Honda Power Equipment T24, T32, T38, T35, T30, T40, T27, T20 Safety Instructions, Training, Preparation

Page 8

om_T40_2006_D-GB-F.book Page 8 Jeudi, 29. juin 2006 4:03 16

SAFETY INSTRUCTIONS

Headings preceded by the following words must be read very carefully:

Indicates that there is danger of serious bodily injury or even death if instructions are not followed.

CAUTION:

•Indicates that there is a possible risk of bodily injury or equipment damage if instructions are not followed.

SAFETY

TRAINING

NOTE: Source of useful information.

This sign means that you must take care during certain operations. Refer to the safety instructions on the following pages, to the point(s) indicated in the square.

A1. Read the instructions carefully.

A2. Carefully read the instruction manual provided with your outboard engine.

A3. It is the responsibility of the boat operator to learn and know the laws applicable to a boat and abide by them regarding how it is to be equipped and operated.

The applicable laws and regulations in force may change and differ according to the following factors:

-the location where the boat is commissioned,

-the requirements of the local authorities,

-the type of use of the boat,

-the time of day,

-the operating conditions,

-the size, speed, route, the type of boat (power, oars, etc.),

-the navigation mode.

A4. In addition to your knowledge and understanding of the applicable laws, please read and understand the following safety instructions.

PREPARATION

B1. All passengers onboard must wear appropriate clothing and have a life jacket.

B2. Make sure that the boat's standard equipment (oars, air pump and repair kit) is onboard. Survival equipment other than the mandatory items is sometimes necessary.

B3. An individual under the influence of drugs or alcohol is not in condition to pilot a boat.

B4. Do not exceed the maximum load rating and the maximum engine power indicated on the boat manufacturer's plate.

B5. Special attention should be given to wind and tides, as their variation has a certain effect on fuel consumption.

B6. If you plan to navigate in unfamiliar waters, consult with those familiar with the area concerning the possible hazards and dangers.

B7. Always report your time and point of departure, your route and your estimated time of return to someone on shore.

B8. You may have to turn on your navigation lights. Do not navigate in the dark or in hazardous meteorological conditions if correct navigation lighting has not been installed or is not in good working order.

B9. Safe boating and sea survival courses are available in the majority of countries through local and national organisations. It is the duty of all boat operators to know and understand maritime regulations and to inquire about weather conditions before heading out to sea.

B10. Before heading out to sea, it is very important that all survival equipment such as signal flares, first aid kit, anchors, etc. be thoroughly checked.

B11. Do not use a compressed air source (ex.: air compressor) to inflate the boat. Overinflation may cause the seams and/or walls themselves to rupture.

B12. Whether oars or a small outboard motor is used depends on sea conditions. The power may not be enough to counter tidal currents, small channels or shallow water.

B13. RESPECT THE MAXIMUM POWER RATINGS! An excessively powerful motor may cause dangerous maneuvrability and stability difficulties with serious consequences.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents T20 T24 T25 T27 T30 T32 T35 T38 T40 Inhaltsverzeichnis VerwendungContents Tables DES Matières Description GénéraleProtection DE L’ENVIRONNEMENT UmweltschutzEnvironmental Protection Vorbereitung SicherheitshinweiseAusbildung Instandhaltung UND Lagerung EnergieversorgungNavigation Preparation Safety InstructionsTraining Maintenance and Storage RefuellingPréparation Consignes DE SécuritéFormation Maintenance ET Stockage RavitaillementEinführung Siehe Tabelle auf SeiteIntroduction Description of the Codes Used in this ManualSee table, p Explication DES Codes Utilisés Dans CE ManuelAllgemeine Beschreibung Teile DES BootsKennzeichnung DES Boots General Description Description GénéraleDer Verpackung des Boots sind enthalten AuspackenUnpacking DéballageLuftpumpen DOPPELDRUCK-BLASEBALG T24 IE1, T27 IE1, T32 IE1 und T38 IE1Foot Pumps GonfleursTWO-PRESSURE Pump T24 IE1,T27 IE1, T32 IE1 and T38 IE1 Gonfleur Standard sauf T24 IE1, T27 IE1, T32 IE1 et T38 IE1Montage Modelle T20 SE1, T25 SE1 LattenbodenModèles T20 SE1, T25 SE1 planchers lattés AssemblyModels T20 SE1, T25 SE1 slatted flooring Modelle T24 IE1,T27 IE1, T32 IE1, T38 IE1 aufblasbarer Boden OmT402006D-GB-F.book Page 23 Jeudi, 29. juin 2006 403 Modelle T25 AE1, T30 AE1, T35 AE1, T40 AE1 Aluminiumboden Den Kiel nicht vor dem Einsetzen des Bodens aufblasenModels T25 AE1, T30 AE1, T35 AE1, T40 AE1 aluminum decks 35 bar 25 bar OmT402006D-GB-F.book Page 27 Jeudi, 29. juin 2006 403 Verwendung BelastungNavigationsbereich Navigation MIT DEN PaddelnUSE UtilisationAnlegen AbschleppenFestmachen , Ankern Lecks Während DER NavigationDocking TowingMOORING, Anchoring Puncture While UnderwayZerlegen WartungshnweiseReinigen Maintenance EntretienGrosse Reparaturen ReparaturenKleine Reparaturen Repair RéparationsTransport Lagerung LagerungTransport Storage Transport StockageStorage StockageTechnische Daten SE1 AE1 IE1Technical Specifications VIB

T27, T25, T20, T32, T24 specifications

Honda Power Equipment offers a diverse line of products designed for efficiency and convenience, catering to both residential and commercial users. Among its notable models are the T35, T38, T24, T32, and T20, each tailored to deliver optimal performance in various applications, from landscaping to outdoor maintenance.

The T35 model stands out with its powerful engine, capable of delivering high torque for efficient cutting and trimming. Its lightweight design enhances maneuverability, making it ideal for extended use without causing fatigue. The T35 also features a semi-automatic feed system, allowing users to operate it with minimal interruptions, ensuring a smooth workflow.

Similarly, the T38 offers increased power and versatility. This model is equipped with advanced anti-vibration technology, which reduces user fatigue during prolonged sessions. The T38 boasts a 4-stroke engine, providing better fuel efficiency compared to 2-stroke alternatives. Its larger cutting swath allows users to cover more ground quickly while maintaining precision.

Next in line, the T24 is perfect for lighter trimming tasks. It is crafted for ease of use, making it an excellent choice for homeowners and small business operators. The T24’s compact size does not compromise its performance, featuring a reliable engine that ensures effective cutting of grass and weeds. The machine is also fitted with intuitive controls, making it accessible for users of all skill levels.

The T32 model combines versatility with power, striking a balance suited for both residential and commercial applications. Its adjustable cutting head allows users to tackle various jobs, from hedging to thick brush clearing. The T32 integrates Honda’s innovative fuel-efficient technology, which minimizes emissions and operating costs, making it an environmentally friendly choice.

Finally, the T20 represents the entry-level option, ideal for casual users and gardeners. Despite its smaller build, the T20 incorporates Honda's reputable quality and reliability. Its easy-start mechanism and lightweight design facilitate quick setup and use, enabling users to focus on the task at hand without hassle.

Overall, Honda’s T-series models embody innovation, efficiency, and user-friendly features, establishing themselves as essential tools in the realm of power equipment. With each model offering specific advantages, users can find the right fit for their unique needs and preferences.
Top Page Image Contents