Operating this unit
Section
02
#When selecting the FM tuner as the source, you cannot switch to SLA.
#To return to the display of each source, press BAND.
#If you do not operate the audio function within about 30 seconds, the display is automatically re- turned to the source display.
Display | Equalizer curve |
|
|
POWERFUL Powerful
NATURAL Natural
VOCAL Vocal
CUSTOM Custom
FLAT Flat
English
Using balance adjustment
You can change the fader/balance setting so that it can provide you an ideal listening envir- onment in all occupied seats.
1 Press AUDIO to select FADER.
#If the balance setting has been previously ad- justed, BALANCE will be displayed.
2Press a or b to adjust front/rear speak- er balance.
FADER FRONT 15 to FADER REAR 15 is dis- played as the front/rear speaker balance
moves from front to rear.
# FADER 0 is the proper setting when only two
speakers are used.
# When the rear output setting is REAR SP S/W, you cannot adjust front/rear speaker balance. Refer to Setting the rear output and subwoofer controller on page 24.
3Press c or d to adjust left/right speaker balance.
BALANCE LEFT 15 to BALANCE RIGHT 15 is displayed as the left/right speaker balance moves from left to right.
Using the equalizer
The equalizer lets you adjust the equalization to match car interior acoustic characteristics as desired.
Recalling equalizer curves
There are six stored equalizer curves which you can easily recall at any time. Here is a list of the equalizer curves:
SUPERBASS Super bass
!CUSTOM is an adjusted equalizer curve that you create. If you make adjustments to an equalizer curve, the equalizer curve set- ting will be memorized in CUSTOM.
!When FLAT is selected no supplement or correction is made to the sound. This is useful to check the effect of the equalizer curves by switching alternatively between FLAT and a set equalizer curve.
%Press EQ to select the equalizer.
Press EQ repeatedly to switch between the fol- lowing equalizers:
POWERFUL—NATURAL—VOCAL—CUSTOM
—FLAT—SUPERBASS
Adjusting equalizer curves
You can adjust the currently selected equalizer curve setting as desired. Adjusted equalizer curve settings are memorized in CUSTOM.
1Press AUDIO to select EQ.
2Press c or d to select the equalizer band to adjust.
3Press a or b to adjust the level of the equalizer band.
+6 to
or decreased.
# You can then select another band and adjust the level.
Note
If you make adjustments, CUSTOM curve is up- dated.
En 19