Standard Horizon CP500 owner manual Technical Tests, System Test, RAM Menu reset, DIM Menu

Page 79

17. TECHNICAL TESTS

17.0SYSTEM TEST

If you have connected your GPS Chart Plotter according to the instructions, and chosen the proper menu selection for your device, and are still having problems with your GPS Chart Plotter, the extended auto-test should help determine the problem. Make sure the GPS Chart Plotter is turned Off. While pressing and holding [CLR], turn the GPS Chart Plotter On. A new menu will appear on the display:

Figure 17.0 - System Test

Use the ShuttlePoint knob to select the desired test. Choose the test, press [ENT]. To exit from any submenu press [CLR]. To exit from the System Test turn Off the GPS Chart Plotter.

17.0.0 RAM Menu (reset)

NOTE

After performing a RAM Clear all Marks, Routes and tracks will be erased. To back up these points refer to Section 11 for details.

This test verifies the integrity of the memories and if desired during this test all the internal memory can be erased and the default setting restored.

RAM Clear

To clear internal memory. If the GPS Chart Plotter exhibits unusual operations, or appears to be malfunctioning, it may be possible to correct the problem by clearing RAM.

This operation will erase all Marks, Routes, stored Track plots and Destinations. It will also return all selections (Input Data Format, Autopilot selection, etc.) to original default values. To confirm clear RAM press [ENT] again (but if at this time you do not wish to clear RAM press [CLR]).

17.0.1 DIM Menu

To select the desired value for brightness and keypad light.

Contrast

Each time you move the ShuttlePoint knob to right, the screen will decrease brightness, move it to the left to increase brightness.

CP500

Page 81

Page 78 Page 80
Image 79
Page 78 Page 80
Contents CP500 FCC Compliance Statement Cleaning Procedure for the GPS Chart Plotter Screen CP500 Table of Contents Pages RoutesTracks User C-CARDTechnical Tests SpecificationsAppendix Terms Analitycal Index CP500 Part Code IntroductionGeneral Information Packing ListModel Number Description Optional Accessories Radar Unit Supplied by SI-TEX USAMenu Mounting the GPS Chart PlotterGetting Started Bracket MountingFlush mounting the antenna External GPS Antenna MountingPWR & ACC 1 Cable Battery ConnectionsGPS cable GPS antenna connectionsBOX Fish Finder Nmea ConnectionsSend or Receiving RTE and WPL Personal Computer Connection / SetupSetting UP the COM Port Select SEND/REC RTE&MARKS and press ENTVHF Connections ACC 2 ConnectorVGA Video Output · Two Ntsc or PAL Video Inputs · One VGA outputQuick Activation by Soft Keys Quick Activation by pressing CLR for 1 secondControls and Connections Controls and IndicatorsAlphanumeric keys Getting Started Power On, Off and ShuttlePoint knob operationCursor and Menu selection speed Cursor Vs. Home ModeCursor Mode Home modeSelecting North Up or Course Up Changing the backlight and contrastAdjusting Time Adjusting the TimeSelecting Loran TD or Other Coordinate System Changing the Chart ColorCustomizing the Soft Keys Selecting Pages with Soft KeysKeypad Beep Other Settings in General Setup MenuTime Setup Date FormatAbout Port Services Using Find Services & More FunctionOther Available Searches Quick Info On Lakes Info on LakesFull Info On Lakes 1a Example of picture associated to the Fishing object CP500 Inserting the C-CARD New Data FeaturesNew Presentation Features MAP MAX OverviewCP500 Zoom Type Fonts & SymbolsMAP Functions MAX Functions MenuDynamic Nav-Aids Perspective ViewZoom Data Off Currents PredictionHow to show the pictures or diagrams of a Multimedia Object Pictures & DiagramsEnhanced Port Info Mark Creating a NEW Mark Using the ChartCreating Marks Editing a MarkMoving a Mark or Waypoint Deleting a Mark or WaypointMARKS/WAYPOINTS List Goto Cursor CREATING/MODIFY a NEW Mark in the User Points ListGoto Cursor Goto Mark Goto RouteCP500 Placing a MOB Point MAN Over Board MOB FunctionDeleting a MOB Point CP500 Routes Creating a Route Using WaypointsChanging Name to a Route Making Additional Routes Creating a Route Using Marks on the ChartBy select Route Other Settings in Route MenuInserting a Waypoint Into a Route Goto a RouteCP500 Tracking TracksENT Other Settings in Track MenuUsing the Trip LOG Saving and starting a new TrackResetting the Trip Log CP500 User C-CARD Menu User C-CARDFormatting the User C-CARD Changing the User C-CARD Transferring files to the optional User C-CARDLoading a file Deleting a file from the User C-CARD· Selection by Menu Pages· Selection by Soft KEY Additional Functions on Chart ChartWindow Selections Turning Off Information on Icon Points Display Mode12.0.3.3 Chart Settings 12.0.3.0 Marine Settings12.0.3.1 Depth Settings 12.0.3.2 Land SettingsUnderwater Object Settings Customizing the Map ConfigurationsCustomizing the Data Windows Highway NavigationChanging to and from Daylight Savings time CelestialGPS Status Changing dateChanging the Nmea page Windows Nmea DisplayNmea DEPTH, Wind SPEED, Temp and SOG Trend Pages Nmea DataVHF Digital Selective Calling Position Request DSC Distress CallINPUT/OUTPUT Nmea Connection Advanced SettingsNavigate Compass AlarmsGrounding Alarm CP500 AIS System Definitions AISAIS Menu To SET the Chart Plotter for Receiving AISQuick Info on AIS Target MAP Weather Service Menu MAP Weather ServiceLoad From File Real Time View ForecastType of Data Troubleshooting CP500 DIM Menu RAM Menu resetTechnical Tests System TestCard Test Card ConnectorBacklight Internal Data Base TestMAP NT +/MAX C-CARD SpecificationsCP500 Flush Mount cutout Dimensions are in mm Physical Characteristics GPS Waas Smart Receiver SpecificationsCP500 Appendix Terms Page Altitude Analitycal IndexMAX Overview A N D a R D H O R I Z O N L I M I T E D W a R R a N T Y Please Note
Related manuals
Manual 42 pages 55.96 Kb

CP500 specifications

Standard Horizon is well known for its innovative marine electronics, particularly its line of chart plotters and multifunction displays. Among its popular products are the CPV550, CP500, CP180I, CP180, and CP300 models, each designed to enhance navigational experience for boaters and sailors.

The Standard Horizon CPV550 is a cutting-edge chart plotter that features a bright, high-resolution 5.5-inch color display. This model supports Navionics and C-MAP charts, ensuring users have access to high-quality cartography. Its built-in GPS receiver offers exceptional accuracy and fast position fixes, while its user-friendly interface allows for easy navigation through menus and functions. The CPV550 is equipped with a variety of connectivity options, including NMEA 0183, allowing for seamless integration with other onboard electronics.

The CP500 is another robust option, featuring a 5-inch display and advanced GPS technology. This model is designed for ease of use, with a straightforward interface that appeals to both novice and experienced users. It offers real-time tracking and position monitoring, making it ideal for coastal cruising and fishing. The CP500 supports various cartography formats, providing flexibility for users who prefer different map sources.

Moving on, the CP180I model stands out with its innovative integrated design, packing a 7-inch display and multiple advanced features into a compact unit. It includes built-in Wi-Fi, allowing users to connect their mobile devices and access updates or weather information directly from the display. The CP180I is also compatible with a wide range of NMEA 2000 devices, offering greater customization options for boaters looking to expand their electronic setups.

The CP180 offers similar capabilities but focuses on a slightly larger 8-inch screen. This model enhances visibility and provides an intuitive experience with its touch-screen interface. It supports various navigation modes and features such as AIS overlay and radar integration, which significantly improve situational awareness on the water.

Finally, the Standard Horizon CP300 is a versatile chart plotter that combines advanced features with exceptional user-friendliness. This model features a 9-inch display that offers crisp visuals and enhanced readability even in bright sunlight. It also stands out for its robust integration capabilities with other marine instruments. The CP300 includes built-in Bluetooth and Wi-Fi, allowing for wireless data sharing and connectivity with smart devices.

Overall, the Standard Horizon line of chart plotters, including the CPV550, CP500, CP180I, CP180, and CP300, offers advanced technological features, reliable performance, and user-friendly interfaces, making them excellent choices for both leisure and professional mariners alike. With a focus on connectivity, visibility, and customizable options, these devices enhance the navigation experience on the water.
Top Page Image Contents