Furuno FI-504 manual Mounting, Surface mount 1 Fix instrument from front panel

Page 24

3. INSTALLATION

3.2Mounting

The display unit can be installed two ways: surface mount (fixed at front panel or fixed from rear panel) and flush mount (optional kit required). This section covers surface mounting. For flush mounting, see the flush mounting instructions, issued separately.

Surface mount 1: Fix instrument from front panel

1.Using the template at the back of this manual, open a mounting hole in the installation site.

2.Detach the front panel together with the keypad assy. Attach sponge (supplied) to rear of display unit.

3.Set the display unit to the mounting hole, and fix it with four self-tap- ping screws (3×20, supplied).

4.Attach the front panel and keypad assy. to the display unit.

Keypad Assy.

Sponge

Mounting

Hole

Front Panel

Self-tapping screw (3x20)

16

Image 24

Contents FI-504 Multi Instrument 00016733410 Important Notices Safety Instructions Table of Contents Foreword Word to the Owner of the FI-504System Configuration Standalone configurationNmea 2000 network Nmea 2000 SensorsOperation Operating Controls, Display LayoutTurning the Power On/Off Adjusting Brilliance and ContrastSelecting a Display DepthDisplay description Depth categorySpeed category Timer category Wind categoryHeading category Navigation categoryEnvironment category Autopilot categoryEngine category Resetting Counters and Indications Selecting Apparent or True Wind Angle, Wind SpeedAlarms MAX38.9 LO9.7 12.2Alarm description Timers Count-up timerCount-down timers How to set the timersOperation MAINTENANCE, Troubleshooting Preventive MaintenanceTroubleshooting Installation Equipment ListsStandard supply Optional supplyMounting Surface mount 1 Fix instrument from front panelSurface mount 2 Fix instrument from rear panel Wiring Multi-instrument configurationJunction box option Terminal resistor Sensor FI-50x FI-50x FI-50xSetting Up Setup1 menuOff OFF SPD RES LOC Setup2 menu OFFSetup2 menu items Press the SELECT/CLEAR Specifications Ｐａｃｋｉｎｇﾌﾗｯｼｭﾏｳﾝﾄｷｯﾄ Jul.2407 R.Esumi Jul.2407 R.Esumi Jul.2407 R.Esumi Instrument タッピンネジ用穴（4ヵ所） For tapping screws 4 pcs