Furuno FI-504 manual Display description, Depth category, Speed category

Page 12

1. OPERATION

1.4.1Display description

Depth category

Display title

Indication

Function

Current depth

DPTH

Current depth, in meters, feet or fathoms.

Shallow alarm

SHALLOW

Set shallow depth alarm. Audio and visual

 

 

alarms are released when the depth is

 

 

lower than the threshold value.

Deep alarm

DEEP

Set deep depth alarm. Audio and visual

 

 

alarms are released when the depth is

 

 

higher than the threshold value.

Shallow anchor

SHALLOW

Set shallow anchor alarm. Audio and visual

alarm

 

alarms are released when the depth is

 

 

lower than the threshold value.

Deep anchor

DEEP

Set deep anchor alarm. Audio and visual

alarm

 

alarms are released when the depth is

 

 

higher than the threshold value.

Speed category

Display title

Indication

Function

Boat speed

SPD

Boat speed, in knots (kt), miles per hour

 

 

(MPH) or kilometers per hour (KMH).

Maximum STW

SPD MAX

Maximum boat speed, in knots (kt), miles

 

 

per hour (MPH) or kilometers per hour

 

 

(KMH).

Average STW

SPG AVG

Average boat speed, in knots (kt), miles per

 

 

hour (MPH) or kilometers per hour (KMH).

SOG

SOG

Speed over ground, in knots (kt), miles per

 

 

hour (MPH) or kilometers per hour (KMH).

Maximum SOG

SOG MAX

Maximum speed over ground, in knots (kt),

 

 

miles per hour (MPH) or kilometers per

 

 

hour (KMH).

Average SOG

SOG AVG

Average speed over ground, in knots (kt),

 

 

miles per hour (MPH) or kilometers per

 

 

hour (KMH).

VMG to windward

VMG

Velocity made good to windward, in knots

 

 

(kt), miles per hour (MPH) or kilometers per

 

 

hour (KMH).

Log

LOG

Log distance (total distance run), in nautical

 

 

miles, (NM) kilometers (KM) or statute

 

 

miles (SM).

Trip

TRIP

Trip distance (distance run between two

 

 

points), in nautical miles (NM), kilometers

 

 

(KM) or statute miles (SM).

4

Image 12
Contents FI-504 Multi Instrument 00016733410 Important Notices Safety Instructions Table of Contents Foreword Word to the Owner of the FI-504System Configuration Standalone configurationNmea 2000 network Nmea 2000 SensorsOperation Operating Controls, Display LayoutTurning the Power On/Off Adjusting Brilliance and ContrastSelecting a Display DepthDisplay description Depth categorySpeed category Timer category Wind categoryHeading category Navigation categoryEnvironment category Autopilot categoryEngine category Resetting Counters and Indications Selecting Apparent or True Wind Angle, Wind SpeedAlarms MAX38.9 LO9.7 12.2Alarm description Timers Count-up timerCount-down timers How to set the timersOperation MAINTENANCE, Troubleshooting Preventive MaintenanceTroubleshooting Installation Equipment ListsStandard supply Optional supplyMounting Surface mount 1 Fix instrument from front panelSurface mount 2 Fix instrument from rear panel Wiring Multi-instrument configurationJunction box option Terminal resistor Sensor FI-50x FI-50x FI-50xSetting Up Setup1 menuOff OFF SPD RES LOC Setup2 menu OFFSetup2 menu items Press the SELECT/CLEAR Specifications Packing フラッシュマウントキット Jul.2407 R.Esumi Jul.2407 R.Esumi Jul.2407 R.Esumi Instrument タッピンネジ用穴(4ヵ所) For tapping screws 4 pcs