Parameter tables for
•Some parameters specify an option code. Where applicable, the options codes will be in a bulleted list in the Name/Description column.
•The default values apply to all models unless otherwise noted for each parameter...
•Some parameters cannot be edited during Run Mode, and certain Software Lock settings (B_31) can prohibit all edits. If in doubt, place the inverter in Stop Mode or consult the inverter manual for details.
“F” Group: Main Profile Parameters
Func. | Name / Description | Default | Set | ||
Code | Value | Value | |||
|
| ||||
|
|
|
| ||
|
|
|
| ||
F_01 | Output frequency setting | 0.0 |
| ||
|
|
|
| ||
F_02 | Acceleration (1) time setting | 10.0 |
| ||
|
|
|
| ||
F_03 | Deceleration (1) time setting | 10.0 |
| ||
|
|
|
| ||
F_04 | Keypad Run key routing | 00 |
| ||
| • 00 Forward | • 01 Reverse |
|
| |
|
|
|
|
| |
14