H8DMT/H8DMT-IBX/H8DMT-F/H8DMT-IBXF User’s Manual
Checkpoint | Code Description | |
A3h | The soft error display has completed. Setting the keyboard typematic rate next. | |
A4h | The keyboard typematic rate is set. Programming the memory wait states next. | |
|
| |
A5h | Memory wait state programming is over. Clearing the screen and enabling parity | |
and the NMI next. | ||
| ||
A7h | NMI and parity enabled. Performing any initialization required before passing | |
control to the adaptor ROM at E000 next. | ||
| ||
|
| |
A8h | Initialization before passing control to the adaptor ROM at E000h completed. | |
Passing control to the adaptor ROM at E000h next. | ||
| ||
A9h | Returned from adaptor ROM at E000h control. Performing any initialization | |
required after the E000 option ROM had control next. | ||
| ||
|
| |
Aah | Initialization after E000 option ROM control has completed. Displaying the | |
system configuration next. | ||
| ||
Abh | Uncompressing the DMI data and executing DMI POST initialization next. | |
|
| |
B0h | The system configuration is displayed. | |
B1h | Copying any code to specific areas. | |
|
| |
00h | Code copying to specific areas is done. Passing control to INT 19h boot loader | |
next. | ||
| ||
|
|