Standard Horizon CP500 owner manual MAP Functions, MAX Functions Menu, Zoom Type, Fonts & Symbols

Page 35

6.MAP FUNCTIONS

6.0MAX FUNCTIONS MENU

1.Press [MENU]. Move the ShuttlePoint knob to highlight SETUP MENU and press [ENT].

2.Move the ShuttlePoint knob to highlight MAX FUNCTIONS and press [ENT] or move the ShuttlePoint knob to the right. The MAX Functions menu appears on the screen:

Figure 6.0 - Max Function Menu

The available Functions are described in the following.

6.0.0Zoom Type

Allows zooming into our out on the chart page. Zoom Mode has two options; STANDARD (default) or FLEXI-ZOOM. When in FLEXI-ZOOM mode, a short [ZOOM...] push causes a change of chart, while a long [ZOOM...] push (press and hold) causes a pop-up window to be displayed on a corner of the screen. The window shows the current Zoom Factor. By pressing [ZOOM IN]/[ZOOM OUT] the map is expanded or compressed according to the zoom factor selected. The window is automatically closed if [ZOOM...] is not pressed for 2 seconds and the selected zoom factor will be used at the next zoom in/out.

To activate this function follow the procedure:

1. Press [MENU]. Move the ShuttlePoint knob to highlight SETUP MENU and press [ENT].

2. Move the ShuttlePoint knob to highlight MAX FUNCTIONS and press [ENT] or move the ShuttlePoint knob to the right.

3. Move the ShuttlePoint knob to highlight ZOOM TYPE and press [ENT] or move the ShuttlePoint knob to the right.

4. The menu now shows two selections, STANDARD or FLEXI-ZOOM.

5. Move the ShuttlePoint knob to select the selection and press [ENT].

6. Press [CLR] until the menu disappears or an easier method is to move the ShuttlePoint knob to the left a few times.

6.0.1Fonts & Symbols

On MAX charts it is possible to set the size of all names and symbols drawn on the charts, selecting between Normal size (the regular characters size) and Large size.

To activate this function follow the procedure:

1. Press [MENU]. Move the ShuttlePoint knob to highlight SETUP MENU and press [ENT].

2. Move the ShuttlePoint knob to highlight MAX FUNCTIONS and press [ENT] or move the ShuttlePoint knob to the right.

3. Move the ShuttlePoint knob to highlight FONTS & SYMBOLS and press [ENT] or move the ShuttlePoint knob to the right.

CP500

Page 37

Page 34 Page 36
Image 35
Page 34 Page 36
Contents CP500 FCC Compliance Statement Cleaning Procedure for the GPS Chart Plotter Screen CP500 Table of Contents Pages RoutesTracks User C-CARDAppendix Terms Analitycal Index SpecificationsTechnical Tests CP500 Part Code IntroductionGeneral Information Packing ListModel Number Description Optional Accessories Radar Unit Supplied by SI-TEX USAMenu Mounting the GPS Chart PlotterGetting Started Bracket MountingFlush mounting the antenna External GPS Antenna MountingPWR & ACC 1 Cable Battery ConnectionsGPS cable GPS antenna connectionsBOX Fish Finder Nmea ConnectionsSend or Receiving RTE and WPL Personal Computer Connection / SetupSetting UP the COM Port Select SEND/REC RTE&MARKS and press ENTVGA Video Output ACC 2 ConnectorVHF Connections · Two Ntsc or PAL Video Inputs · One VGA outputQuick Activation by Soft Keys Quick Activation by pressing CLR for 1 secondControls and Connections Controls and IndicatorsAlphanumeric keys Getting Started Power On, Off and ShuttlePoint knob operationCursor and Menu selection speed Cursor Vs. Home ModeCursor Mode Home modeSelecting North Up or Course Up Changing the backlight and contrastAdjusting Time Adjusting the TimeSelecting Loran TD or Other Coordinate System Changing the Chart ColorCustomizing the Soft Keys Selecting Pages with Soft KeysKeypad Beep Other Settings in General Setup MenuTime Setup Date FormatAbout Other Available Searches Using Find Services & More FunctionPort Services Full Info On Lakes Info on LakesQuick Info On Lakes 1a Example of picture associated to the Fishing object CP500 Inserting the C-CARD New Data FeaturesNew Presentation Features MAP MAX OverviewCP500 Zoom Type Fonts & SymbolsMAP Functions MAX Functions MenuDynamic Nav-Aids Perspective ViewZoom Data Off Currents PredictionHow to show the pictures or diagrams of a Multimedia Object Pictures & DiagramsEnhanced Port Info Mark Creating a NEW Mark Using the ChartCreating Marks Editing a MarkMoving a Mark or Waypoint Deleting a Mark or WaypointMARKS/WAYPOINTS List Goto Cursor CREATING/MODIFY a NEW Mark in the User Points ListGoto Cursor Goto Mark Goto RouteCP500 Deleting a MOB Point MAN Over Board MOB FunctionPlacing a MOB Point CP500 Changing Name to a Route Creating a Route Using WaypointsRoutes Making Additional Routes Creating a Route Using Marks on the ChartBy select Route Other Settings in Route MenuInserting a Waypoint Into a Route Goto a RouteCP500 Tracking TracksENT Other Settings in Track MenuUsing the Trip LOG Saving and starting a new TrackResetting the Trip Log CP500 Formatting the User C-CARD User C-CARDUser C-CARD Menu Changing the User C-CARD Transferring files to the optional User C-CARDLoading a file Deleting a file from the User C-CARD· Selection by Soft KEY Pages· Selection by Menu Window Selections ChartAdditional Functions on Chart Turning Off Information on Icon Points Display Mode12.0.3.3 Chart Settings 12.0.3.0 Marine Settings12.0.3.1 Depth Settings 12.0.3.2 Land SettingsCustomizing the Data Windows Customizing the Map ConfigurationsUnderwater Object Settings Highway NavigationChanging to and from Daylight Savings time CelestialGPS Status Changing dateChanging the Nmea page Windows Nmea DisplayVHF Digital Selective Calling Nmea DataNmea DEPTH, Wind SPEED, Temp and SOG Trend Pages Position Request DSC Distress CallNavigate Advanced SettingsINPUT/OUTPUT Nmea Connection Compass AlarmsGrounding Alarm CP500 AIS System Definitions AISQuick Info on AIS Target To SET the Chart Plotter for Receiving AISAIS Menu Load From File MAP Weather ServiceMAP Weather Service Menu Type of Data ForecastReal Time View Troubleshooting CP500 DIM Menu RAM Menu resetTechnical Tests System TestCard Test Card ConnectorBacklight Internal Data Base TestMAP NT +/MAX C-CARD SpecificationsCP500 Flush Mount cutout Dimensions are in mm Physical Characteristics GPS Waas Smart Receiver SpecificationsCP500 Appendix Terms Page Altitude Analitycal IndexMAX Overview A N D a R D H O R I Z O N L I M I T E D W a R R a N T Y Please Note
Related manuals
Manual 42 pages 55.96 Kb

CP500 specifications

Standard Horizon is well known for its innovative marine electronics, particularly its line of chart plotters and multifunction displays. Among its popular products are the CPV550, CP500, CP180I, CP180, and CP300 models, each designed to enhance navigational experience for boaters and sailors.

The Standard Horizon CPV550 is a cutting-edge chart plotter that features a bright, high-resolution 5.5-inch color display. This model supports Navionics and C-MAP charts, ensuring users have access to high-quality cartography. Its built-in GPS receiver offers exceptional accuracy and fast position fixes, while its user-friendly interface allows for easy navigation through menus and functions. The CPV550 is equipped with a variety of connectivity options, including NMEA 0183, allowing for seamless integration with other onboard electronics.

The CP500 is another robust option, featuring a 5-inch display and advanced GPS technology. This model is designed for ease of use, with a straightforward interface that appeals to both novice and experienced users. It offers real-time tracking and position monitoring, making it ideal for coastal cruising and fishing. The CP500 supports various cartography formats, providing flexibility for users who prefer different map sources.

Moving on, the CP180I model stands out with its innovative integrated design, packing a 7-inch display and multiple advanced features into a compact unit. It includes built-in Wi-Fi, allowing users to connect their mobile devices and access updates or weather information directly from the display. The CP180I is also compatible with a wide range of NMEA 2000 devices, offering greater customization options for boaters looking to expand their electronic setups.

The CP180 offers similar capabilities but focuses on a slightly larger 8-inch screen. This model enhances visibility and provides an intuitive experience with its touch-screen interface. It supports various navigation modes and features such as AIS overlay and radar integration, which significantly improve situational awareness on the water.

Finally, the Standard Horizon CP300 is a versatile chart plotter that combines advanced features with exceptional user-friendliness. This model features a 9-inch display that offers crisp visuals and enhanced readability even in bright sunlight. It also stands out for its robust integration capabilities with other marine instruments. The CP300 includes built-in Bluetooth and Wi-Fi, allowing for wireless data sharing and connectivity with smart devices.

Overall, the Standard Horizon line of chart plotters, including the CPV550, CP500, CP180I, CP180, and CP300, offers advanced technological features, reliable performance, and user-friendly interfaces, making them excellent choices for both leisure and professional mariners alike. With a focus on connectivity, visibility, and customizable options, these devices enhance the navigation experience on the water.
Top Page Image Contents