther Settings in Track Menu Using the Trip LOGSaving and starting a new Track ENTResetting the Trip Log CP500 User C-CARD Menu User C-CARDFormatting the User C-CARD Transferring files to the optional User C-CARD Loading a fileDeleting a file from the User C-CARD Changing the User C-CARD· Selection by Menu Pages· Selection by Soft KEY Additional Functions on Chart ChartWindow Selections Display Mode Turning Off Information on Icon Points12.0.3.0 Marine Settings 12.0.3.1 Depth Settings12.0.3.2 Land Settings 12.0.3.3 Chart SettingsUnderwater Object Settings Customizing the Map ConfigurationsCustomizing the Data Windows Navigation HighwayCelestial GPS StatusChanging date Changing to and from Daylight Savings timeNmea Display Changing the Nmea page WindowsNmea DEPTH, Wind SPEED, Temp and SOG Trend Pages Nmea DataVHF Digital Selective Calling DSC Distress Call Position RequestINPUT/OUTPUT Nmea Connection Advanced SettingsNavigate Alarms CompassGrounding Alarm CP500 AIS AIS System DefinitionsAIS Menu To SET the Chart Plotter for Receiving AISQuick Info on AIS Target MAP Weather Service Menu MAP Weather ServiceLoad From File Real Time View ForecastType of Data Troubleshooting CP500 RAM Menu reset Technical TestsSystem Test DIM MenuCard Connector BacklightInternal Data Base Test Card TestSpecifications MAP NT +/MAX C-CARDCP500 Flush Mount cutout Dimensions are in mm GPS Waas Smart Receiver Specifications Physical CharacteristicsCP500 Appendix Terms Page Analitycal Index AltitudeMAX Overview Please Note A N D a R D H O R I Z O N L I M I T E D W a R R a N T Y
Related manuals
Manual 42 pages 55.96 Kb

CP500 specifications

Standard Horizon is well known for its innovative marine electronics, particularly its line of chart plotters and multifunction displays. Among its popular products are the CPV550, CP500, CP180I, CP180, and CP300 models, each designed to enhance navigational experience for boaters and sailors.

The Standard Horizon CPV550 is a cutting-edge chart plotter that features a bright, high-resolution 5.5-inch color display. This model supports Navionics and C-MAP charts, ensuring users have access to high-quality cartography. Its built-in GPS receiver offers exceptional accuracy and fast position fixes, while its user-friendly interface allows for easy navigation through menus and functions. The CPV550 is equipped with a variety of connectivity options, including NMEA 0183, allowing for seamless integration with other onboard electronics.

The CP500 is another robust option, featuring a 5-inch display and advanced GPS technology. This model is designed for ease of use, with a straightforward interface that appeals to both novice and experienced users. It offers real-time tracking and position monitoring, making it ideal for coastal cruising and fishing. The CP500 supports various cartography formats, providing flexibility for users who prefer different map sources.

Moving on, the CP180I model stands out with its innovative integrated design, packing a 7-inch display and multiple advanced features into a compact unit. It includes built-in Wi-Fi, allowing users to connect their mobile devices and access updates or weather information directly from the display. The CP180I is also compatible with a wide range of NMEA 2000 devices, offering greater customization options for boaters looking to expand their electronic setups.

The CP180 offers similar capabilities but focuses on a slightly larger 8-inch screen. This model enhances visibility and provides an intuitive experience with its touch-screen interface. It supports various navigation modes and features such as AIS overlay and radar integration, which significantly improve situational awareness on the water.

Finally, the Standard Horizon CP300 is a versatile chart plotter that combines advanced features with exceptional user-friendliness. This model features a 9-inch display that offers crisp visuals and enhanced readability even in bright sunlight. It also stands out for its robust integration capabilities with other marine instruments. The CP300 includes built-in Bluetooth and Wi-Fi, allowing for wireless data sharing and connectivity with smart devices.

Overall, the Standard Horizon line of chart plotters, including the CPV550, CP500, CP180I, CP180, and CP300, offers advanced technological features, reliable performance, and user-friendly interfaces, making them excellent choices for both leisure and professional mariners alike. With a focus on connectivity, visibility, and customizable options, these devices enhance the navigation experience on the water.
Top Page Image Contents