Standard Horizon CP500 owner manual Controls and Indicators, Controls and Connections

Page 19

3.CONTROLS AND INDICATORS

3.0CONTROLS AND CONNECTIONS

Using the keys located on the front panel controls the CP500. These labelled keys are dedicated to specific functions. As you press a key, a single audio beep confirms the key action; every time a key press is not valid, three rapid beeps sound to indicate that the key action is not valid. There is also a ShuttlePoint knob to move the cursor across the screen.

The ZOOM IN and ZOOM OUT keys

a. Pressing [ZOOM IN] shows more detail of a smaller area, by changing the chart scale and zooming in on your display.

b. Press [ZOOM OUT] to change the scale and show a wider, otherwise less detailed view. c. Pressing and holding [ZOOM IN]/[ZOOM OUT] allows for quick zoom, that is the fast

change of the chart scale where only the land areas are drawn.

d. When [ZOOM IN]/[ZOOM OUT] is released all map details are shown.

NOTE

The GPS Chart Plotter contains a Worldwide background that allows you to zoom into 2NM. For more detail, a C-MAP NT+/MAX C-CARD must be purchased and installed.

The ShuttlePoint knob

a. The ShuttlePoint knob moves the cursor about on the display screen, quickly and accurately.

b. It also scrolls the desired option in the menu page(s). It changes the Chart Plotter from Home Mode to Cursor Mode on the Chart Screen.

c. For a detailed explanation of Cursor VS Home mode refer to Par. 3.1.1.

The ENT key

Press [ENT] to select the desired option or to confirm selection.

The CLR key

a. Press [CLR] to set Home mode.

b. Press [CLR] to exit from menu or data windows or to leave a menu without making changes, to abort selected function or to step backward from a selection made in the menu.

The MENU key

a. Selects the Main Menu.

b. When in the Setup Menu mode, moving the ShuttlePoint knob to the right enters a selection, moving the knob to the left clears the function.

c. Press and hold [MENU] for 3 seconds allows you to change the fields contained within the data windows while on the Chart, Navigation, Highway, GPS Status or NMEA Display Page.

d. Press and hold [MENU] for 3 seconds from Navigation, Highway, GPS Status, NMEA and Chart pages allows the data fields to be customize.

The GOTO key

 

a. This key is very useful when you desire to start navigating (goto) to a destination point.

b. When pressed, a popup window will be shown allowing you to select to start navigating

to the position of the cursor, Mark or Route.

 

c. To stop navigation to a point, press [GO TO] and select Stop on the pop-up window.

CP500

Page 21

Page 18 Page 20
Image 19
Page 18 Page 20
Contents CP500 FCC Compliance Statement Cleaning Procedure for the GPS Chart Plotter Screen CP500 Table of Contents Pages RoutesTracks User C-CARDTechnical Tests SpecificationsAppendix Terms Analitycal Index CP500 Part Code IntroductionGeneral Information Packing ListModel Number Description Optional Accessories Radar Unit Supplied by SI-TEX USAMenu Mounting the GPS Chart PlotterGetting Started Bracket MountingFlush mounting the antenna External GPS Antenna MountingPWR & ACC 1 Cable Battery ConnectionsGPS cable GPS antenna connectionsBOX Fish Finder Nmea ConnectionsSend or Receiving RTE and WPL Personal Computer Connection / SetupSetting UP the COM Port Select SEND/REC RTE&MARKS and press ENTVHF Connections ACC 2 ConnectorVGA Video Output · Two Ntsc or PAL Video Inputs · One VGA outputQuick Activation by Soft Keys Quick Activation by pressing CLR for 1 secondControls and Connections Controls and IndicatorsAlphanumeric keys Getting Started Power On, Off and ShuttlePoint knob operationCursor and Menu selection speed Cursor Vs. Home ModeCursor Mode Home modeSelecting North Up or Course Up Changing the backlight and contrastAdjusting Time Adjusting the TimeSelecting Loran TD or Other Coordinate System Changing the Chart ColorCustomizing the Soft Keys Selecting Pages with Soft KeysKeypad Beep Other Settings in General Setup MenuTime Setup Date FormatAbout Port Services Using Find Services & More FunctionOther Available Searches Quick Info On Lakes Info on LakesFull Info On Lakes 1a Example of picture associated to the Fishing object CP500 Inserting the C-CARD New Data FeaturesNew Presentation Features MAP MAX OverviewCP500 Zoom Type Fonts & SymbolsMAP Functions MAX Functions MenuDynamic Nav-Aids Perspective ViewZoom Data Off Currents PredictionHow to show the pictures or diagrams of a Multimedia Object Pictures & DiagramsEnhanced Port Info Mark Creating a NEW Mark Using the ChartCreating Marks Editing a MarkMoving a Mark or Waypoint Deleting a Mark or WaypointMARKS/WAYPOINTS List Goto Cursor CREATING/MODIFY a NEW Mark in the User Points ListGoto Cursor Goto Mark Goto RouteCP500 Placing a MOB Point MAN Over Board MOB FunctionDeleting a MOB Point CP500 Routes Creating a Route Using WaypointsChanging Name to a Route Making Additional Routes Creating a Route Using Marks on the ChartBy select Route Other Settings in Route MenuInserting a Waypoint Into a Route Goto a RouteCP500 Tracking TracksENT Other Settings in Track MenuUsing the Trip LOG Saving and starting a new TrackResetting the Trip Log CP500 User C-CARD Menu User C-CARDFormatting the User C-CARD Changing the User C-CARD Transferring files to the optional User C-CARDLoading a file Deleting a file from the User C-CARD· Selection by Menu Pages· Selection by Soft KEY Additional Functions on Chart ChartWindow Selections Turning Off Information on Icon Points Display Mode12.0.3.3 Chart Settings 12.0.3.0 Marine Settings12.0.3.1 Depth Settings 12.0.3.2 Land SettingsUnderwater Object Settings Customizing the Map ConfigurationsCustomizing the Data Windows Highway NavigationChanging to and from Daylight Savings time CelestialGPS Status Changing dateChanging the Nmea page Windows Nmea DisplayNmea DEPTH, Wind SPEED, Temp and SOG Trend Pages Nmea DataVHF Digital Selective Calling Position Request DSC Distress CallINPUT/OUTPUT Nmea Connection Advanced SettingsNavigate Compass AlarmsGrounding Alarm CP500 AIS System Definitions AISAIS Menu To SET the Chart Plotter for Receiving AISQuick Info on AIS Target MAP Weather Service Menu MAP Weather ServiceLoad From File Real Time View ForecastType of Data Troubleshooting CP500 DIM Menu RAM Menu resetTechnical Tests System TestCard Test Card ConnectorBacklight Internal Data Base TestMAP NT +/MAX C-CARD SpecificationsCP500 Flush Mount cutout Dimensions are in mm Physical Characteristics GPS Waas Smart Receiver SpecificationsCP500 Appendix Terms Page Altitude Analitycal IndexMAX Overview A N D a R D H O R I Z O N L I M I T E D W a R R a N T Y Please Note
Related manuals
Manual 42 pages 55.96 Kb

CP500 specifications

Standard Horizon is well known for its innovative marine electronics, particularly its line of chart plotters and multifunction displays. Among its popular products are the CPV550, CP500, CP180I, CP180, and CP300 models, each designed to enhance navigational experience for boaters and sailors.

The Standard Horizon CPV550 is a cutting-edge chart plotter that features a bright, high-resolution 5.5-inch color display. This model supports Navionics and C-MAP charts, ensuring users have access to high-quality cartography. Its built-in GPS receiver offers exceptional accuracy and fast position fixes, while its user-friendly interface allows for easy navigation through menus and functions. The CPV550 is equipped with a variety of connectivity options, including NMEA 0183, allowing for seamless integration with other onboard electronics.

The CP500 is another robust option, featuring a 5-inch display and advanced GPS technology. This model is designed for ease of use, with a straightforward interface that appeals to both novice and experienced users. It offers real-time tracking and position monitoring, making it ideal for coastal cruising and fishing. The CP500 supports various cartography formats, providing flexibility for users who prefer different map sources.

Moving on, the CP180I model stands out with its innovative integrated design, packing a 7-inch display and multiple advanced features into a compact unit. It includes built-in Wi-Fi, allowing users to connect their mobile devices and access updates or weather information directly from the display. The CP180I is also compatible with a wide range of NMEA 2000 devices, offering greater customization options for boaters looking to expand their electronic setups.

The CP180 offers similar capabilities but focuses on a slightly larger 8-inch screen. This model enhances visibility and provides an intuitive experience with its touch-screen interface. It supports various navigation modes and features such as AIS overlay and radar integration, which significantly improve situational awareness on the water.

Finally, the Standard Horizon CP300 is a versatile chart plotter that combines advanced features with exceptional user-friendliness. This model features a 9-inch display that offers crisp visuals and enhanced readability even in bright sunlight. It also stands out for its robust integration capabilities with other marine instruments. The CP300 includes built-in Bluetooth and Wi-Fi, allowing for wireless data sharing and connectivity with smart devices.

Overall, the Standard Horizon line of chart plotters, including the CPV550, CP500, CP180I, CP180, and CP300, offers advanced technological features, reliable performance, and user-friendly interfaces, making them excellent choices for both leisure and professional mariners alike. With a focus on connectivity, visibility, and customizable options, these devices enhance the navigation experience on the water.
Top Page Image Contents