NOTE:
If you are already located at or near the beginning of your trail, the arrival alarm will go off as soon as you press Enter. Just press EXIT to clear the alarm and proceed.
5. When you reach your destination, cancel navigation.
Figure 1 |
| Figure 2 |
|
|
|
Figure 3
Figure 4
Navigate a trail menu sequence: Fig. 1, My Trails command. Fig. 2, Trails Menu. Fig. 3, Edit Trail Menu. Fig. 4, Edit Route Menu with Navigate command highlighted for Trail 1. A trail is always converted to a "route" when you navigate the trail.
On the Plotter Page, the trail you are navigating is represented by a flashing line. The Navigation Page will also show the navigated trail as a flashing line. The bearing arrow on the compass rose points to the next waypoint on the trail.
71