Standard Horizon CP500 Selecting Loran TD or Other Coordinate System, Changing the Chart Color

Page 25

2.Move the ShuttlePoint knob to highlight GENERAL SETUP and press [ENT] or move the ShuttlePoint knob to the right.

3.Move the ShuttlePoint knob to highlight TIME SETUP and press [ENT] or move the ShuttlePoint knob to the right.

4.Move the ShuttlePoint knob to highlight GPS TIME OFFSET and press [ENT] or move the ShuttlePoint knob to the right.

5.Move the ShuttlePoint knob down to select +00:00, press [ENT] and move the ShuttlePoint knob to the right to edit the number.

6.Look at the table and find the offset for your area. You will need to enter this offset to make the GPS Chart Plotter shows the correct time.

7.Move the ShuttlePoint knob to the “+”. Move the ShuttlePoint knob up or down to change to the desired offset.

8.Next move the ShuttlePoint knob to the right to select Hours and move the ShuttlePoint knob up or down to change the hour.

9.Repeat this method to change the minutes, if necessary.

10.Once you have the correct GPS time offset, press [ENT] to set.

3.3SELECTING LORAN TD OR OTHER COORDINATE SYSTEM

The GPS Fix coordinates can be changed to show Latitude/Longitude, Loran TD’s or UTM. Below is the window that will appear when customizing the Coordinate System.

Figure 3.3 - Coordinate System menu

1.Press [MENU]. Move the ShuttlePoint knob to highlight SETUP MENU and press [ENT].

2.Move the ShuttlePoint knob to highlight ADVANCED SETUP and press [ENT] or move the ShuttlePoint knob to the right.

3.Move the ShuttlePoint knob to highlight NAVIGATE and press [ENT] or move the ShuttlePoint knob to the right.

4.Move the ShuttlePoint knob to highlight COORDINATE SYSTEM and press [ENT] or move the ShuttlePoint knob to the right.

5.Move the ShuttlePoint knob to highlight the desired coordinate type and press [ENT] or move the ShuttlePoint knob to the right.

6.Press [CLR] or move the ShuttlePoint knob to the left until the Chart page is shown.

NOTE

If the TD is selected, you should set the Chain, Pair, ASF1, ASF2 and Alter. If the TD numbers are not correct the Pair letters may be backwards. Reversing the two letters usually solves this issue. Example Y/Z change to Z/Y.

3.4CHANGING THE CHART COLOR

The GPS Chart Plotter has preprogrammed settings allowing you to customize the look of the Chart page. The default is “Sunlight” however there are other settings; Normal, Classic and Night. Night is very useful during evening hours so not to impair night vision.

CP500

Page 27

Page 24 Page 26
Image 25
Page 24 Page 26
Contents CP500 FCC Compliance Statement Cleaning Procedure for the GPS Chart Plotter Screen CP500 Table of Contents Tracks RoutesUser C-CARD PagesTechnical Tests SpecificationsAppendix Terms Analitycal Index CP500 General Information IntroductionPacking List Part CodeModel Number Description Optional Accessories Radar Unit Supplied by SI-TEX USAGetting Started Mounting the GPS Chart PlotterBracket Mounting MenuFlush mounting the antenna External GPS Antenna MountingGPS cable Battery ConnectionsGPS antenna connections PWR & ACC 1 CableBOX Fish Finder Nmea ConnectionsSetting UP the COM Port Personal Computer Connection / SetupSelect SEND/REC RTE&MARKS and press ENT Send or Receiving RTE and WPLVHF Connections ACC 2 ConnectorVGA Video Output · Two Ntsc or PAL Video Inputs · One VGA outputQuick Activation by Soft Keys Quick Activation by pressing CLR for 1 secondControls and Connections Controls and IndicatorsAlphanumeric keys Getting Started Power On, Off and ShuttlePoint knob operationCursor Mode Cursor Vs. Home ModeHome mode Cursor and Menu selection speedSelecting North Up or Course Up Changing the backlight and contrastAdjusting Time Adjusting the TimeSelecting Loran TD or Other Coordinate System Changing the Chart ColorCustomizing the Soft Keys Selecting Pages with Soft KeysTime Setup Other Settings in General Setup MenuDate Format Keypad BeepAbout Port Services Using Find Services & More FunctionOther Available Searches Quick Info On Lakes Info on LakesFull Info On Lakes 1a Example of picture associated to the Fishing object CP500 New Presentation Features New Data FeaturesMAP MAX Overview Inserting the C-CARDCP500 MAP Functions Fonts & SymbolsMAX Functions Menu Zoom TypeDynamic Nav-Aids Perspective ViewZoom Data Off Currents PredictionHow to show the pictures or diagrams of a Multimedia Object Pictures & DiagramsEnhanced Port Info Creating Marks Creating a NEW Mark Using the ChartEditing a Mark MarkMoving a Mark or Waypoint Deleting a Mark or WaypointMARKS/WAYPOINTS List Goto Cursor CREATING/MODIFY a NEW Mark in the User Points ListGoto Cursor Goto Mark Goto RouteCP500 Placing a MOB Point MAN Over Board MOB FunctionDeleting a MOB Point CP500 Routes Creating a Route Using WaypointsChanging Name to a Route Making Additional Routes Creating a Route Using Marks on the ChartInserting a Waypoint Into a Route Other Settings in Route MenuGoto a Route By select RouteCP500 Tracking TracksUsing the Trip LOG Other Settings in Track MenuSaving and starting a new Track ENTResetting the Trip Log CP500 User C-CARD Menu User C-CARDFormatting the User C-CARD Loading a file Transferring files to the optional User C-CARDDeleting a file from the User C-CARD Changing the User C-CARD· Selection by Menu Pages· Selection by Soft KEY Additional Functions on Chart ChartWindow Selections Turning Off Information on Icon Points Display Mode12.0.3.1 Depth Settings 12.0.3.0 Marine Settings12.0.3.2 Land Settings 12.0.3.3 Chart SettingsUnderwater Object Settings Customizing the Map ConfigurationsCustomizing the Data Windows Highway NavigationGPS Status CelestialChanging date Changing to and from Daylight Savings timeChanging the Nmea page Windows Nmea DisplayNmea DEPTH, Wind SPEED, Temp and SOG Trend Pages Nmea DataVHF Digital Selective Calling Position Request DSC Distress CallINPUT/OUTPUT Nmea Connection Advanced SettingsNavigate Compass AlarmsGrounding Alarm CP500 AIS System Definitions AISAIS Menu To SET the Chart Plotter for Receiving AISQuick Info on AIS Target MAP Weather Service Menu MAP Weather ServiceLoad From File Real Time View ForecastType of Data Troubleshooting CP500 Technical Tests RAM Menu resetSystem Test DIM MenuBacklight Card ConnectorInternal Data Base Test Card TestMAP NT +/MAX C-CARD SpecificationsCP500 Flush Mount cutout Dimensions are in mm Physical Characteristics GPS Waas Smart Receiver SpecificationsCP500 Appendix Terms Page Altitude Analitycal IndexMAX Overview A N D a R D H O R I Z O N L I M I T E D W a R R a N T Y Please Note
Related manuals
Manual 42 pages 55.96 Kb

CP500 specifications

Standard Horizon is well known for its innovative marine electronics, particularly its line of chart plotters and multifunction displays. Among its popular products are the CPV550, CP500, CP180I, CP180, and CP300 models, each designed to enhance navigational experience for boaters and sailors.

The Standard Horizon CPV550 is a cutting-edge chart plotter that features a bright, high-resolution 5.5-inch color display. This model supports Navionics and C-MAP charts, ensuring users have access to high-quality cartography. Its built-in GPS receiver offers exceptional accuracy and fast position fixes, while its user-friendly interface allows for easy navigation through menus and functions. The CPV550 is equipped with a variety of connectivity options, including NMEA 0183, allowing for seamless integration with other onboard electronics.

The CP500 is another robust option, featuring a 5-inch display and advanced GPS technology. This model is designed for ease of use, with a straightforward interface that appeals to both novice and experienced users. It offers real-time tracking and position monitoring, making it ideal for coastal cruising and fishing. The CP500 supports various cartography formats, providing flexibility for users who prefer different map sources.

Moving on, the CP180I model stands out with its innovative integrated design, packing a 7-inch display and multiple advanced features into a compact unit. It includes built-in Wi-Fi, allowing users to connect their mobile devices and access updates or weather information directly from the display. The CP180I is also compatible with a wide range of NMEA 2000 devices, offering greater customization options for boaters looking to expand their electronic setups.

The CP180 offers similar capabilities but focuses on a slightly larger 8-inch screen. This model enhances visibility and provides an intuitive experience with its touch-screen interface. It supports various navigation modes and features such as AIS overlay and radar integration, which significantly improve situational awareness on the water.

Finally, the Standard Horizon CP300 is a versatile chart plotter that combines advanced features with exceptional user-friendliness. This model features a 9-inch display that offers crisp visuals and enhanced readability even in bright sunlight. It also stands out for its robust integration capabilities with other marine instruments. The CP300 includes built-in Bluetooth and Wi-Fi, allowing for wireless data sharing and connectivity with smart devices.

Overall, the Standard Horizon line of chart plotters, including the CPV550, CP500, CP180I, CP180, and CP300, offers advanced technological features, reliable performance, and user-friendly interfaces, making them excellent choices for both leisure and professional mariners alike. With a focus on connectivity, visibility, and customizable options, these devices enhance the navigation experience on the water.
Top Page Image Contents