Lowrance electronic Fish Finder manual Delete a Trail, Display a Saved Trail, Edit a Trail Name

Delete a Trail

This is the command used to erase or delete a trail.

1.Press MENUMENU↓ to MY TRAILSENT↓ to trail nameENT.

2.Press → to DELETE TRAILENT← to YESENT.

Tip:

You can also delete all trails at once.

1.Press MENUMENU↓ to MY TRAILSENT.

2.Press → to DELETE ALLENT← to YESENT.

Display a Saved Trail

The active trail is automatically visible on the plotter display with the factory default settings. You can selectively turn the trail display off and on for any saved or active trail.

To turn off trail display:

1.Press MENUMENU↓ to MY TRAILSENT.

2.Press ↓↓ to enter the Saved Trail list, then use ↑ or ↓ to select the desired Trail NameENT.

3.Press ↓ to ACTIVE→ to VISIBLEENT. To return to the previous page, press EXIT repeatedly.

To turn on trail display:

1.Press MENUMENU↓ to MY TRAILSENT.

2.Press ↓↓ to enter the Saved Trail list, then use ↑ or ↓ to select the desired Trail NameENT.

3.Press ↓ to ACTIVE→ to VISIBLEENT. To return to the previous page, press EXIT repeatedly.

Edit a Trail Name

1.Press MENUMENU↓ to MY TRAILSENT↓ to trail nameENTENT.

2.Press ↑ or ↓ to change the first character, then press → to the next character and repeat until the name is correct. Press ENT. Press EXIT repeatedly to return to the main display.

Tip:

You can quickly call up the Edit Trail menu by selecting a trail on the plotter with the cursor. Simply move the cursor over a trail and a pop-up box appears. Press WPT and the Edit Trail menu opens.

69