Coordinate System Selection
The Coordinate System Menu lets you select the coordinate system to use when displaying and entering position coordinates.
Menus for changing coordinate system used to display positions.
To get to Coordinate System Selection:
1.Press MENUMENU↓ to GPS SETUPENT.
2.Press ↓ to COORDINATE SYSTEMENT.
To change the coordinate system
1.Press ENT while COORDINATE SYSTEM is highlighted.
2.Press the arrow keys to highlight the desired format. Press ENT to select it. Press EXIT to close the menus.
Configure Loran TD menu.
To setup Loran TD:
1.If the Loran TD conversion is chosen, you must enter the local Loran chain identification for the master and slaves.
2.Select SETUP LORAN TD at the bottom of the Coordinate System menu and select the ID. Press EXIT to close this menu.
83