Chapter 2: Installation
State | Indication |
Solid | Overheat |
|
|
Blinking | Fan Fail |
|
|
NIC2 (LAN2) LED
The LED connections for LAN2 are on pins 9 and 10 of JF1. Attach LAN LED cables to display network activity. See the table below for pin definitions.
Pin# | Definition |
9Vcc
10NIC2
NIC1 (LAN1) LED
The LED connections for LAN1 are on pins 11 and 12 of JF1. Attach LAN LED cables to display network activity. See the table below for pin definitions.
Pin# | Definition |
|
|
11Vcc
12NIC1
HDD LED
The HDD LED connection is located on pins 13 and 14 of JF1. Attach the hard drive LED cable here to display disk activity (for any hard drives on the system, including SAS, Serial ATA and IDE). See the table below for pin definitions
Pin# | Definition |
|
|
13Vcc
14HD Active
Power On LED
The Power On LED connector is located on pins 15 and 16 of JF1. This connection is used to provide LED indication of power being supplied to the system. See the table below for pin definitions.
Pin# | Definition |
|
|
155V Stby
16Control