•Potentiometer – Allows an operator to directly set the motor speed when the potentiometer is enabled for output frequency control.
•Potentiometer Enable LED – ON when the potentiometer is enabled for value entry.
•Parameter Display – A
•Display Units: Hertz/Amperes – One of these LEDs will be ON to indicate the units associated with the parameter display.
•Power LED – ON when the power input to the inverter is ON.
•Function Key – This key is used to navigate through the lists of parameters and functions for setting and monitoring parameter values.
•Up/Down Keys – Use these keys alternately to move up or down the lists of parameter and functions shown in the display, and to increment/decrement values.
•Store Key – When the unit is in Program Mode and the operator has edited a parameter value, press the Store key to write the new value to the EEPROM.
6