Navigate a Route backward
Here's how you run a route backward, from the end waypoint to the beginning waypoint:
1.From the NAVIGATION PAGE, press MENUENT or from the PLOTTER PAGE, press MENUMENU↓ to ROUTE PLANNINGENT.
2.Press ↓ to select route nameENT↓ to NAVIGATE→ to RE-
VERSEENT← to NAVIGATEENT.
3. Upon arrival at your destination, cancel navigation:
press MENUMENU↓ to CANCEL NAVIGATIONENT← to YESENT.
Figure 1. | Figure 2. | Figure 3. |
Figure 4. | Figure 5. | Figure 6. |
Navigating along a route: Figs. 1 & 4 show the Plotter Page (top) and Navigation Page (bottom) while running a route. Boater is heading straight for waypoint 3. In Figs. 2 & 5, the traveler has arrived at Wpt 3; the arrival alarm has been triggered and the bearing arrow on the compass rose has turned to point toward Wpt 4, off to the northeast. In Figs. 3 & 6 the traveler has turned northeast on his new course and is
heading straight for Wpt 4, which is 0.43 miles away.
78