SUPER MICRO Computer H8DMT Advanced Settings Menu, System Time/System Date, Bios Features Submenu

Page 46

H8DMT/H8DMT-IBX/H8DMT-F/H8DMT-IBXF User’s Manual

System Time/System Date

You can edit this field to change the system time and date. Highlight System Time or System Date using the <ARROW> keys. Enter new values through the keyboard. Press the <TAB> key or the <ARROW> keys to move between fields. The date must be entered in DAY/MM/DD/YYYY format. The time is entered in HH:MM:SS format. Please note that time is in a 24-hour format. For example, 5:30 A.M. appears as 05:30:00 and 5:30 P.M. as 17:30:00.

4-4 Advanced Settings Menu

The submenus in the ADVANCED SETTINGS menu are listed in Table 4-1through Table 4-12below.

 

Table 4-1. BIOS Features Submenu

 

 

Menu Item

Description

Quick Boot

If Enabled, this option will skip certain tests during POST to reduce the time

needed for the system to boot up. The options are Enabled and DISABLED.

 

Quiet Boot

If Disabled, normal POST messages will be displayed on boot-up. If Enabled,

this display the OEM logo instead of POST messages.

 

OS Installation

Change this setting if using a 64-bit Linux operating system. The available

options are Other and LINUX.

 

Interrupt 19 Capture

Select Enabled to allow ROMs to trap Interrupt 19. The options are ENABLED and

Disabled.

 

 

This setting controls the system response when an error is detected during the

Wait for F1 if Error

boot sequence. When enabled, BIOS will stop the boot sequence when an error

is detected, at which point you will need to press the F1 button to re-enter the

 

 

BIOS setup menu. The options are Enabled and DISABLED.

 

 

ACPI Mode

Use this setting to determine whether ACPI mode will be used. The options are

Yes and NO.

 

Advanced ACPI Configuration Submenu

MCP55 ACPI HPET Table

ACPI Version Features

ACPI APIC

Support

AMI OEMB Table

Headless Mode

Determines whether to enable or disable the MCP55 ACPI HPET table. Options are Enabled or DISABLED.

Use this setting the determine which ACPI version to use. Options are ACPI v1.0, ACPI V2.0 and ACPI V3.0.

Determines whether to include the ACPI APIC table pointer in the RSDT pointer list. The available options are Enabled and DISABLED.

Determines whether to include the AMI OEMB table pointer in the RSDT pointer list. The available options are Enabled and DISABLED.

Use this setting to ENABLE or Disable headless operation mode through ACPI. This setting is used to update the ACPI FACP table to indicate headless operations without a monitor.

General WHEA Configuration Submenu

4-2

Image 46
Contents H8DMT/H8DMT-F H8DMT-IBX/H8DMT-IBXF H8DMT/H8DMT-IBX/H8DMT-F/H8DMT-IBXF User’s Manual About this Manual PrefaceManual Organization H8DMT/H8DMT-IBX/H8DMT-F/H8DMT-IBXF User’s Manual Table of Contents I/O Port and Control Panel Connections Appendix B Bios Post Checkpoint Codes Viii Chapter Introduction ChecklistOverview Images and Layouts H8DMT/H8DMT-IBX Family Serverboard ImageH8DMT-F/H8DMT-IBXF Family Serverboard Image H8DMT-IBX/H8DMT-IBXF Family Serverboard Layout Jumpers ConnectorsQuick Reference LEDsServerboard Features CPUNVidia MCP55 Pro Chipset System Block Diagram Chipset OverviewPC Health Monitoring Power Configuration Settings Power Supply Super I/OContacting Supermicro HeadquartersReturning Merchandise for Service Installation Procedure Chapter InstallationPrecautions Static-Sensitive DevicesProcessor and Heatsink Installation Removing the CPU Cover PlatePlacing the CPU into the Socket Mounting the Mainboard into a Chassis Secure the CPU with Socket LeverInstalling Memory Side and Top Views of DDR InstallationSupport I/O Port and Control Panel ConnectionsMaximum Memory Power Connector Connector DefinitionsFront Control Panel Reset Connector Auxiliary Power ConnectorPwon Connector Overheat/Fan Fail LED OHPower On LED NIC2 LAN2 LEDUniversal Serial Bus Ports NMI ButtonUSB Headers LAN1/2 Ethernet Ports Serial PortsFan Headers Dedicated LAN Ethernet PortWake-On-LAN Overheat LEDChassis Intrusion SMBus HeaderPower I2C Jumper SettingsExplanation of Jumpers LAN Controller Enable/Disable Cmos ClearWatch Dog Enable/Disable BMC/Video Enable/DisableI2C to PCI-Express Slot Power LED Onboard IndicatorsInfiniBand Port Enable/Disable InfiniBand LED IndicatorsEnabling Sata RAID Drive ConnectionsSata Ports Installing the OS/SATA Driver Building a Driver DisketteInstalling Drivers Installing the OS and Drivers10. Driver/Tool Installation Display Screen Before Power On Chapter TroubleshootingTroubleshooting Procedures No PowerMemory Errors Technical Support ProceduresLosing the System’s Setup Configuration Frequently Asked Questions Returning Merchandise for Service Introduction Starting the Setup UtilityChapter Main MenuBios Features Submenu Advanced Settings MenuSystem Time/System Date Sata Configuration Submenu Last StatePCI/PnP Configuration Submenu MWDMA0. MDWDMA1, MWDMA2, UDMA0. UDMA1, UDMA2, UDMA3NorthBridge Configuration Submenu Advanced Chipset Control SubmenuSouthBridge/MCP55 Configuration Submenu Processor & Clock Options SubmenuDMI Event Logging Submenu I/O Device Configuration Submenu10. Console Redirection Submenu 12. Ipmi Configuration 11. Hardware Health Monitor SubmenuSecurity Menu Boot Menu13. Boot Menu 14. Security MenuExit Menu 15. Exit MenuAppendix a Bios Error Beep Codes Table A-1. Amibios Error Beep CodesH8DMT/H8DMT-IBX/H8DMT-F/H8DMT-IBXF User’s Manual Bootblock Recovery Codes Appendix B Bios Post Checkpoint CodesUncompressed Initialization Codes Chipset Last page for additional information Above 1 MB next 82h A3h Disclaimer H8DMT/H8DMT-IBX/H8DMT-F/H8DMT-IBXF User’s Manual