CALIBRATION PROCEDURE
WARNING: DURING THE ENTIRE CALIBRATION PROCESS, STAND ON THE PLASTIC SIDE RAILS ONLY! DO NOT STAND ON TREADMILL WALKING BELT!
CALIBRATION
1.Turn off treadmill.
2.Simultaneously press PROGRAM, ENTER, and START/STOP for about 3 seconds.
3.Maximum speed will be shown in the TIME/PACE display followed by an “E” for English units or an “N” for metric units. Press START/STOP to change from English units to metric units.
4.Press ENTER.
5.Press START/STOP. Incline and speed will calibrate simultaneously.
6.When successfully completed, TIME/PACE display will show CAL PASS.
7.Press POWER. Your treadmill is ready for use.
CONVERSION TO METRIC
In order to convert to miles or kilometers, do the following:
1.Press and hold the ENTER key for 5 seconds or until “SI“ is displayed in TIME/PACE window.
2.Release ENTER key.
3.Repeat steps 1 - 2 to convert miles per hour.
4.If the treadmill is in kilometers per hour mode, you will see a “SI” in the TIME/PACE window when you press and hold the ENTER key.
5.If the treadmill is in miles per hour mode, you will see a “ENG” in the TIME/PACE window when you press and hold the ENTER key.
29