Standard Horizon CP500 owner manual

Page 86

Position Request – Marine DSC VHF Function of transmitting a GPS position to another Marine DSC VHF. When GPS Chart Plotter is connected to STANDARD HORIZON GPS the position of another vessel is shown on the Chart page.

SPEED – Shows the Speed Thru the Water when a Digital Speed Log is connected. SOG (Speed Over Ground) – The speed you vessel is travelling at.

STEER – Heading to steer to destination Waypoint. TIME – Shows the current time received by the GPS.

TRIP LOG – Shows the distance the vessel has travelled since the trip log was reset. TRU Wind DIR SPD (Apparent Wind Direction) – Shows the True Wind Direction when a external wind instrument with NMEA is connected.

TRU Wind SPD (Apparent Wind Speed) – Shows the True Wind Speed when a external wind instrument with NMEA is connected.

TTG (Time To Go) – Shows time to go to reach a Destination point. UNITS Nm Nautical Mile (1 NM = 1.15 Sm or 1.85Km)

Sm Statue Mile (1Sm = 0.87Nm or 1.61Km)

Km Kilometer (1 Kilometer = 0062 Sm or 0.54Nm)

FT Feet. (1 Foot = 0.167 Fathoms or 0.305 Meters)

FA Fathom (1 Fathom = 6 Feet or 1.83 Meters)

Mt Meter (1 Meter = 3.28 Feet or 0.55 Fathoms)

Kts Knot (1 Knot = 1.15 MPH or 1.85 KPH)

MPH Miles Per Hour (1 MPH = 0.87 Knots or 1.61 KPH)

Kmh Kilometer Per Hour (1 KPH = 0.54 Knots or 0.62 MPH)

VMG – It is the destination closing Velocity. The VMG is calculated using the current speed of the vessel (SOG) and the difference between the current vessel course and the bearing to the Destination.

WAAS 2D/3D – The GPS is receiving a 2D or 3D position and the correction from the WAAS Satellite. WAAS consists of approximately 25 ground reference stations positioned across the United States that monitor GPS satellite data. Two master stations, located on either coast, collect data from the reference stations and create a GPS correction message. This correction accounts for GPS satellite orbit and clock drift plus signal delays caused by the atmosphere and ionosphere. The corrected differential message is then broadcast through one of two gestational satellites, or satellites with a fixed position over the equator. The information is compatible with the basic GPS signal structure, which means any WAAS- enabled GPS receiver can read the signal.

WATER TEMP – Shows the sea water temperature when the FF520 50/200kHz BLACK BOX FISH FINDER or a Digital Speed Log/Temp instrument with NMEA is connected.

XTE (Cross Track Error) – The distance your vessel is off course (left or right) to a Destination point.

Page 88

CP500

Page 85 Page 87
Image 86
Page 85 Page 87
Contents CP500 FCC Compliance Statement Cleaning Procedure for the GPS Chart Plotter Screen CP500 Table of Contents User C-CARD RoutesTracks PagesAppendix Terms Analitycal Index SpecificationsTechnical Tests CP500 Packing List IntroductionGeneral Information Part CodeOptional Accessories Radar Unit Supplied by SI-TEX USA Model Number DescriptionBracket Mounting Mounting the GPS Chart PlotterGetting Started MenuExternal GPS Antenna Mounting Flush mounting the antennaGPS antenna connections Battery ConnectionsGPS cable PWR & ACC 1 CableNmea Connections BOX Fish FinderSelect SEND/REC RTE&MARKS and press ENT Personal Computer Connection / SetupSetting UP the COM Port Send or Receiving RTE and WPLVGA Video Output ACC 2 ConnectorVHF Connections · One VGA output · Two Ntsc or PAL Video InputsQuick Activation by pressing CLR for 1 second Quick Activation by Soft KeysControls and Indicators Controls and ConnectionsAlphanumeric keys Power On, Off and ShuttlePoint knob operation Getting StartedHome mode Cursor Vs. Home ModeCursor Mode Cursor and Menu selection speedChanging the backlight and contrast Selecting North Up or Course UpAdjusting the Time Adjusting TimeChanging the Chart Color Selecting Loran TD or Other Coordinate SystemSelecting Pages with Soft Keys Customizing the Soft KeysDate Format Other Settings in General Setup MenuTime Setup Keypad BeepAbout Other Available Searches Using Find Services & More FunctionPort Services Full Info On Lakes Info on LakesQuick Info On Lakes 1a Example of picture associated to the Fishing object CP500 MAP MAX Overview New Data FeaturesNew Presentation Features Inserting the C-CARDCP500 MAX Functions Menu Fonts & SymbolsMAP Functions Zoom TypePerspective View Dynamic Nav-AidsZoom Currents Prediction Data OffPictures & Diagrams How to show the pictures or diagrams of a Multimedia ObjectEnhanced Port Info Editing a Mark Creating a NEW Mark Using the ChartCreating Marks MarkDeleting a Mark or Waypoint Moving a Mark or WaypointMARKS/WAYPOINTS List Goto Cursor CREATING/MODIFY a NEW Mark in the User Points ListGoto Cursor Goto Route Goto MarkCP500 Deleting a MOB Point MAN Over Board MOB FunctionPlacing a MOB Point CP500 Changing Name to a Route Creating a Route Using WaypointsRoutes Creating a Route Using Marks on the Chart Making Additional RoutesGoto a Route Other Settings in Route MenuInserting a Waypoint Into a Route By select RouteCP500 Tracks TrackingSaving and starting a new Track Other Settings in Track MenuUsing the Trip LOG ENTResetting the Trip Log CP500 Formatting the User C-CARD User C-CARDUser C-CARD Menu Deleting a file from the User C-CARD Transferring files to the optional User C-CARDLoading a file Changing the User C-CARD· Selection by Soft KEY Pages· Selection by Menu Window Selections ChartAdditional Functions on Chart Display Mode Turning Off Information on Icon Points12.0.3.2 Land Settings 12.0.3.0 Marine Settings12.0.3.1 Depth Settings 12.0.3.3 Chart SettingsCustomizing the Data Windows Customizing the Map ConfigurationsUnderwater Object Settings Navigation HighwayChanging date CelestialGPS Status Changing to and from Daylight Savings timeNmea Display Changing the Nmea page WindowsVHF Digital Selective Calling Nmea DataNmea DEPTH, Wind SPEED, Temp and SOG Trend Pages DSC Distress Call Position RequestNavigate Advanced SettingsINPUT/OUTPUT Nmea Connection Alarms CompassGrounding Alarm CP500 AIS AIS System DefinitionsQuick Info on AIS Target To SET the Chart Plotter for Receiving AISAIS Menu Load From File MAP Weather ServiceMAP Weather Service Menu Type of Data ForecastReal Time View Troubleshooting CP500 System Test RAM Menu resetTechnical Tests DIM MenuInternal Data Base Test Card ConnectorBacklight Card TestSpecifications MAP NT +/MAX C-CARDCP500 Flush Mount cutout Dimensions are in mm GPS Waas Smart Receiver Specifications Physical CharacteristicsCP500 Appendix Terms Page Analitycal Index AltitudeMAX Overview Please Note A N D a R D H O R I Z O N L I M I T E D W a R R a N T Y
Related manuals
Manual 42 pages 55.96 Kb

CP500 specifications

Standard Horizon is well known for its innovative marine electronics, particularly its line of chart plotters and multifunction displays. Among its popular products are the CPV550, CP500, CP180I, CP180, and CP300 models, each designed to enhance navigational experience for boaters and sailors.

The Standard Horizon CPV550 is a cutting-edge chart plotter that features a bright, high-resolution 5.5-inch color display. This model supports Navionics and C-MAP charts, ensuring users have access to high-quality cartography. Its built-in GPS receiver offers exceptional accuracy and fast position fixes, while its user-friendly interface allows for easy navigation through menus and functions. The CPV550 is equipped with a variety of connectivity options, including NMEA 0183, allowing for seamless integration with other onboard electronics.

The CP500 is another robust option, featuring a 5-inch display and advanced GPS technology. This model is designed for ease of use, with a straightforward interface that appeals to both novice and experienced users. It offers real-time tracking and position monitoring, making it ideal for coastal cruising and fishing. The CP500 supports various cartography formats, providing flexibility for users who prefer different map sources.

Moving on, the CP180I model stands out with its innovative integrated design, packing a 7-inch display and multiple advanced features into a compact unit. It includes built-in Wi-Fi, allowing users to connect their mobile devices and access updates or weather information directly from the display. The CP180I is also compatible with a wide range of NMEA 2000 devices, offering greater customization options for boaters looking to expand their electronic setups.

The CP180 offers similar capabilities but focuses on a slightly larger 8-inch screen. This model enhances visibility and provides an intuitive experience with its touch-screen interface. It supports various navigation modes and features such as AIS overlay and radar integration, which significantly improve situational awareness on the water.

Finally, the Standard Horizon CP300 is a versatile chart plotter that combines advanced features with exceptional user-friendliness. This model features a 9-inch display that offers crisp visuals and enhanced readability even in bright sunlight. It also stands out for its robust integration capabilities with other marine instruments. The CP300 includes built-in Bluetooth and Wi-Fi, allowing for wireless data sharing and connectivity with smart devices.

Overall, the Standard Horizon line of chart plotters, including the CPV550, CP500, CP180I, CP180, and CP300, offers advanced technological features, reliable performance, and user-friendly interfaces, making them excellent choices for both leisure and professional mariners alike. With a focus on connectivity, visibility, and customizable options, these devices enhance the navigation experience on the water.
Top Page Image Contents