GE LM10, Motor Protection System instruction manual Assembly Object, Class Code 4, Instance

CHAPTER 5: COMMUNICATIONS									DEVICENET OPERATIONS
			Data Formats for Device Inputs
	Bit Position				Name			Value
	Bit 7		DeviceNet Stop Issued Last					---
	Bit 6		Reserved					---
	Bit 5		DeviceNet Control					---
	Bit 4		Reserved					---
	Bit 3		Running 2					---
	Bit 2		Running 1					---
	Bit 1		Reserved					---
	Bit 0		Fault					---
	Assembly Object, Class Code 4, Instance 102
	Attribute	Access			Name/Description					Data Type	Value
	3	Get		Poll Data Group 1						see below	see below
				Data Formats for Device Inputs
	Bytes	Data Length			Name/Description		Data			Value
						Format
	7 bytes	1 byte			Motor status	F21			---
		1 word			Phase A current	UINT			⋅ 0.1 A
		1 word			Phase B current	UINT			⋅ 0.1 A
		1 word			Phase C current	UINT			⋅ 0.1 A
	Assembly Object, Class Code 4, Instance 103
	Attribute	Access			Name/Description					Data Type	Value
	3	Get		Poll Data Group 2						see below	see below
				Data Formats for Device Inputs
	Bytes	Data Length			Name/Description		Data			Value
						Format
	12 bytes	1 word			Motor status	F22			---
		1 word			Cause of trip	F20			---
		1 word			Average phase current	UINT			⋅ 0.1 A
		1 word			Ground current	UINT			⋅ 0.1 A
		1 word			Current unbalance	UINT			%
		1 word			Power	UINT			⋅ 0.1 kW
	Assembly Object, Class Code 4, Instance 104
	Attribute	Access			Name/Description					Data Type	Value
	3	Get		Poll Data Group 3						see below	see below

LM10 MOTOR PROTECTION SYSTEM – INSTRUCTION MANUAL 5–51