Honda Power Equipment T32, T38, T35, T30, T40, T27, T20, T25, T24

om_T40_2006_D-GB-F.book Page 27 Jeudi, 29. juin 2006 4:03 16

ASSEMBLY

8.Slide the oar [5] between the bottom of the boat and the ground to hold the deck [6] flat.

9.T25 AE1: Place a short stringer [9] centred on floor elements no. 2 and no. 3.

T30 AE1: Place a stringer [9] centred on floor element no. 3.

T35 AE1 and T40 AE1: Place a short stringer [3] with a long stringer [4].

10.Place the oar on the other side of the boat and repeat step 9.

T35 AE1 and T40 AE1: place the two other stringers being careful to reverse the order as shown ([7] and [8]).

11.Fit the bench [10] into place.

CAUTION:

•Do not fully inflate the chambers in one single operation.

•In case of use at high altitude: if the boat was initially inflated at sea level, then transported to a higher altitude (mountain lake, for example), the pressure inside the chambers will have increased. Adjust the pressure before boating.

12.Finish inflating the chambers in several stages so as not to have the pressure in the various chambers out of balance (recommended pressure: 0.25 bar).

13.Check the inflation pressure using the pressure gauge supplied with your boat.

14.Inflate the keel [11] (recommended pressure: 0.35 bar).

15.Secure the oars [12] on the oarlocks [13].

MONTAGE

8.Glisser une pagaie [5] entre le fond du bateau et le sol pour maintenir le plancher [6] à plat.

9.T25 AE1 : Placer un longeron court [9] centré sur les planches n° 2 et n° 3.

T30 AE1 : Placer un longeron [9] centré sur la planche n° 3.

T35 AE1 et T40 AE1 : Placer un longeron court [3] avec un long [4].

10.Placer la pagaie de l’autre côté du bateau et répèter l’étape 9.

T35 AE1 et T40 AE1 : mettre en place les deux autres longerons en prenant soin d’inverser l’ordre comme indiqué [7] et [8].

11.Mettre le banc [10] en place.

PRÉCAUTION:

•Ne pas gonfler les chambres entièrement en une seule fois.

•En cas d’utilisation en altitude : si le bateau a été initialement gonflé au niveau de la mer puis monté en altitude (lac de montagne), la pression intérieure des chambres a augmenté. Ajuster la pression avant de naviguer.

12.Finir de gonfler les chambres en plusieurs fois, de manière à ne pas déséquilibrer les pressions des différentes chambres (pression recommandée : 0,25 bar).

13.Vérifier la pression de gonflage à l’aide du manomètre livré avec votre bateau.

14.Gonfler la quille [11] (pression recommandée : 0,35 bar).

15.Fixer les pagaies [12] sur les dames de nage [13].

T27, T25, T20, T32, T24 specifications

Honda Power Equipment offers a diverse line of products designed for efficiency and convenience, catering to both residential and commercial users. Among its notable models are the T35, T38, T24, T32, and T20, each tailored to deliver optimal performance in various applications, from landscaping to outdoor maintenance.

The T35 model stands out with its powerful engine, capable of delivering high torque for efficient cutting and trimming. Its lightweight design enhances maneuverability, making it ideal for extended use without causing fatigue. The T35 also features a semi-automatic feed system, allowing users to operate it with minimal interruptions, ensuring a smooth workflow.

Similarly, the T38 offers increased power and versatility. This model is equipped with advanced anti-vibration technology, which reduces user fatigue during prolonged sessions. The T38 boasts a 4-stroke engine, providing better fuel efficiency compared to 2-stroke alternatives. Its larger cutting swath allows users to cover more ground quickly while maintaining precision.

Next in line, the T24 is perfect for lighter trimming tasks. It is crafted for ease of use, making it an excellent choice for homeowners and small business operators. The T24’s compact size does not compromise its performance, featuring a reliable engine that ensures effective cutting of grass and weeds. The machine is also fitted with intuitive controls, making it accessible for users of all skill levels.

The T32 model combines versatility with power, striking a balance suited for both residential and commercial applications. Its adjustable cutting head allows users to tackle various jobs, from hedging to thick brush clearing. The T32 integrates Honda’s innovative fuel-efficient technology, which minimizes emissions and operating costs, making it an environmentally friendly choice.

Finally, the T20 represents the entry-level option, ideal for casual users and gardeners. Despite its smaller build, the T20 incorporates Honda's reputable quality and reliability. Its easy-start mechanism and lightweight design facilitate quick setup and use, enabling users to focus on the task at hand without hassle.

Overall, Honda’s T-series models embody innovation, efficiency, and user-friendly features, establishing themselves as essential tools in the realm of power equipment. With each model offering specific advantages, users can find the right fit for their unique needs and preferences.