SUPER MICRO Computer H8DMT I/O Port and Control Panel Connections, Support, Maximum Memory

H8DMT/H8DMT-IBX/H8DMT-F/H8DMT-IBXF User’s Manual

Support

The H8DMT/H8DMT-IBX/H8DMT-F/H8DMT-IBXF Serverboards support single or dual-channel, DDR2-800/667/533 registered ECC SDRAM.

Only interleaved memory is supported, so you must populate two DIMM slots at a time.

Populating two adjacent slots at a time with memory modules of the same size and type will result in interleaved (128-bit) memory, which is faster than non-interleaved (64-bit) memory.

Maximum Memory

For the latest information on the maximum memory for the H8DMT serverboard, please visit the http://www.supermicro.com web site.

2-5 I/O Port and Control Panel Connections

The I/O ports are color coded in conformance with the PC99 specification to make setting up your system easier. See Figure 2-7below for the colors and locations of the various I/O ports.

Figure 2-7. I/O Port Locations and Definitions

Dedicated

LAN Port

LAN1	LAN2	InfiniBand
		Port

USB 0/1	COM1 Port	VGA Port
Ports	(Turquoise)	(Blue)

NOTE: The InfiniBand port is only available for the H8DMT-IBX/H8DMT-IBXF serverboards.

NOTE: The dedicated LAN port above the USB ports is only present for H8DMT-F/H8DMT-IBXFserverboards.

2-6