Standard Horizon CP500 Saving and starting a new Track, Other Settings in Track Menu, Ent

Page 54

Figure 10.0 - Tracking

10.0.0 Saving and starting a new Track

A Track is automatically saved to memory. To start a new Track:

1. Press [MENU]. Move the ShuttlePoint knob to highlight USER POINTS and press

[ENT].

2. Move the ShuttlePoint knob to highlight TRACK and press [ENT].

3. Move the ShuttlePoint knob to highlight ACTIVE TRACK and press [ENT] or move the ShuttlePoint knob to the right.

4. Move the ShuttlePoint knob up/down to select the next available open Track and press [ENT] or move the ShuttlePoint knob to the right.

5. Move the ShuttlePoint knob to highlight TRACKING and press [ENT]. Move the ShuttlePoint knob to set On and press [ENT].

6. Press [CLR] or move the ShuttlePoint knob to the left until the Chart page is shown.

7. A new Track now will be laid down.

10.0.1Other Settings in Track Menu

You will notice the Track menu has other selections:

TRACKING

Allows turning on or off the tracking function

ACTIVE TRACK

This selection allows you to save a Track to one of the 5 Tracks available

VISIBLE

Shows or hides a Track shown in ACTIVE TRACK menu

LINE COLOR

Selects the color of the Track line

DELETE

Deletes a Track selected in the ACTIVE TRACK menu

STEP UNIT

Allowable selection are Distance or Time

DISTANCE

Setup the Distance interval the Track point is placed on the Chart page

TIME

Setup the TIME interval the Track point is placed on the Chart page

10.1USING THE TRIP LOG

On the Chart, Navigation, Highway and NMEA Data pages the windows may be customized to show TRIP LOG information.

1. Select one of the pages listed above, press and hold [MENU]. You will notice one of the data boxes will be highlighted.

2. Press [ENT] and move the ShuttlePoint knob to highlight TRIP LOG, press [ENT].

3. A popup window will be shown with Nm (Nautical Mile), Sm (Statute Mile), Km (Kilometer) and RESET. Move the ShuttlePoint knob to select the desired units of measure and press [ENT].

Page 56

CP500

Image 54
Contents CP500 FCC Compliance Statement Cleaning Procedure for the GPS Chart Plotter Screen CP500 Table of Contents User C-CARD RoutesTracks PagesSpecifications Technical TestsAppendix Terms Analitycal Index CP500 Packing List IntroductionGeneral Information Part CodeOptional Accessories Radar Unit Supplied by SI-TEX USA Model Number DescriptionBracket Mounting Mounting the GPS Chart PlotterGetting Started MenuExternal GPS Antenna Mounting Flush mounting the antennaGPS antenna connections Battery ConnectionsGPS cable PWR & ACC 1 CableNmea Connections BOX Fish FinderSelect SEND/REC RTE&MARKS and press ENT Personal Computer Connection / SetupSetting UP the COM Port Send or Receiving RTE and WPLACC 2 Connector VHF ConnectionsVGA Video Output · One VGA output · Two Ntsc or PAL Video InputsQuick Activation by pressing CLR for 1 second Quick Activation by Soft KeysControls and Indicators Controls and ConnectionsAlphanumeric keys Power On, Off and ShuttlePoint knob operation Getting StartedHome mode Cursor Vs. Home ModeCursor Mode Cursor and Menu selection speedChanging the backlight and contrast Selecting North Up or Course UpAdjusting the Time Adjusting TimeChanging the Chart Color Selecting Loran TD or Other Coordinate SystemSelecting Pages with Soft Keys Customizing the Soft KeysDate Format Other Settings in General Setup MenuTime Setup Keypad BeepAbout Using Find Services & More Function Port ServicesOther Available Searches Info on Lakes Quick Info On LakesFull Info On Lakes 1a Example of picture associated to the Fishing object CP500 MAP MAX Overview New Data FeaturesNew Presentation Features Inserting the C-CARDCP500 MAX Functions Menu Fonts & SymbolsMAP Functions Zoom TypePerspective View Dynamic Nav-AidsZoom Currents Prediction Data OffPictures & Diagrams How to show the pictures or diagrams of a Multimedia ObjectEnhanced Port Info Editing a Mark Creating a NEW Mark Using the ChartCreating Marks MarkDeleting a Mark or Waypoint Moving a Mark or WaypointMARKS/WAYPOINTS List CREATING/MODIFY a NEW Mark in the User Points List Goto CursorGoto Cursor Goto Route Goto MarkCP500 MAN Over Board MOB Function Placing a MOB PointDeleting a MOB Point CP500 Creating a Route Using Waypoints RoutesChanging Name to a Route Creating a Route Using Marks on the Chart Making Additional RoutesGoto a Route Other Settings in Route MenuInserting a Waypoint Into a Route By select RouteCP500 Tracks TrackingSaving and starting a new Track Other Settings in Track MenuUsing the Trip LOG ENTResetting the Trip Log CP500 User C-CARD User C-CARD MenuFormatting the User C-CARD Deleting a file from the User C-CARD Transferring files to the optional User C-CARDLoading a file Changing the User C-CARDPages · Selection by Menu· Selection by Soft KEY Chart Additional Functions on ChartWindow Selections Display Mode Turning Off Information on Icon Points12.0.3.2 Land Settings 12.0.3.0 Marine Settings12.0.3.1 Depth Settings 12.0.3.3 Chart SettingsCustomizing the Map Configurations Underwater Object SettingsCustomizing the Data Windows Navigation HighwayChanging date CelestialGPS Status Changing to and from Daylight Savings timeNmea Display Changing the Nmea page WindowsNmea Data Nmea DEPTH, Wind SPEED, Temp and SOG Trend PagesVHF Digital Selective Calling DSC Distress Call Position RequestAdvanced Settings INPUT/OUTPUT Nmea ConnectionNavigate Alarms CompassGrounding Alarm CP500 AIS AIS System DefinitionsTo SET the Chart Plotter for Receiving AIS AIS MenuQuick Info on AIS Target MAP Weather Service MAP Weather Service MenuLoad From File Forecast Real Time ViewType of Data Troubleshooting CP500 System Test RAM Menu resetTechnical Tests DIM MenuInternal Data Base Test Card ConnectorBacklight Card TestSpecifications MAP NT +/MAX C-CARDCP500 Flush Mount cutout Dimensions are in mm GPS Waas Smart Receiver Specifications Physical CharacteristicsCP500 Appendix Terms Page Analitycal Index AltitudeMAX Overview Please Note A N D a R D H O R I Z O N L I M I T E D W a R R a N T Y
Related manuals
Manual 42 pages 55.96 Kb

CP500 specifications

Standard Horizon is well known for its innovative marine electronics, particularly its line of chart plotters and multifunction displays. Among its popular products are the CPV550, CP500, CP180I, CP180, and CP300 models, each designed to enhance navigational experience for boaters and sailors.

The Standard Horizon CPV550 is a cutting-edge chart plotter that features a bright, high-resolution 5.5-inch color display. This model supports Navionics and C-MAP charts, ensuring users have access to high-quality cartography. Its built-in GPS receiver offers exceptional accuracy and fast position fixes, while its user-friendly interface allows for easy navigation through menus and functions. The CPV550 is equipped with a variety of connectivity options, including NMEA 0183, allowing for seamless integration with other onboard electronics.

The CP500 is another robust option, featuring a 5-inch display and advanced GPS technology. This model is designed for ease of use, with a straightforward interface that appeals to both novice and experienced users. It offers real-time tracking and position monitoring, making it ideal for coastal cruising and fishing. The CP500 supports various cartography formats, providing flexibility for users who prefer different map sources.

Moving on, the CP180I model stands out with its innovative integrated design, packing a 7-inch display and multiple advanced features into a compact unit. It includes built-in Wi-Fi, allowing users to connect their mobile devices and access updates or weather information directly from the display. The CP180I is also compatible with a wide range of NMEA 2000 devices, offering greater customization options for boaters looking to expand their electronic setups.

The CP180 offers similar capabilities but focuses on a slightly larger 8-inch screen. This model enhances visibility and provides an intuitive experience with its touch-screen interface. It supports various navigation modes and features such as AIS overlay and radar integration, which significantly improve situational awareness on the water.

Finally, the Standard Horizon CP300 is a versatile chart plotter that combines advanced features with exceptional user-friendliness. This model features a 9-inch display that offers crisp visuals and enhanced readability even in bright sunlight. It also stands out for its robust integration capabilities with other marine instruments. The CP300 includes built-in Bluetooth and Wi-Fi, allowing for wireless data sharing and connectivity with smart devices.

Overall, the Standard Horizon line of chart plotters, including the CPV550, CP500, CP180I, CP180, and CP300, offers advanced technological features, reliable performance, and user-friendly interfaces, making them excellent choices for both leisure and professional mariners alike. With a focus on connectivity, visibility, and customizable options, these devices enhance the navigation experience on the water.